Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Partner 1996-2008 Owner's Manual Practical information

62 Practical information 1. Lower glove box An auxiliary socket is located in the glove box (cable not supplied) for the connection of portable equipment (MP3 player, ...). Upper storage compartment This is located on the fascia, behind the steering wheel. A recess makes lifting of the lid easier when opening. Guide it to its rest position. To close, guide the lid then press the centre gently. Any liquid which could spill risks causing an electrical short circuit and therefore a potential fi re. 3. Side storage compartment 4. Bag hook Only hang fl exible bags which are not too heavy on this hook. 2. Storage tray and bottle holder (1.5 L)
63ERGONOMICS and COMFORT33 Practical information Overhead storage unit This is located above the sun visors and can accommodate various objects (a jumper, fi le, gloves...). The openings concealed by the sun visors allow you to see and access the objects stored in the overhead storage unit. The maximum weight permitted in the overhead storage unit is 5 Kg. Do not place objects in this storage unit which could present a risk to the occupants. Central storage console This console offers an appreciable additional storage area: it can be removed and clips onto a base which also incorporates two cup holders at the rear. Ensure that the object (bottle, can...) placed in the cup holder is retained securely and does not risk being dislodged while driving. Any liquid which could spill presents a risk of damage on contact with the instrument panel and centre console controls. Take care. Sun visor To prevent dazzle from ahead, fold the sun visor down. A pocket is provided in the driver’s sun visor for storing toll cards, tickets, ... Storage compartments under seats Storage compartments may be provided in the fl oor under the front seats. The tool kit and the jack are stored under the right-hand seat. Move the seat forward for easier access to the storage compartment.
64 Practical information Automatic switching on/off The front courtesy light comes on when the key is removed from the ignition, when the vehicle is unlocked, when one of the front doors is opened and for location of the vehicle using the remote control. It switches off gradually after the ignition is switched on and when the vehicle is locked. Cab: comes on when one of the front doors is opened. These are switched on and off by means of a manual switch, with the ignition on. Load space: comes on when one of the rear doors is opened. If the doors remain open for a few minutes, the courtesy lights are switched off. Permanently off. Permanently on, ignition on. Front courtesy light COURTESY LIGHTS Rear courtesy light Front individual reading lights
6533 Practical information TORCH A removable torch, incorporated in the wall of the boot, carries out two functions: - boot light, - torch. The boot light operates automatically when the boot is opened. The torch operates with NiMH type storage batteries. Observe the polarities when fi tting these storage batteries. Using the torch Remove it from its location by pulling from the top. Press the switch, located on the back of the torch, to switch it on or off. The retaining clip allows you to position the torch for precise use (for example, lighting while changing a wheel). Storing the torch Always put the torch back starting by positioning the lower part in its location. If it is not engaged correctly it may not charge and may not come on when the boot is opened. Putting the torch back in place switches it off automatically if it has not been switched off already. The torch has a maximum operating time of 45 minutes and charges within a few hours while driving. Never replace the storage batteries with conventional batteries.
66 Practical information Bench seat The crew cab consists of a 3-seat bench, located in row 2, the one-piece back of which is solid with the "load retainer" grille. Access to the rear seats is via the sliding side door. Head restraints and seat belts The three seats are equipped with inertia reel seat belts. The seat belts of the side seats are solid with the panels, whereas the seat belt of the centre seat is solid with the back of the bench seat. Each seat has a head restraint bolted onto the load retaining grille and which can be removed. Do not store a head restraint inside the vehicle unless it is stowed or fi xed to a support. Do not drive with rear passengers without fi rst bolting the head restraints in place. Placing the bench seat in the fully folded position - If necessary, move the front seats forward and fasten the strap of the seat belt of the centre seat. - Check that the seat belt straps and buckles are positioned correctly along the side panels, to ensure that the sliding of the seat back is not hindered. - Release the seat back using the control A .
67ERGONOMICS and COMFORT33 Practical information Putting the bench seat back in the seat position - In a single movement: take hold of the red strap and pull the assembly horizontally towards the rear. Guide the movement until the feet of the bench seat lock on the fl oor. - Raise the seat back. The control A locks automatically. - Check that the bench is locked on the fl oor correctly once it has been returned to the seat position. Do not let the assembly fall sharply. Good practice There is no need to assist, guide or support using the arm which remains free during the tilting movement. The rear seat belt casings are not designed for securing the load transported. Use the stowing rings on the fl oor only. The bench seat of the crew cab is not suitable for the installation of a child seat. - Using the same hand, fold the seat back and the associated grille onto the seat cushion. - Take hold of the red strap (like a handle) and lift and assembly vertically, guiding the movement to the fully folded position. The raised seat rests against the backs of the seats of row 1.
68 Practical information LOAD SPACE LAYOUT 12 volt socket Associated with the torch, it is advisable to limit its use to avoid discharging the battery. Maximum power: 120 W. Stowing rings Use the stowing rings on the rear fl oor to secure your loads. As a safety precaution in case of sharp braking, you are advised to immobilise the load by securing it fi rmly using the stowing rings and place heavy objects as far forwards as possible (towards the cab). Trims The lower parts of the sides are fi tted with load protection trims.
69ERGONOMICS and COMFORT33 Practical information Ladder Partition with fl ap Mid-height partition Load retainers Your vehicle can be equipped with a wide range of load retainers to effectively protect the driver and front passenger(s), while maintaining the loading adaptability. Removable flap The fl ap located on the panel section of the mid-height partition, behind the passenger seat(s), can be removed to permit the loading of long objects. - Turn the control located at the top of the fl ap to release it. - Lift the fl ap to remove it from its location. - Pivot the fl ap by 90° to the right. - Store it behind the driver’s seat, clipping it into the securing lugs. Contact a PEUGEOT dealer for information about the different accessory load retainer models.
68 Practical information LOAD SPACE LAYOUT 12 volt socket Associated with the torch, it is advisable to limit its use to avoid discharging the battery. Maximum power: 120 W. Stowing rings Use the stowing rings on the rear fl oor to secure your loads. As a safety precaution in case of sharp braking, you are advised to immobilise the load by securing it fi rmly using the stowing rings and place heavy objects as far forwards as possible (towards the cab). Trims The lower parts of the sides are fi tted with load protection trims.
70 Practical information The two interior bars are covered with rubber and incorporate a strap passage to secure the loaded objects. The interior rack consists of two bars to be installed at the top of the space leaving the lower area of the passenger compartment free. It permits the transportation of long loads (2 metres maximum) with the doors or tailgate closed. The long load must rest on the overhead storage compartment and the two bars. However, be sure to comply with the loads and weights permitted. Maximum load: 10 kilogrammes per bar.
71ERGONOMICS and COMFORT33 Practical information Fitting the bars - Unscrew the knurled wheels located at the ends of the bars fully. - Take hold of the bar by the ends to slide them towards the inside to retract them. - Extract the metal end piece A taking hold of the end of the bar like a syringe. - Insert the end piece A on one side then lower it to fi x it in the base of the notch B . Storing When the bars are not in use: - partially loosen the knurled wheels, - lift the bar slightly, - pivot it upwards by 180°, - tighten the knurled wheels. Good practice In the event of a front impact, the rack is disengaged to avoid injury to the occupants of the vehicle. The slight clearance observed in the bar is linked with this safety disengagement. Do not loosen or place the bars in a position other than those described above. The load on the rack must rest on the overhead storage compartment and be strapped using the strap passages provided on the bars. The bars are not grab handles for the passengers. - Carry out the same operations on the other side. - Ensure that they are engaged correctly at the base of the notch. - Tighten the knurled wheels and check the tightening by pushing the bar sideways. To remove, proceed in the reverse order.
72 Practical information ROOF BARS If you install transverse bars on these bars, refer to the weight values indicated by the manufacturer but do not exceed 75 Kg.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131