Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Partner 1996-2008 Owner's Manual Troubleshooting Battery

121 Battery TROUBLESHOOTING8 BATTERY Before disconnecting the battery, you must wait for 2 minutes after switching off the ignition. Never disconnect a terminal when the engine is running. Never charge a battery without fi rst disconnecting the terminals. After every reconnection of the battery, switch on the ignition and wait 1 minute before starting to allow the electronic systems to be initialised. If slight diffi culties are experienced after this, please contact a PEUGEOT dealer. After changing bulbs, wait approximately 3 minutes before reconnecting the battery. It is advisable to disconnect the battery if the vehicle is not to be used for a period of more than one month. ECONOMY MODE To charge the battery using a battery charger - Disconnect the battery, - Follow the instructions for use given by the battery charger manufacturer, - Reconnect starting with the negative (-) terminal, - Check that the terminals and connectors are clean. If they are covered with sulphate (white or greenish deposit), disconnect them and clean them. To start the vehicle from another battery - Connect the red cable to the positive (+) terminals of the two batteries, - Connect one end of the green or black cable to the negative (-) terminal of the slave battery, - Connect the other end of the green or black cable to an earth point on the broken down vehicle as far as possible from the battery, - Operate the starter, let the engine run, - Wait for the engine to return to idle, then disconnect the cables. After the engine has stopped, with the key in the ignition position, certain functions (windscreen wiper, electric windows, courtesy lights, audio equipment, etc.) can only be used for a cumulative duration of thirty minutes, to prevent discharging of the battery. Once the thirty minutes are over, the active functions are put on standby and the battery warning light fl ashes accompanied by a message on the display. To resume the use of these functions immediately, start the engine and let it run for a few minutes. The time available will then be double the time for which the engine was left running. However, this time will always be between fi ve and thirty minutes. A fl at battery will prevent the engine from starting.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131