Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Partner 1996-2008 Owner's Manual Practical information Interior rack

70 Practical information The two interior bars are covered with rubber and incorporate a strap passage to secure the loaded objects. The interior rack consists of two bars to be installed at the top of the space leaving the lower area of the passenger compartment free. It permits the transportation of long loads (2 metres maximum) with the doors or tailgate closed. The long load must rest on the overhead storage compartment and the two bars. However, be sure to comply with the loads and weights permitted. Maximum load: 10 kilogrammes per bar.
71ERGONOMICS and COMFORT33 Practical information Fitting the bars - Unscrew the knurled wheels located at the ends of the bars fully. - Take hold of the bar by the ends to slide them towards the inside to retract them. - Extract the metal end piece A taking hold of the end of the bar like a syringe. - Insert the end piece A on one side then lower it to fi x it in the base of the notch B . Storing When the bars are not in use: - partially loosen the knurled wheels, - lift the bar slightly, - pivot it upwards by 180°, - tighten the knurled wheels. Good practice In the event of a front impact, the rack is disengaged to avoid injury to the occupants of the vehicle. The slight clearance observed in the bar is linked with this safety disengagement. Do not loosen or place the bars in a position other than those described above. The load on the rack must rest on the overhead storage compartment and be strapped using the strap passages provided on the bars. The bars are not grab handles for the passengers. - Carry out the same operations on the other side. - Ensure that they are engaged correctly at the base of the notch. - Tighten the knurled wheels and check the tightening by pushing the bar sideways. To remove, proceed in the reverse order.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131