Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Boxer 2006-2014 Owner's Manual Quick Help Bulbs and Lamps

Failed bulb or lamp 138 When using a high pressure washer on stubborn dirt, do not persist on the headlamps, the lamps and their edges to avoid damaging their lacquer finish and seals. CHANGING A BULB Types of bulb and lamp Various types of bulb and lamp are used on your vehicle. To remove them: Type A Entirely glass bulb: pull gently as it is fitted by pressure.Type B Bayonet bulb: press on the bulb then turn it anticlockwise.Type C Cylindrical bulb: move aside the contacts. For removing and refitting the screws, use the screwdriver stowed in the tool box under the front passenger's seat. Carry out the operations in reverse order to refit each bulb. Type D - E Halogen bulb: release the retaining spring from its housing. Always replace a failed bulb or lamp with a new bulb or lamp of the same type and specification.
Failed bulb or lamp 139QUICK HELP 8 1 - Main beam headlamps Type D , H7 - 55 W - Remove the cover by pulling on the rubber tongue. - Disconnect the electrical connector. - Release the retaining spring by pressing on the central clip. - Change the bulb taking care to align the metal part with the groove on the lamp. 2 - Dipped beam headlamps Type D , H7 - 55 W - Remove the cover by pulling on the rubber tongue. - Disconnect the electrical connector. - Release the retaining spring by pressing on the central clip. - Change the bulb taking care to align the metal part with the grooves on the lamp. Front lamps Open the bonnet. To access the bulbs, reach behind the headlamp unit. If necessary you can remove the headlamp: - Disconnect the electrical connector by removing its locking ring. - Remove the two headlamp fixing screws. - Move the headlamp towards the centre of the vehicle to extract it from its sliders. On the left hand side, take care not to dislodge the bonnet stay. 3 - Direction indicators Type A , WY 21 W - 21 W - Remove the cover by pulling on the rubber tongue. - Turn the bulb holder a quarter turn anticlockwise. - Change the bulb.
Failed bulb or lamp 140 Halogen bulbs must be changed after the headlamp has been off for several minutes (risk of serious burns). Do not touch the bulb directly with your fingers, use lint-free cloths. When each operation has been completed, check the operation of the lamps. 5 - Foglamps Type E , H1 - 55 W - Turn the steering fully to the left. - Remove the screw located in the wheel arch then open the flap. - Remove the cover. - Disconnect the electrical connector. - Release the retaining spring by pressing on the two clips. - Change the bulb taking care to align the metal part with the grooves on the lamp. LED daytime running lamps These light-emitting diode (LED) lamps serve as both daytime running lamps and sidelamps. If your vehicle is fitted with LED daytime running lamps, contact a PEUGEOT dealer. 4 - Sidelamps / daytime running lamps Type A , W21/5W - 21W and 5W - Remove the cover by pulling on the rubber tongue. - Turn the bulb holder a quarter of a turn anti-clockwise. - Change the bulb.
Failed bulb or lamp 141QUICK HELP 8 Courtesy lamps Type C , 12 V 10 W - 10 W - Press the points, indicated by the arrows, then remove the courtesy lamp. - Open the protective flap. - Change the bulb moving aside the two contacts. - Ensure that the new bulbs are secured correctly between the two contacts. - Close the protective flap. - Fix the courtesy lamp in its housing and ensure that it is secured correctly. Side marker lamps Type A, W5W - 5W - If your vehicle is fitted with these lamps (van type L4), remove the two fixing screws. - Pull the bulb holder to release it from the lugs. - Pull the bulb out and change it. Direction indicator side repeaters Type A , W 16 W F - 16 W - Move the mirror glass to access the screws. - Remove the two fixing screws. - Pull the bulb holder to release it from the dog points. - Pull the bulb out and change it. Front / Rear
Failed bulb or lamp 142 Rear lamps For more information on the bulbs, refer to the table "Types of bulb or lamp". Carry out these operations in reverse order to fit the new bulb. 1.Brake lampsType B, P21W - 21W 2.Brake/sidelampsType B, P 21/5W - 21W and 5W 3.Direction indicatorsType B, PY 21W - 21W 4.Reversing lampsType A, W16W - 16W 5.FoglampType A, W16W - 16W - Identify the failed bulb then open the rear doors. - Remove the corresponding access cover by removing the seven fixing screws (van) or Remove the corresponding access cover by pulling on its grip to unclip it (combi). - Disconnect the electrical connector by pressing on its central tongue. - Remove the two fixing nuts of the lens. - Pull the lens from the outside. - Remove the six bulb holder fixing screws. - Spread the three retaining tongues and remove the bulb holder from its housing. - Change the bulb.
Failed bulb or lamp 143QUICK HELP 8 Third brake lamp Type B , P21W - 21W - Unscrew the two screws. - Remove the lamp. - Remove the bulb holder moving aside the two tabs. - Remove the faulty bulb by pressing it lightly while turning it anticlockwise. - Change the bulb. Number plate lamps Type C, C5W - 5W - Press the point, indicated by the arrow, then remove the plastic lens. - Remove the failed bulb by moving aside the two contacts. - With the new bulb in place, ensure that it is secured correctly between the two contacts. - Replace the plastic lens and press on it to lock it in place.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131