Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Partner 1996-2008 Owner's Manual Troubleshooting Changing a bulb

127TROUBLESHOOTING8 Changing a bulb CHANGING A BULB Type B Bayonet bulb: press on the bulb then turn it anticlockwise. Type A Entirely glass bulb: pull gently as it is fi tted by pressure. Open the bonnet. To access the bulbs, reach behind the headlamp unit. Carry out the operations in reverse order to refi t each bulb and check that the bonnet is closed securely. Type C Halogen bulb: release the retaining spring from its housing. Halogen bulbs must be changed with the headlamp off. Wait a few minutes (risk of serious burns). Do not touch the bulb directly with your fi ngers, use lint-free cloths. It is normal for condensation to form inside the headlamps. Regular use of the vehicle eliminates this misting. The bulbs must be changed with the ignition off or with the battery disconnected. Wait approximately3 minutes after changing the bulb before reconnecting the battery. Check that the lights operate correctly after each operation. High pressure washing Types of bulb Various types of bulb are installed on your vehicle. To remove them: When using this type of washing on stubborn dirt, do not persist on the headlamps, the lights and their surround to avoid damaging their coating and their seal.
128 Changing a bulb 3.Direction indicatorsType B, PY 21 W - 21 W (amber) - Remove the cover by pulling the fl exible rubber tab. - Turn the bulb holder a quarter turn anticlockwise. - Remove the bulb by pressing it lightly while turning it anticlockwise. - Change the bulb. - Ensure that the cover is refi tted correctly over its entire periphery to guarantee sealing. 2.Side lightsType A, W 5 W - 5 W - Remove the cover by pulling the fl exible rubber tab. - Remove the bulb holder fi tted by pressure by pulling the connector. - Change the bulb. - Ensure that the cover is refi tted correctly over its entire periphery to guarantee sealing. FRONT LIGHTS 1.Dipped headlamps/Main beam headlampsType C, H4 - 55 W - Remove the centre cover by pulling the fl exible rubber tab. - Disconnect the electrical connector. - Release the retaining tab. - Change the bulb taking care to align the metal part with the grooves on the light. - Reposition the retaining tab. - Ensure that the cover is refi tted correctly over its entire periphery to guarantee sealing.
129TROUBLESHOOTING8 Changing a bulb 4.Fog lampsType C, H1 - 55 W - Remove the fog lamp by removing the bolt, which can be accessed via the hole provided for this purpose in the bumper, using a Torx© 30 screwdriver. - Remove the three mud guard fi xing clips, located below the bumper. - Move the mud guard upwards. - Unclip the fog lamp by squeezing the clip to release it. - Remove the fog lamp from the outside. - Turn the yellow cover a 1/4 turn to open. - Separate the clips which secure the base of bulb on each side to release the bulb. - Remove the bulb by pulling, keeping it straight. - Insert the new bulb, re-tighten the clips around the base of the bulb and carry out the operations in reverse order to put the light unit and the bumper back in position. SIDE REPEATER Type A, WY 5 W (amber) - Push the repeater towards the rear and disengage it by pulling the front. - Consult a PEUGEOT dealer to obtain a new repeater which is a fully moulded part. - To refi t, engage the repeater towards the rear and bring it towards the front. Front/Rear COURTESY LIGHTS Type A, 12 V 5 W - 5 W - Unclip the lens by sliding a screwdriver in the slots on each side of the courtesy light. - Pull the bulb and change it. - Clip the lens in its housing and ensure that it is secured correctly.
130 Changing a bulb For further information concerning the bulbs, refer to the "Types of bulb". 1.Brake lights/side lightsType B, P21/5 W - 21/5 W 2.Direction indicatorsType B, PY 21 W - 21 W (amber) 3.Reversing lightsType B, P21 W - 21 W 4.Fog lampsType B, P21 W - 21 W - Identify the faulty bulb then open the rear doors to 180°. Refer to the "Accesses" section of chapter 2. - Remove the two fi xing bolts using the screwdriver stored in the tool kit under the right-hand seat. - Pull the light unit from the outside. - Holding the light, disconnect the electrical connector. - Move aside the 4 tabs then extract the bulb holder. - Remove the faulty bulb by pressing it lightly while turning it anticlockwise. - Change the bulb. When removing the light unit: - with tailgate, pull the light unit towards the centre of the vehicle, - with hinged doors, pull the light unit towards you. When refi tting, take care to reposition the tabs and the supply wire correctly to avoid trapping the wire. After changing the rear direction indicator bulb, the reinitialisation time is more than approximately 2 minutes. REAR LIGHTS High pressure washing When using this type of washing on stubborn dirt, do not persist on the headlamps, the lights and their surround to avoid damaging their coating and their seal.
131TROUBLESHOOTING8 Changing a bulb NUMBER PLATE LIGHTS - Unscrew the two nuts. - Push the pins. - If necessary, disconnect the connector to remove the light. - Change the bulb. With tailgate - Move aside the plastic lens using a screwdriver. - Change the bulb. - Replace the plastic lens and press on it. THIRD BRAKE LIGHT Type A, W 16 W - 16 W With hinged doors - Unclip the interior trim. - Disconnect the connector by moving aside its tab. - Turn the bulb holder a quarter turn anticlockwise. - Change the bulb. - Put the bulb holder back in place and reconnect the connector. - Put the trim back in place. Type A, W 5 W - 5 W
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131