Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Boxer 1994-2006 Owner's Manual Ventilation Additional Heating Systems

42VentilationADDITIONAL HEATING SYSTEMSEquipment with different specifications and functions.Additional heatingThis is an additional passenger compartment heating system which supplements the standard equipment.It can operate independently of the engine.Depending on the level of finish of the equipment, its start-up can be programmed.Additional heater or programmable heatingThis is an additional and autonomous system which heats the diesel engine hot coolant loop to make starting easier.It improves the de-icing and demisting performance and that of the heated seats, if fitted in the vehicle.The passenger compartment heating is brought up to temperature more rapidly.This system must be programmed to start up before you enter the vehicle.Supplementary heatingOn the 2-3 seats version, this is located under the seat on the driver’s side with air diffusion directed forwards.On the 5-9 seats version, it is located at the rear. Depending on the model version, the air diffusion is either direct from the rear or comes from the rail located under each of the two rows of seats.Press this control to activate/deactivate the heating. The diode is lit if the heating is activated.When rapid de-icing and demisting is required, switch off the control.REAR HEATING AND/OR AIR CONDITIONINGIf your vehicle is fitted with an additional air conditioning unit, located in the rear of the vehicle: the distribution rail located in the roof and the individual diffusion vents provide a perfect diffusion of cold air.The warm air diffused at the floor, from the front air conditioning unit, is distributed at the feet of the rear passengers of rows 2 and 3.A warm air diffusion vent, located on the rear left wheelarch, may complete the assembly for the feet of the rear passengers of row 3.
43Activation/DeactivationThis control, located on the control pad at the right-hand end of the fascia, enables you to activate/deactivate the operation of the rear controls from the driver’s seat.The first press activates (diode lit).A second press deactivates (diode off).Air flowThe force of the blown air, via the vents, varies from 1 to the strongest 4.To obtain a comfortable level of ambient air, remember to adjust this control.To deactivate the blower, place the control in position 0.Comfort value adjustmentControl positioned:- on the blue, triggers cool air,- on the red, triggers heating of the ambient air.The OFF control on the "Mono-zone" central control panel switches the function off.However, a safety device will ventilate the rear circuit automatically, even if the control is in position 0, to prevent the formation of condensation.VentilationERGONOMICS and COMFORT3
44VentilationPROGRAMMABLE ADDITIONAL HEATINGIf your vehicle is fitted with autonomous programmable heating: it gradually brings the engine up to a good temperature to facilitate starting.An integrated clock permits programming of its start time. The passenger compartment will be heated more quickly.Digital programming controlThe programmable heating system control panel is located at the bottom right of the fascia panel.Heating cycle indicator lightDisplay onDisplaying of the number of the programme selectedTime display buttonTime setting buttonsSelection of the stored programmeButton for immediate switching on of the heatingTime setting and reading indicator light
45Setting the time of the internal clockSet the clock on the control panel before programming the deferred switching on of the heating.Press this button. The display and the associated indicator light come on.Within ten seconds, press these two setting buttons until the correct time is displayed.Press ">" to increase the hours or "<" to decrease.Press and hold the button for more rapid scrolling of the digits. Reading the timePress this button.This indicator light comes on, the time is displayed for approximately ten seconds.Immediate switching on of the heatingBefore switching on the heating, check that:- the temperature setting control is in the "Hot air" position (red).- the air flow setting control is in position 2.Press this button.The display and the heating cycle indicator light come on and remain on throughout the duration of operation.Switching on the deferred heatingSwitching on can be programmed between one minute and twenty-four hours in advance.You can store up to three different start times, but programme one deferred start only.Note: if you wish to start the heating at a fixed time each day, simply reprogramme the stored time each day.Press this button, the display becomes overbright. This symbol or the previous stored time and the number (e.g. 1) corresponding to the recalled pre-selection are displayed for ten seconds.Note: if you wish to recall the other pre-selected times, press the SET button several times before the ten seconds have elapsed.Within the ten seconds, press these two setting buttons to select the required start time.Setting of the stored time is confirmed by clearing of the start time, displaying of the pre-selection number (e.g. 1) and overbrightness of the display lighting.VentilationERGONOMICS and COMFORT3
46VentilationCancelling the programmingPress this button briefly to clear the programmed start time.The display lighting and the pre-selection number (e.g. 1) are switched off.Recalling one of the pre-selected start timesPress this button as many times as necessary until the number corresponding to the required pre-selected start time (e.g. 2) appears.After ten seconds, the time is cleared but remains stored for as long as the number (e.g. 2) and the display remain lit.Switching off the heatingPress this button.The heating cycle indicator light and the display are switched off.Good practiceTo avoid any risk of poisoning or asphyxiation, the additional heating must not be used, even for short periods, in an enclosed space such as a garage or workshop which is not fitted with an exhaust gas extraction system.The additional heating is supplied by the vehicle’s fuel tank. Ensure that the fuel gauge indicator light is not at reserve.Always switch off the additional heating when filling with fuel to avoid any risk of fire or explosion.Do not park the vehicle on an inflammable surface (dry grass, dead leaves, paper…), there is a risk of fire.The temperature near the heater must not exceed 120 °C. A temperature higher than this (for example in the case of painting in an oven) could damage the components of the electronic circuits.The additional heating system is fitted with a temperature limiter which cuts off the combustion in the event of overheating due to a lack of coolant. Top up the coolant, then press the programme selection control before switching the heating on again.Have the additional heating system checked at least once a year at the beginning of winter. Maintenance and repairs should only be carried out by a PEUGEOT dealer. Use recommended replacement parts only.Two different types of equipmentThe additional heating is autonomous and programmable. Before you enter the vehicle, it gradually increases the temperature of the engine to make starting easier.This also facilitates passenger compartment heating, de-icing and demisting.The additional passenger compartment heating system supplements the standard equipment. Its operation may be independent of the engine. Switching on of the heating may be programmable.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131