Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot Boxer 1994-2006 Owner's Manual Instruments and controls Gauges (Fuel, Temperature)

24Instruments and controlsFUEL GAUGEThe fuel level is tested each time the key is turned to the "running" position.The gauge is positioned on:- F (Full): the fuel tank is full, approximately 90 litres.- E (Empty): the reserve is now being used, the warning light comes on continuously.The reserve when the warning first comes on is approximately 11 litres.Refer to the "Fuel" section of chapter 7.COOLANT TEMPERATUREThe needle is positioned between C (Cold) and H (Hot): normal operation.In arduous conditions of use or hot climatic conditions, the needle may move close to the red graduations.What you should do if the needle enters the red zone, or if the warning light comes on:- stop immediately, switch off the ignition. The fan may continue to operate for a certain time up to approximately 10 minutes.- wait for the engine to cool down in order to check the level and top it up if necessary. Follow this advice:the cooling system is pressurised. In order to avoid any risk of scalding, unscrew the cap by two turns to allow the pressure to drop.When the pressure has dropped, check the level and remove the cap to top up.If the needle remains in the red zone, contact a PEUGEOT dealer.Refer to the "Levels" section of chapter 7.EMISSION CONTROLEOBD (European On Board Diagnosis) is a diagnostics system which complies with, among others, the standards concerning authorised emissions of:- CO (carbon monoxide),- HC (unburnt hydrocarbons),- NOx (nitrogen oxides) or particles, detected by oxygen sensors placed upstream and downstream of the catalytic converters.Therefore, the driver is warned of any malfunction of this emission control system by the lighting of this specific warning light on the instrument panel.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131