Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Partner 1996-2008 Owner's Manual Seats

57ERGONOMICS and COMFORT33 Seats FRONT SEATS Depending on the version and confi guration of your vehicle, different front seats are fi tted, either: - a driver’s seat and a passenger seat, - an individual driver’s seat and a modular bench. Depending on the models, the following adjustments are available: 1 - Forwards/backwards adjustment Lift the bar and slide the seat forwards or backwards. 3 - Driver’s seat height adjustment To raise the seat, pull the handle upwards then take your weight off the seat cushion. To lower the seat, pull the handle upwards then push on the seat cushion. 2 - Seat back angle adjustment With your back pressed against the seat back, move the lever forward and set the required angle.
58 Seats Never drive with the head restraints removed; they must be in place and correctly adjusted. Armrest To access the vertical position, raise the armrest until it locks. Lower the armrest to put it back in the position for use. To remove the armrest, press the release button from the vertical position and move aside the armrest. To put the armrest back in place, clip it in the vertical position. If the vehicle is fi tted with the additional console and an armrest, to fold the passenger seat to the table position remove the console or the armrest. PASSENGER SEAT The back of the individual passenger seat can be folded to form a writing table. This position also permits the transportation of long loads. Head restraint height adjustment To raise the head restraint, slide it vertically upwards. To lower the head restraint, press the button and slide the head restraint vertically downwards. The adjustment is correct when the upper edge of the head restraint is level with the top of the head. To remove the head restraint, press the button and pull the head restraint upwards. To re-install, engage the head restraint rods in the holes, making sure they are aligned with the seat back. Folding the seat back Pull the lever forwards then tilt the seat back. Returning the seat back to its original position Pull the lever forwards then raise the seat back until it locks.
58 Seats Never drive with the head restraints removed; they must be in place and correctly adjusted. Armrest To access the vertical position, raise the armrest until it locks. Lower the armrest to put it back in the position for use. To remove the armrest, press the release button from the vertical position and move aside the armrest. To put the armrest back in place, clip it in the vertical position. If the vehicle is fi tted with the additional console and an armrest, to fold the passenger seat to the table position remove the console or the armrest. PASSENGER SEAT The back of the individual passenger seat can be folded to form a writing table. This position also permits the transportation of long loads. Head restraint height adjustment To raise the head restraint, slide it vertically upwards. To lower the head restraint, press the button and slide the head restraint vertically downwards. The adjustment is correct when the upper edge of the head restraint is level with the top of the head. To remove the head restraint, press the button and pull the head restraint upwards. To re-install, engage the head restraint rods in the holes, making sure they are aligned with the seat back. Folding the seat back Pull the lever forwards then tilt the seat back. Returning the seat back to its original position Pull the lever forwards then raise the seat back until it locks.
59ERGONOMICS and COMFORT33 Seats Storage compartment under the seat cushion Raise the centre seat cushion to gain access to the storage compartment. This space can be made secure by fi tting a padlock (not supplied). MULTI-FLEX BENCH SEAT Centre seat This is fi tted with a 3-point seat belt with the seat belt return fi xed on the load retaining ladder behind the driver. Mobile offi ce position Pull the tab located on the lower edge of the seat to lower the seat back incorporating a writing table equipped with a strap. To return the seat back to the upright position, pull the tab and guide the seat back until it locks. During the operations, take care not to trap the tab under the seat cushion. Before locking the seat in the sitting position, always take care to leave the seat belt buckles visible and the associated straps available for the passengers.
60 Seats Foldaway position Raise the yellow lever located at the base of the seat to release and raise the entire seat to the foldaway position (seat cushion raised against the seat back) until it locks. This position permits the transportation of high loads in the cab part. To return the seat to the sitting position, push the yellow lever located under the seat cushion and lower the entire seat until it is upright and locked on the fl oor in the seat position. Side seat The back of the side seat is fi tted with a metal shell. Retracted position Pull the tab located on the upper edge of the seat by the head restraint to tilt and guide the entire seat. It inserts itself into the fl oor in the front seat position and so forms a continuous fl at fl oor with the load space. This position permits the transportation of long loads inside the vehicle, up to 3 m (3.25 m in the case of the long versions) with the doors closed. In the retracted position, the maximum weight on the seat back is 50 Kg. To return the seat to the sitting position, raise the seat back until it locks on the fl oor in the seat position.
61ERGONOMICS and COMFORT33 Seats CONFIGURATIONS Examples of various layouts combining comfort and practicality The various operations must be carried out while stationary.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131