Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Partner 1996-2008 Owner's Manual Practical information Crew cab

66 Practical information Bench seat The crew cab consists of a 3-seat bench, located in row 2, the one-piece back of which is solid with the "load retainer" grille. Access to the rear seats is via the sliding side door. Head restraints and seat belts The three seats are equipped with inertia reel seat belts. The seat belts of the side seats are solid with the panels, whereas the seat belt of the centre seat is solid with the back of the bench seat. Each seat has a head restraint bolted onto the load retaining grille and which can be removed. Do not store a head restraint inside the vehicle unless it is stowed or fi xed to a support. Do not drive with rear passengers without fi rst bolting the head restraints in place. Placing the bench seat in the fully folded position - If necessary, move the front seats forward and fasten the strap of the seat belt of the centre seat. - Check that the seat belt straps and buckles are positioned correctly along the side panels, to ensure that the sliding of the seat back is not hindered. - Release the seat back using the control A .
67ERGONOMICS and COMFORT33 Practical information Putting the bench seat back in the seat position - In a single movement: take hold of the red strap and pull the assembly horizontally towards the rear. Guide the movement until the feet of the bench seat lock on the fl oor. - Raise the seat back. The control A locks automatically. - Check that the bench is locked on the fl oor correctly once it has been returned to the seat position. Do not let the assembly fall sharply. Good practice There is no need to assist, guide or support using the arm which remains free during the tilting movement. The rear seat belt casings are not designed for securing the load transported. Use the stowing rings on the fl oor only. The bench seat of the crew cab is not suitable for the installation of a child seat. - Using the same hand, fold the seat back and the associated grille onto the seat cushion. - Take hold of the red strap (like a handle) and lift and assembly vertically, guiding the movement to the fully folded position. The raised seat rests against the backs of the seats of row 1.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131