Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Boxer 2006-2014 Owner's Manual Ease of Use and Comfort Fittings (Cab, Rear, Mirrors, Windows)

Practical information 753EASE OF USE and COMFORT CABIN FITTINGS Front seat storage A storage drawer is provided under the driver's seat. Central storage tray This may be lockable (according to specification). If your vehicle is fitted with a seat with variable damping, it does not have any storage compartments. The space under the passenger's seat is used to store the tool box containing the tools required to change a wheel or bulb or to tow the vehicle.
Practical information 76 Folding writing table This is located in the centre of the dashboard. The clip can be used to secure documents, slips, ... Pull or push the top of the table to unfold or fold it. Fittings/storage compartment in the door trays Glove box To insert or extract a CD, you must first fold the table. If your vehicle is fitted with a passenger's front airbag, the table cannot be raised.
Practical information 773EASE OF USE and COMFORT Cooled glove box This is located on the top right part of the fascia panel. The air blown into the glove box is the same as that blown out via the vents. Sun visor To avoid glare from ahead, fold the sun visor down. Pockets are arranged in the sun visors for storing toll cards, tickets, ... 12 volt socket Press and wait a few moments until the lighter pops out automatically. When used as a socket: 180 W max.
Practical information 78 Cigarette lighter / Portable ashtray After opening the ashtray, pull it upwards then empty it into a bin. Overhead storage compartment This is located above the sun visors. Maximum load: approximately 20 kg. Courtesy lamp This is a double courtesy lamp located in the centre of the roof. It can be activated by means of: - the switches located on the courtesy lamp, with the ignition on - RUNNING position, - opening or closing one of the front doors, - locking/unlocking the vehicle. It switches off automatically: - if the switch is not pressed to the right or to the left, - in all cases after 15 minutes, if the doors remain open or when the ignition is switched on.
Practical information 793EASE OF USE and COMFORT Controls located at bottom left of the dashboard allow the driver to activate/deactivate the passenger spotlamp. Reading lamps These are controlled by the switches. The driver's switch controls both reading lamps simultaneously. The passenger switch controls either the driver's reading lamp or the passenger's reading lamp.
Practical information 80 LOAD SPACE FITTINGS Support for stowing rail Supports for securing a stowing rail are available above the trims, on each side of the vehicle. Maximum load: 200 kg. 12 volt socket When used as a power socket: 180 W max. Lashing rings Lashing rings are provided on the floor to secure and make safe your loads: 8 for L1 and L2 length vehicles, 10 for L3 and L4 length vehicles. Two additional rings are located on the partition behind the cab. Maximum load: 500 kg. Trims The lower parts of the sides are fitted with load protection trims. As a safety precaution in case of sharp braking, you are advised to place heavy objects as far forwards towards the cab as possible.
Practical information 813EASE OF USE and COMFORT Sliding side windows Depending on the vehicle's equipment, the side windows of row 2 can be opened. Squeeze the two controls then slide the window. While driving, the window must be closed or secured in an intermediate position. Folding step To make access and exit easier, your vehicle may be fitted with a step which unfolds when the sliding side door is opened. Courtesy lamps If fitted on your vehicle, one or two courtesy lamps are located above the rear and side doors. They can be activated by: - tilting the courtesy lamp (to the left or to the right), - opening or closing the rear or side doors. This lighting switches off automatically, after a few minutes, if the doors are left open. Reading lamps They are located above each row of seats. Torch If provided in your vehicle. Roof box This is a storage compartment located in the load space, above the cab roof. Its capacity varies depending on the height of the van roof. Ladder type vertical partition Behind the driver's seat, a ladder type vertical partition protects the driver against the risk of load movement. Load retainer On the floor, behind the front seats, a horizontal partition protects the driver and front passengers against the risk of load movement. Glazed separation partition Use the control to open/close the sliding window of the separation partition.
Mirrors and windows 82 MIRRORS Door mirrors These are divided into two zones: A - Upper mirror B - Lower mirror The mirror glass is spherical in order to widen the lateral field of vision. Objects seen in the mirror are in reality closer than they appear. Therefore, this must be taken into account in order to assess the distance correctly. The shell incorporates the direction indicator side repeater and the aerials, according to the equipment available on board (GPS, GSM, Radio, ...). Electrical controls The ignition switch must be in the MAR position. Turn the control to select the mirror zone. 1 Driver's mirror: A1 - Upper mirror B1 - Lower mirror Then move the control in the direction of the adjustment required. 2 Passenger mirror: A2 - Upper mirror B2 - Lower mirror Then move the control in the direction of the adjustment required. Rear view mirror The lever located on the lower edge moves the mirror into two positions. For the day position, the lever is pushed. For the night position to prevent dazzle, pull the lever towards you. Electric folding Press this control. Defrosting the mirrors Press the rear screen defrosting button.
Mirrors and windows 833EASE OF USE and COMFORT ELECTRIC WINDOWS A.Driver's electric windowB.Passenger's electric window You have two options: Manual operation Press or pull control switch A , without passing the point of resistance. The window stops when you release the control switch. Automatic operation Press or pull control switch A/B , beyond the point of resistance: the window opens or closes fully when the control is released. Pressing the control switch again stops the movement of the window. Good practice Always remove the key from the ignition when leaving the vehicle, even for a short time. If the electric windows meet an obstacle during operation, you must reverse the movement of the window. To do this, press the control switch in question. When the driver operates the passenger electric windows, they must ensure that no one is preventing correct closing of the windows. The driver must ensure that the passengers use the electric windows correctly. Be aware of children when operating the windows.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131