Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Boxer 2006-2014 Owner's Manual Technology on Board Parking sensors & Reversing camera

Parking sensors 914TECHNOLOGY on BOARD AUDIBLE REAR PARKING SENSORS If fitted on your vehicle, the system consists of four proximity sensors, installed in the rear bumper. They detect any obstacle: person, vehicle, tree, fence, behind the vehicle during the manoeuvre. However, objects the size or thickness of which are detected at the beginning of the manoeuvre will no longer be detected at the end of the manoeuvre: blind spots between and below the sensors. Examples: stake, roadworks cone or pavement post. The rear parking sensor system may be coupled with a reversing camera. Operation Engage reverse gear with the gear lever. The proximity information is indicated by an audible signal of increasing frequency as the vehicle approaches the obstacle. When the distance between the rear of the vehicle and the obstacle is less than approximately thirty centimetres, the audible signal becomes continuous. The system cannot, in any circumstances, take the place of the vigilance and responsibility of the driver. Switching off Come our of reverse gear into neutral. Operating fault If this warning lamp comes on in the instrument panel accompanied by a message in the screen, contact a PEUGEOT dealer or a qualified workshop. Good practice In bad weather or in winter, ensure that the sensors are not covered with mud, ice or snow.
Parking sensors 92 REVERSING CAMERA If your vehicle is fitted with this camera, it is located at the rear, next to the third brake lamp. It sends views to the screen installed in the cab. This rear vision is an aid to manoeuvring. The reversing camera may be coupled with rear parking sensors. Screen The camera sends the images to a 5 inch LCD colour screen. This screen is also the one used by the touch screen audio-telematic system. Activation and deactivation of the system is done in the settings menu of the touch screen audio-telematic system. Operation The camera comes into operation when reverse gear is engaged and remains active up to approximately 9 mph (15 km/h). It is deactivated above 11 mph (18 km/h). The camera also comes on, with the vehicle stationary, when the rear doors are opened. Switching off When a forward gear is engaged, the last image remains displayed for approximately 5 seconds then switches off. In the same way, the last image also remains displayed, with the vehicle stationary, when the rear doors are closed. Good practice With optimum vehicle conditions (position on the road, loading level) the maximum area of visibility covered by the camera has a field depth approximately 3 m long and 5.5 m wide. The area of visibility may vary depending on the external weather conditions (brightness, rain, snow, fog, ...), the load in the vehicle and the position of the vehicle on the road. When cleaning the camera and the screen, avoid using a detergent or a tool which may scratch the glass. Use a non-abrasive cloth or a small brush.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131