Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Boxer 2006-2014 Owner's Manual Quick Help Puncture / Changing a wheel

Puncture 145QUICK HELP 8 Parking the vehicle As far as possible, park the vehicle on level, stable and non-slippery ground. Apply the parking brake, switch off the ignition and engage first gear. Put on a high visibility vest and position the warning triangle on the road. Tools These are located in a box under the front passenger seat cushion. - Turn the button a quarter of a turn then pull the box. - After use, press the button then turn it a quarter of a turn to secure the box. A. Long socket. B. Ratchet wrench. C. Jack. D. Removable towing eye. E. Wheelbrace. F. Screwdriver. CHANGING A WHEEL You must ensure that the occupants get out of the vehicle and wait in a safe location. If possible, place a chock under the wheel diagonally opposite the wheel to be changed. The jack and the tool kit are specific to your vehicle. Do not use them for other purposes. Never go underneath a vehicle supported only by a jack (use an axle stand).
Puncture 146 Removing the wheel to be repaired - Remove the trim using the screwdriver Fas a lever. - Release the bolts using the wheelbrace E . - Position the jack C at one of the four locations provided on the underbody near the wheels. Spare wheel The spare wheel retaining bolt is located below the bumper on the right. - Turn the bolt using the long socket Aand the ratchet wrench B to release the wheel. - Turn to the locking point, indicated by an increase in the force required for the manoeuvre. - Take out the spare wheel using the wrench. - Unscrew the handle G and remove the support H . - Release the spare wheel and place it near the wheel to be changed.
Puncture 147QUICK HELP 8 Refitting the repaired wheel Refitting the repaired wheel is the same as fitting the spare wheel; don't forget to refit the wheel trim. Refer to the "Technical data - Identification markings" section for the location of the tyre pressure label. The spare wheel is not designed to be used over long distances. Have the tightening of the bolts and pressure of the spare wheel checked by a PEUGEOT dealer or a qualified workshop without delay. Also, have the original wheel repaired and refitted by a PEUGEOT dealer or a qualified workshop as soon as possible. Fitting the spare wheel - Put the spare wheel in place on the hub and start screwing in the bolts by hand. - Carry out an initial tightening of the bolts using the wheelbrace E . - Lower the vehicle completely by folding the jack, then remove the jack. - Tighten the bolts again using the wheelbrace E , tighten them fully without forcing them. - Stow the wheel to be repaired at the rear of the vehicle. - Hook the support H and screw in the handle G . - Insert the long socket A in the hole then wind the bolt fully, using the ratchet wrench B , to raise the wheel. - Stow the tools and the trim. If you have a retractable foot board, the jack must be positioned at 45°. - Extend the jack using the ratchet wrench B until the wheel is a few centimetres off the ground. - Unscrew the bolts fully and remove the wheel to be repaired.
Puncture 148 PUNCTURE REPAIR KIT Repairing the tyre - Apply the parking brake. Unscrew the tyre valve cap, remove the filling hose Band screw the ring E onto the valve, - start the engine, - insert the connector G into the nearest power socket on the vehicle, - switch on the compressor by placing the switch F in position I (on), - inflate the tyre to a pressure of 4 bars. To obtain a more accurate reading, you are advised to check the pressure value on the pressure gauge H , with the compressor off. - check that the switch F on the compressor is in position 0 (off), This temporary puncture repair kit is located at the front of the passenger compartment. It consists of: - a cartridge A , containing the sealant fluid, equipped with: ● a filling hose B , ● a sticker C indicating "max. 80 km/h", which the driver must affix in full view (on the dashboard) after repairing the tyre, - a quick guide to use of the repair kit, - a compressor D equipped with a pressure gauge and unions, - adaptors, for the inflation of various items.
Puncture 149QUICK HELP 8 - If a pressure of at least 3 bars is not reached within 5 minutes, disconnect the compressor from the valve and the power socket, then move the vehicle forward by approximately 10 metres to distribute the sealant fluid inside the tyre. - Then repeat the inflating operation: ● if a pressure of at least 3 bars is not reached within 10 minutes, switch off your vehicle: the tyre has suffered too much damage and repair has not been possible.Contact a PEUGEOT dealer or a qualified workshop. ● if the tyre has been inflated to a pressure of 4 bars , set off again immediately. After driving for approximately 10 minutes, stop and check the pressure of the tyre again. Adjust the pressure if necessary and contact a PEUGEOT dealer or a qualified workshop as soon as possible. Checking and adjusting the pressure The compressor can only be used to check and adjust the pressure. - Disconnect the hose I and connect it to the tyre valve directly; the cartridge will then be connected to the compressor and the filling fluid will not be injected. If it is necessary to deflate the tyre, connect the hose I to the tyre valve and press the yellow button, placed in the centre of the switch on the compressor. Replacing the cartridge To replace the sealant cartridge, carry out the following operations: - disconnect the hose I , - turn the cartridge to be replaced anticlockwise and lift it, - insert the new cartridge and turn it clockwise, - reconnect the hose I and connect the hose B in its location. The cartridge contains ethylene-glycol, a product which is harmful if swallowed and which causes irritation to the eyes. Keep out of reach of children. After use, do not discard the cartridge in the environment, take it to a PEUGEOT dealer or an appropriate waste disposal organisation. This puncture repair kit and replacement cartridges are available from PEUGEOT dealers.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131