Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Boxer 2006-2014 Owner's Manual Checks Checks (Filters, Brake pads)

Levels and checks 126 The presence of this label, in particular with the Stop & Start system, indicates the use of a specifi c 12 V lead-acid battery with special technology and specifi cation. The involvement of a PEUGEOT dealer or a qualifi ed workshop is essential when replacing or disconnecting the battery. These operations will keep your vehicle in good running order. Ask for advice from a PEUGEOT dealer or refer to the warranty and maintenance record included in the handbook pack. CHECKS Battery At the start of winter, have your battery checked by a PEUGEOT dealer or a qualified workshop. Bleeding water from the Diesel filter If this warning lamp comes on, bleed the filter, or bleed regularly each time the engine oil is changed. To drain the water out, unscrew the bleed screw or the water in Diesel sensor, located at the base of the filter. Leave open until all of the water has been drained out. Then tighten the bleed screw or the water sensor. Air filter and passenger compartment filter A clogged passenger compartment filter may reduce the performance of the air conditioning system and generate undesirable odours. The replacement intervals for these components are given in the warranty and maintenance record. Depending on the environment (dusty atmosphere...) and the use of the vehicle (urban driving...), change them twice as often if necessary. Refer to the "Checks - Under the bonnet" section. HDi engines use advanced technology. All work requires a special qualification which is guaranteed by a PEUGEOT dealer or a qualified workshop.
Levels and checks 1277CHECKS Manual gearbox Have the level checked in accordance with the manufacturer's servicing schedule. Good practice To check the main levels and certain components, in accordance with the manufacturer's servicing schedule, refer to the pages of the warranty and maintenance record which correspond to your vehicle's engine. Only use products recommended by PEUGEOT or products of equivalent quality and specification. In order to optimise the operation of units as important as the braking system, PEUGEOT selects and offers specific products. Oil filter Change the filter regularly, in accordance with the manufacturer's servicing schedule. Brake pads Brake pad wear depends on the style of driving, in particular for vehicles which are used in town, over short distances. It may be necessary to check the thickness of the pads, even between services. Brake disc/drum wear status For any information relating to checking the brake disc/drum wear status, contact a PEUGEOT dealer or a qualified workshop. Parking brake Where the parking brake travel is too great or there is a reduction in the performance of the system, the parking brake should be adjusted, even between services. Have the system checked by a PEUGEOT dealer or a qualified workshop. If this warning lamp comes on, have the brake pad wear checked by a PEUGEOT dealer or a qualified workshop. In order to avoid damaging the electrical units, high pressure washing to clean the engine compartment is strictly prohibited. After washing the vehicle dampness, or in winter, ice may form on the brake discs and pads: braking efficiency may be reduced. Make some light brake applications to dry and de-ice the brakes.
Levels and checks 128 Operating fault If this alert persists, do not ignore the warning; it indicates that a fault has occurred in the exhaust / particle filter system. Have the whole system checked by a PEUGEOT dealer or a qualified workshop. If there is risk of blockage of the filter, this warning lamp comes on in the instrument panel. Saturation / Regeneration Because of the higher exhaust gas temperature resulting from the normal operation of the particle filter, it is recommended that you do not park the vehicle over inflammable materials (grass, dry leaves, pine needles, ...) so as to avoid any risk of fire. Particle filter system (Diesel) An addition to the catalytic converter, this filter makes an active contribution to the preservation of air quality by the retaining of the unburnt pollutant particles. Black exhaust fumes are thus no longer emitted. Operation This filter, fitted to the exhaust system, accumulates particles of soot. The engine management unit controls the automatic periodic elimination of the soot particles (regeneration). The regeneration procedure is invoked according to the quantity of particles accumulated and the driving conditions of the vehicle. During this phase, you may notice some unusual phenomena - increased idling speed, cooling fan running, increase in smoke and higher exhaust gas temperature - which does not affect the operation of the vehicle or the environment. After prolonged idling or driving at very low speeds, you may occasionally notice water vapour being emitted from the exhaust when accelerating. This is of no consequence to the running of the vehicle or to the environment. To regenerate the filter, it is advised to drive as soon as possible, when traffic conditions and the law permit, at a speed of at least 40 mph (around 60 km/h), with an engine speed above 2 000 rpm for about fifteen minutes (until the warning lamp and/or the message disappears). If possible, avoid switching off the engine before the end of regeneration of the filter; repeated interruptions could cause premature deterioration of the engine oil. It is not recommended to end regeneration of the filter with the vehicle stationary. This alert tells you that the particle filter is starting to fill up (in conditions of urban driving of exceptionally long duration: low speeds, traffic jams etc.)
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131