Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Boxer 2006-2014 Owner's Manual Ease of Use and Comfort Seats (Front, Rear, Bench)

Seats 693EASE OF USE and COMFORT DRIVER'S SEAT Head restraint Press the tab to adjust the height of the head restraint. To remove the head restraint, press the tabs and raise the head restraint. Adjustable armrest Raise or, lower the armrest. Turn the wheel located under the end of the armrest to lock it in the desired position.
Seats 70 Lumbar support Turn the control. Seat cushion height adjustment Lift the handle 1 to raise or lower the front of the seat. Lift the handle 2 to raise or lower the rear of the seat. Heated seat Use this control to switch the heating of the seat on or off. Seat with variable damping If your seat is fitted with this system, turn the control to adjust the level of damping to suit the driver's weight. Seat back angle Turn the control to adjust the angle of the seat back. Forwards-backwards adjustment Lift the control bar, located under the seat, and adjust to the required position. Rotating seat If fitted on your seat, press the control to rotate the seat by 180°.
Seats 713EASE OF USE and COMFORT 2-SEAT FRONT BENCH This is fitted with two seat belts. Grab handle This is located above the centre passenger. Writing table The back of the centre seat folds to form a writing table. Pull the handle located at the top of the seat back cushion.
Seats 72 REAR SEATS Seat back angle Turn the control to adjust the angle of the seat back. Access to the rear seats To gain access to row 3, manoeuvre the control on the outer seat of row 2 and tilt the seat back forwards. To return the seat back to its initial position, bring it to the vertical position without touching the control. Seat back folded position of the central seat (rows 2 and 3) The back of the central seat can be folded fully onto the cushion and used as a cup holder table. Lower the head restraint then raise the control and fold the seat back forwards. To return the seat back to its initial position, raise the control again.
Seats 733EASE OF USE and COMFORT REAR BENCH SEATS Removing the bench seat At least two people are required to remove the bench seat. Fold the seat back onto the cushion as described above. Turn the two levers forwards. Tilt the base of the bench seat forwards to place the assembly in the vertical position. Good practice Following the various operations: - do not remove a head restraint without storing it securely, - do not travel in row 3 with the row 2 bench seat in the vertical position, - do not store any kind of object on the folded seat back of row 2, - check that the seat belts are always accessible and easy for the passenger to use, - a passenger must not take their seat without correctly adjusting their seat's head restraint and adjusting and fastening their seat belt. Access to the rear seats Lower the head restraints then raise the control and tilt the seat back forwards. Seat back folded position Remove the head restraints then tilt the seat back as described above. With your right hand, raise the lever then tilt the seat back 5° towards the rear. With your left hand, tilt the seat back forwards onto the cushion. Turn the two levers upwards. Raise the bench seat and remove it.
Seats 74 CREW CAB Access to the box under the bench seat From the cab Tilt the seat cushion forwards to gain access to the large box. From the load space Raise the two flaps which make the full length at the floor available. The flaps are retained in the raised position by magnets on the back of the partition. Good practice Do not tilt the bench seat cushion during transportation. No not attach anything to the cab fixing structure. Do not exceed the number of passengers indicated on the registration certificate. Do not install child seats, booster cushions or carrycots on the rear seats of the crew cab. In the rear, the load space is intended for the transportation of goods only. You are advised to place the goods or heavy objects as far forwards as possible in the load space (towards the cab) and secure them by means of straps using the stowing rings on the floor. Consisting of an ergonomic 4-seat bench and a high-strength partition, it offers comfort and safety. Each seat of the bench is fitted with an inertia reel seat belt. Refer to the "Safety - Seat belts" section.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131