Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Partner 1996-2008 Owner's Manual Starting and stopping

Starting and stopping Good practice when stopping Good practice when starting Diesel pre-heating warning light If the temperature is high enough, the warning light comes on for less than one second, you can start without waiting. In cold weather, wait for this warning light to switch off then operate the starter (Starting position) until the engine starts. Door or bonnet open warning light If this comes on, a door or the bonnet is not closed correctly, check! Minimise engine and gearbox wear When switching off the ignition, let the engine run for a few seconds to allow the turbocharger (Diesel engine) to return to idle. Do not press the accelerator when switching off the ignition. There is no need to engage a gear after parking the vehicle. STARTING AND STOPPING Running and accessories position. To unlock the steering, turn the steering wheel gently while turning the key, without forcing. In this position, certain accessories can be used. Starting position. The starter is operated, the engine turns over, release the key. STOP position: steering lock. The ignition is off. Turn the steering wheel until the steering locks. Remove the key.
39READY TO SET OFF 3922 Starting and stopping HILL START ASSISTANCE Operation With the brake pedal and clutch pedal pressed, from the time you release the brake pedal you have approximately 2 seconds before the vehicle starts to roll back and without using the handbrake within which to move off. During the moving off phase, the function is deactivated automatically, gradually releasing the braking pressure. During this phase, the typical noise of mechanical disengaging of the brakes can be heard, indicating the imminent movement of the vehicle. Anomaly The hill start assistance is deactivated in the following situations: - when the clutch pedal is released, - when the handbrake is applied, - when the engine is switched off, - when the engine stalls. If a malfunction of the system occurs, this warning light comes on accompanied by an audible signal and confi rmed by a message on the display. Contact a PEUGEOT dealer to have the system checked. This function, linked with the ESP, makes hill starts easier and is activated in the following conditions: - the vehicle must be stationary, engine running, foot on the brake, - the gradient of the road must be steeper than 5 %, - uphill, the gearbox must be in neutral or in a gear other than reverse, - downhill, reverse gear must be engaged.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131