Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Boxer 2006-2014 Owner's Manual Ease of Use and Comfort Ventilation (Heating, A/C, Demisting)

Ventilation 58 DEMISTING AND DEFROSTING Manual mode Direct the control to this air distribution setting. For faster and more effective demisting and defrosting of the windscreen: Defrosting the rear screen and mirrors Only operates when the engine is running. Pressing this button activates the rapid demisting-defrosting of the rear screen and door mirrors. This function switches off automatically to prevent excessive energy consumption. It stops when the engine is switched off but resumes when the engine is started again. Pressing this button switches the function off. - increase the air flow setting, Returning to the exterior air intake position permits renewal of the air in the passenger compartment. Windscreen and side windows The ventilation outlets located at the base of the windscreen and the side vents for the side windows increase the effectiveness of the demisting and defrosting. Do not obstruct these air outlets. The pollen filter continuously and effectively filters dust. Air recirculation (which can be activated by the driver or the passenger) isolates the passenger compartment from the exterior atmosphere. However, this position should only be used temporarily, normal use is to drive with the control positioned with the exterior air intake open. - move the exterior air intake control temporarily to air recirculation. With Stop & Start, when the heated rear screen is switched on, the STOP mode is not available.
Ventilation 593EASE OF USE and COMFORT CORRECT USE OF THE AIR CONDITIONING In order to be effective, the air conditioning should only be used with the windows closed. However, if the interior temperature remains high after a prolonged period parked in the sun, first ventilate the passenger compartment for a few minutes. For even air distribution, ensure that the exterior air intake grille located at the base of the windscreen, the side and central vents, the air outlets on the floor and the air extractor at the rear are not obstructed. The air conditioning is useful in all seasons as it eliminates condensation and air humidity. Operate the air conditioning system for 5 to 10 minutes, once or twice a month, to keep it in good working order. Have the filter elements (air filter and passenger compartment filter) replaced regularly. If you drive in a dusty environment, have them replaced twice as often. It is normal that the condensation created by the air conditioning system results in a flow of water which may form a puddle under the vehicle when parked. If the system does not produce cold air, do not use it and have it checked by a PEUGEOT dealer or a qualified workshop. "Leave them open" For optimum distribution and diffusion of hot or cool air in the passenger compartment, there are: 4 adjustable central vents, of which 2 can be directed sideways (right or left) towards the top of the body and 4 side vents which can be directed towards the passengers. The air vents directed towards the floor of the vehicle complete the equipment. Vents
Ventilation 60 MANUAL HEATING / AIR CONDITIONING If your vehicle is fitted with these controls, they are located on the dashboard on the centre console control panel. Comfort value adjustment Air flow The force of the blown air, from the vents, varies from 1 to the strongest 4. Remember to adjust this control in order to reach the ambient air comfort level. To switch off the blower, place the control in position 0. Air conditioning The air conditioning mode can only operate with the engine running. The air blower must be set to at least 1. Pressing the button triggers the operation of the air conditioning, the LED is on. Pressing the button again switches the function off and the LED is switched off. Air distribution The air supply distribution is directed by the control turned towards: the side vents and the central vents, the side vents, the central vents and the footwells, the footwells, the windscreen, the footwells and the side windows, the windscreen and the side windows. Control positioned: - in the blue zone provides cool air, - in the red zone provides heating of the interior ambient air.
Ventilation 613EASE OF USE and COMFORT Intake of exterior air Recommended settings for the manual air conditioning For optimum operation of this system, the settings below are recommended: Recirculation of interior air This position should only be temporary. Used with the air conditioning switched on and setting of the force of blown air (from 1 to 4), recirculation enables you to obtain the required ambient air comfort level with both hot or cold settings. Recirculation temporarily prevents exterior odours and smoke from entering the passenger compartment. If I require... Air distribution Temperature Air flow Air recirculation AC Heating - Cooling Demisting Defrosting When your ambient air comfort level has been reached, return to the intake of exterior air position to permit renewal of the air in the passenger compartment and demisting. This operating mode is preferable. This is the preferred operating position.
Ventilation 62 DIGITAL AIR CONDITIONING - MONO-ZONE If your vehicle is fitted with this system, the controls are located in the middle of the dashboard. AUTO mode Switching on FULL AUTO mode: pressing the AUTO control switches on the system's functions, confi rmed by the display of FULL AUTO . This is the normal operating mode for the digital air conditioning system. Using the moving ring surrounding the AUTO control, set the comfort temperature to be reached according to a setting between: - HI (High to ≈ 32) and, - LO (Low to ≈ 16). The system controls the distribution, flow and intake of air to ensure comfort equivalent to the setting displayed and sufficient recirculation of air in the passenger compartment. No further adjustments are required. Control screen for your digital air conditioning system. AUTO mode with personalisation Switch on in AUTO mode, certain settings can be modified: the distribution, the air flow, the air conditioning and the air intake/recirculation. The display changes from FULL AUTO to AUTO . To return to fully automatic operation, press this button again. The display on the control panel changes from AUTO to FULL AUTO . If the system is not able to maintain the setting selected following manual adjustments, the setting flashes then AUTOis cleared. Press the AUTO control to return to the automatic settings. Switching off the air conditioning Pressing this control switches off the air conditioning functions. The snowflake is cleared from the screen. Complete switch-off Pressing this control switches the system off. The LED and the screen switch off. When the engine is running and the air conditioning is on, this symbol and the message FULL AUTO are displayed. The other components are displayed according to the settings selected by the user.
Ventilation 633EASE OF USE and COMFORT Comfort value adjustment ring The settings range between: - increasing the interior ambient air temperature HI (High) which goes up to to a maximum setting of 32, - cooling the interior ambient air temperature LO (Low) which goes down to a setting of 16. Air distribution A press illuminates the LED on the buttons which distribute the air flow towards: the windscreen and front side window vents (demisting/defrosting the windows), the central and side vents (chest and face), the vents in the front and rear areas (feet). The combination of buttons permits improvement of air distribution. Air flow Successive presses of this button increase (+) or reduce (-) the force of the air flow to the interior. Intake of exterior air / Recirculation of interior air When the LED is on, the air recirculates inside the passenger compartment to prevent the entry of exterior odours and smoke. This position should be temporary. When the ambient air comfort level has been reached, pressing the button switches the LED off and reopens the exterior air intake. Pressing the AUTO button also restores the intake of exterior air. Returning to this position permits renewal of the air in the passenger compartment and demisting. Pressing the AUTO button again restores the FULL AUTO function. Rapid Demisting / Defrosting Pressing this control permits rapid clearing of the windows. The LED is on. The system manages the air conditioning, the flow and intake of air, the defrosting of the rear screen and provides optimum distribution of the air to the windscreen and front side windows. If your vehicle is fitted with additional heating, switch it off to ensure rapid and effective demisting/defrosting. ADDITIONAL REAR VENTILATION The controls for this system, additional to the standard cabin ventilation system, are on the lower dashboard, to the left of the steering wheel. Air outlet A press on this control activates the extraction of air to the outside; the LED comes on. Press again to switch off. Air inlet A press on this control activates the entry of air into the cabin; the LED comes on. Press again to switch off.
Ventilation 64 ADDITIONAL HEATING SYSTEMS Supplementary heating On the 2-3 seats version, this is located under the seat on the driver's side with air diffusion directed forwards. REAR HEATING AND / OR AIR CONDITIONING If your vehicle is fitted with an additional air conditioning unit, located in the rear of the vehicle: the distribution rail located in the roof and the individual diffusion vents provide a perfect diffusion of cold air. The warm air diffused at the floor, from the front air conditioning unit, is distributed at the feet of the rear passengers of rows 2 and 3. A warm air diffusion vent, located on the rear left wheelarch, may complete the assembly for the feet of the rear passengers of row 3. Additional heating This is passenger compartment heating, additional to the standard equipment. It can operate independently of the engine. Additional heater or programmable additional heating This is an additional, programmable and separate system which heats the Diesel engine hot coolant loop to make starting easier. It improves the demisting and defrosting performance and that of the heated seats, if fitted to the vehicle. The passenger compartment heating is brought up to temperature more rapidly. This system must be programmed to start up before you enter the vehicle. On the 5-9 seats version, it is located at the rear. Depending on the model version, the air diffusion is either direct from the rear or comes from the rail located under each of the two rows of seats. Press this control to activate/deactivate the heating. The LED is on if the heating is activated. When rapid demisting and defrosting is required, switch off the control.
Ventilation 653EASE OF USE and COMFORT Activation/Deactivation This control, located on the control panel at the left-hand end of the dashboard, enables you to activate/deactivate the operation of the rear controls from the driver's seat. The first press activates (LED on). A second press deactivates (LED off). To deactivate the fan, place the control in position 0. However, a safety device will ventilate the rear circuit automatically, even if the control is in position 0, to prevent the formation of condensation. Air flow The force of the fan blown air, via the vents, varies from 1 to the strongest 4. To obtain a comfortable level of ambient air, remember to adjust this control. Comfort value adjustment - on the blue, delivers cool air, - on the red, delivers heating of the ambient air. The OFF control on the "Mono-zone" central control panel switches the function off. Control positioned:
Ventilation 66 PROGRAMMABLE ADDITIONAL HEATING If your vehicle is fitted with separate programmable heating: it gradually brings the engine up to a good temperature to facilitate starting. An integrated clock permits programming of its start time. The passenger compartment will be heated more quickly. Heating cycle indicator Digital programming control The programmable heating system control panel is located at the bottom left of the dashboard. Display on Display of the programme number selected Time display button Time setting buttons Selection of the stored programme Button for immediate switching on of the heating Time setting and reading indicator
Ventilation 673EASE OF USE and COMFORT Setting the time of the internal clock Set the clock on the control panel before programming the deferred switching on of the heating. Immediate switching on of the heating Before switching on the heating, check that: - the temperature setting control is in the "Hot air" position (red). - the air flow setting control is in position 2. This symbol or the previous stored time and the number (e.g. 1) corresponding to the recalled pre-selection are displayed for ten seconds. Note: if you wish to recall the other pre-selected times, press the SET button several times before the ten seconds have elapsed. Press this button. The screen and the associated indicator come on. Within ten seconds, press these two setting buttons until the correct time is displayed. Press ">" to increase the hours or "<" to decrease. Press and hold the button for more rapid scrolling of the digits. Reading the time Press this button. This indicator comes on, the time is displayed for approximately ten seconds. Press this button. The screen and the heating cycle indicator come on and remain on throughout the duration of operation. Switching on the deferred heating Switching on can be programmed between one minute and twenty-four hours in advance. You can store up to three different start times, but programme one deferred start only. Note: if you wish to start the heating at a fixed time each day, simply reprogramme the stored time each day. Press this button, the screen becomes brighter. Within the ten seconds, press these two setting buttons to select the required start time. Setting of the stored time is confirmed by clearing of the start time, displaying of the pre-selection number (e.g. 1) and increased brightness of the screen illumination.
Ventilation 68 Cancelling the programming Press this button briefly to clear the programmed start time. The scren illumination and the pre-selection number (e.g. 1) are switched off. Good practice To avoid any risk of poisoning or asphyxiation, the additional heating must not be used, even for short periods, in an enclosed space such as a garage or workshop which is not fitted with an exhaust gas extraction system. The additional heating is supplied by the vehicle's fuel tank. Ensure that the fuel gauge indicator lamp is not at reserve. Always switch off the additional heating when filling with fuel to avoid any risk of fire or explosion. Do not park the vehicle on an inflammable surface (dry grass, dead leaves, paper…), there is a risk of fire. The temperature near the heater must not exceed 120 °C. A temperature higher than this (for example in the case of painting in an oven) could damage the components of the electronic circuits. The additional heating system is fitted with a temperature limiter which cuts off the combustion in the event of overheating due to a lack of coolant. Top up the coolant, then press the programme selection control before switching the heating on again. Have the additional heating system checked at least once a year at the beginning of winter. Maintenance and repairs should only be carried out by a PEUGEOT dealer. Use only genuine replacement parts. Recalling one of the pre-selected start times Press this button as many times as necessary until the number corresponding to the required pre-selected start time (e.g. 2) appears. After ten seconds, the time is cleared but remains stored for as long as the number (e.g. 2) and the screen remain lit. Switching off the heating Press this button. The heating cycle indicator and the screen are switched off. Two different types of equipment The additional heating is separate and programmable. Before you enter the vehicle, it gradually increases the temperature of the engine to make starting easier. This also facilitates passenger compartment heating, demisting and defrosting. The additional passenger compartment heating system supplements the standard equipment. Its operation may be independent of the engine. Switching on of the heating may be programmable.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131