Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Boxer 2006-2014 Owner's Manual Ready to Set Off Starting and stopping (Hill start, Stop & Start)

Starting and stopping 38 IGNITION SWITCH STOP position: steering lock. The ignition is off. MAR position: ignition on. Certain accessories can be used. AVV position: starter. The starter is operated. Starting the engine Engine immobiliser warning lamp If this warning lamp comes on, use another key and have the faulty key checked by a PEUGEOT dealer. Diesel pre-heating warning lamp With the parking brake applied and the gearbox in neutral, turn the key to the MAR position. Wait for this warning lamp to go off then operate the starter ( AVV position) until the engine starts. The period of illumination of the warning lamp depends on the climatic conditions. Door or bonnet open warning lamp If this warning lamp comes on, check that the doors and bonnet are closed correctly. Stopping the engine Stop the vehicle and apply the parking brake, then, with the engine at idle, return the key to the STOP position. In low temperatures In mountainous and/or cold areas, it is advisable to use a "winter" type fuel suited to low or minus temperatures. A heavy object (key fob...), attached to the key and weighing down on its shaft in the ignition switch, could cause a malfunction. With the engine hot, the warning lamp comes on for a few moments, you can start the engine without waiting. As soon as the engine is running, release the key.
Starting and stopping 392READY TO SET OFF HILL START ASSIST This system (also called HHC - Hill Holder Control), linked to the dynamic stability control system, makes hill starts easier and is activated in the following conditions: - the vehicle must be stationary, engine running, foot on the brake, - the gradient of the road must be steeper than 5%, - uphill, the gearbox must be in neutral or in a gear other than reverse, - downhill, reverse gear must be engaged. The Hill Start Assist function is a driving aid system. It is not an automatic vehicle parking function or an automatic parking brake. Operation With the brake pedal and clutch pedal pressed, from the time you release the brake pedal you have approximately 2 seconds before the vehicle starts to roll back and without using the parking brake within which to move off. During the moving off phase, the function is deactivated automatically, gradually releasing the braking pressure. During this phase, the characteristic noise of mechanical release of the brakes may be heard, indicating the imminent movement of the vehicle. Operating fault If a malfunction of the system occurs, this warning lamp comes on accompanied by an audible signal and confi rmed by a message in the screen. Have the system checked by at a PEUGEOT dealer or a qualifi ed workshop. Hill start assist is deactivated in the following situations: - when the clutch pedal is released, - when the parking brake is applied, - when the engine is switched off, - when the engine stalls.
Starting and stopping 40 The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The engine restarts automatically - START mode - as soon as you want to move off. The restart takes place instantly, quickly and silently. Perfect for urban use, the Stop & Start system reduces fuel consumption and exhaust emissions and offers the comfort of complete silence when stationary. STOP & START Operation Going into engine STOP mode With the vehicle stationary, put the gear lever into neutral, then release the clutch pedal. - The "S" warning lamp comes on in the instrument panel and the engine goes into standby. Automatic stopping of the engine is only possible after the vehicle has exceed a speed of about 6 mph (10 km/h), to avoid repeated stopping of the engine when driving slowly. Never leave your vehicle with out first turning off the ignition with the key. Never refuel with the engine in STOP mode; you must switch off the ignition with the key. Special cases: STOP mode unavailable The STOP mode is not invoked when: - the system is initialising, - the driver's door is open, - the driver's seat belt is not fastened, - the air conditioning is running, - the heated rear screen is on, - the windscreen wiper is on fast wipe, - reverse gear is engaged, for a parking manoeuvre, - some special conditions (battery charge, engine temperature, particle filter regeneration, braking assistance, ambient temperature...) where the engine is needed to assure control of a system. The "S" warning lamp flashes for a few seconds, then goes off. This operation is perfectly normal.
Starting and stopping 412READY TO SET OFF Going into engine START mode - The "S" warning lamp goes off and the engine restarts. If following an automatic restart in START mode, the driver takes no action on the the vehicle during the next 3 minutes, the system stops the engine definitively. The engine can then only be restarted using the key. Special cases: START invoked automatically The START mode is invoked automatically when: - the vehicle's is free wheeling on a slope, - the windscreen wiper is on fast wipe, - the air conditioning is running, - the engine has been stopped for around 3 minutes with Stop & Start, - some special conditions (battery charge, engine temperature, braking assistance, ambient temperature...) where the engine is needed to assure control of a system. In this case, a message appears in the instrument panel screen, accompanied by the "S" warning lamp, which flashes for a few seconds, then goes off. Good practice With a manual gearbox in STOP mode, if a gear is engaged without fully depressing the clutch pedal, restarting may not take place. A warning lamp or message is displayed in the instrument panel asking you to fully depress the clutch pedal to allow restarting. With the engine stopped in STOP mode, if the driver unfasten's their seat belt and opens a front door, the engine can only be restarted using the ignition key. There is an audible signal, accompanied by flashing of the "S" warning lamp and, depending on equipment, a message is displayed. This operation is perfectly normal. With the vehicle in gear, automatic engine restarting is only allowed by fully depressing the clutch pedal.
Starting and stopping 42 Deactivation At any time, press the "A - OFF" switch to deactivate the system. Illumination of the switch warning lamp, accompanied by a message in the instrument panel screen, confi rms the the instruction has been registered. If the system has been deactivated in STOP mode, the engine restarts immediately. It is necessary to deactivate the Stop & Start system if you want to allow continuous operation of the air conditioning. The switch warning lamp stays on. Reactivation Press the "A - OFF" switch again. The system is active again; the switch warning lamp going off and a message in the instrument panel screen confirm reactivation. Operating fault In the event of a fault with the system, the Stop & Start system is deactivated and this warning lamp comes on, accompanied by a message in the instrument panel screen . Have it checked by a PEUGEOT dealer or a qualified workshop. In the event of an operating fault with STOP mode, it is possible to restart the engine by depressing the clutch pedal fully and putting the gear lever into neutral. Maintenance Before working under the bonnet, you must switch off the ignition with the key to avoid any risk of injury resulting from automatic operation of START mode. This system requires a specific battery with a special specification and technology (reference numbers available from a PEUGEOT dealer or a qualified workshop). Fitting a battery not listed by PEUGEOT introduces the risk of malfunction of the system. The Stop & Start system makes use of advanced technology. Specialist knowledge is needed for any work on the system, which can only be assured by PEUGEOT dealers. Refer to the "Quick help - Flat battery" section.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131