Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Partner 1996-2008 Owner's Manual Accesses Remote control / Keys

15 Accesses READY TO SET OFF2 KEY This locks and unlocks the locks on the vehicle and starts the engine. ACCESSES Security of use REMOTE CONTROL Unlocking Unlocking the load space Central locking Press this button to lock the vehicle completely. The direction indicators fl ash once. If one of the doors is open (transportation of long loads) or is not closed correctly, the central locking will not work. Deadlocking A second press on the closed padlock on the remote control within fi ve seconds after locking changes the locking to deadlocking. This is confi rmed by fi xed lighting of the direction indicators for approximately two seconds. Deadlocking renders the exterior and interior door opening handles inoperative: do not leave anyone inside the vehicle when it is deadlocked. If deadlocking is activated from inside the vehicle using the remote control, it will change to normal locking when the vehicle is started. To unlock the load space only: Press this control to unlock the load space, the front doors alone remain locked. Press this control to lock the vehicle completely. Press this button to unlock all of the rear doors. Press this button once to unlock the front doors. Press this button again to unlock your vehicle completely. The direction indicators fl ash twice.
16 Accesses Good practice Take care not to allow the remote control to come into contact with grease, dust, rain or a damp environment. A heavy object attached to the key (keyring, ...) weighing on the shaft of the key in the switch, may cause a malfunction. REMOTE CONTROL Programming the remote control Following changing of the remote control battery or disconnection of the vehicle battery, the remote control may have to be reprogrammed. Wait at least one minute before using the remote control. Insert the key in the ignition switch with the buttons (padlocks) of the remote control facing you. Switch on the ignition. Press the locking padlock for at least fi ve seconds within the next ten seconds. Switch off the ignition. Wait at least one minute before using the remote control. The remote control is now working again. Use only identical batteries or batteries of an equivalent type to those recommended by PEUGEOT dealers. Do not discard the remote control batteries, they contain metals which are harmful to the environment. Deposit them at a PEUGEOT dealership, or at any other approved collection point. Folding/unfolding the key Changing the battery Battery ref.: CR1620/3 volts. The information "battery fl at" is given by an audible signal, accompanied by a message on the display. To replace the battery, unclip the casing using a coin at the ring. If the remote control does not work after the battery has been changed, re-programme the remote control. There is a risk of damage if the replacement battery does not conform. Press this button to release the key from its housing. To fold the key, press this chromed button then fold the key into the housing. If you do not press the button, the mechanism may be damaged.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131