Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 5008 2024- 2025 Owner's Manual Lighting and visibility Automatic lighting systems - General recommendations

Lighting and visibility734The inner surface of the windscreen maybecome misted up and affect the properoperation of the rain/sunshine sensor.In humid and cold weather, demist thewindscreen regularly.Guide-me-home andwelcome lightingGuide-me-home lightingAutomaticWith the ring of the lighting control stalk in the"AUTO” position and when the light is poor, thedipped beam headlamps come on automaticallywhen the ignition is switched off.You can activate/deactivate and ad-just the duration of the guide-me-home lighting in the Settings > Vehi-cle touch screen application.Manual►With the ignition off, pull the lighting controlstalk toward you ("headlamp flash") toactivate/ deactivate the function.Manual guide-me-home lighting goes offautomatically after a period of time.Welcome lightingWhen the vehicle is unlocked in low lightconditions and the "Automatic illumination ofheadlamps" function is activated, this systemautomatically switches on:–On the outside, sidelamps, dipped beamheadlamps and door mirror spotlamps.–Inside, courtesy lamps and footwell lighting.Door mirror spotlampsThese spotlamps facilitate access to the vehicleby lighting the ground near the front doors.The spotlamps come on automatically:–when the vehicle is unlocked.–when a door is opened.–when a request to locate the vehicle isreceived from the remote control.They also come on with the welcome lightingand guide-me-home lighting functions.They go off automatically after 30 seconds.Automatic lightingsystems - GeneralrecommendationsThe automatic lighting systems use a detectioncamera, located at the top of the windscreen.Operating limitsThe system may be disrupted or not workcorrectly:–When visibility conditions are poor (e.g.snowfall, heavy rain).–If the windscreen is dirty, misted-up ormasked (e.g. sticker) in front of the camera.–If the vehicle is facing highly reflective signsor safety barrier reflectors.The system is not able to detect:–Road users that do not have their ownlighting, such as pedestrians.–Vehicles with hidden lighting (e.g. travellingbehind a safety barrier on the motorway).–Vehicles at the top or bottom of a steepslope, on winding roads, on crossroads.MaintenanceClean the windscreen regularly,particularly the area in front of the camera.The internal surface of the windscreen canalso become misted around the camera.In humid and cold weather, demist thewindscreen regularly.Do not allow snow to accumulate on thebonnet or roof of the vehicle as this couldobstruct the camera.
With the ring of the lighting control stalk inthe "AUTO" position and the function activatedon the touch screen, this system automaticallyswitches between dipped and main beamheadlamps, according to lighting and trafficconditions, using a camera located at the top ofthe windscreen.This system is a driving aid.The driver remains responsible for thevehicle's lighting, its correct use in theprevailing light, visibility and traffic conditions,and for compliance with driving and vehicleregulations.The system becomes operational whenthe vehicle exceeds 28 mph (45 km/h).When the speed falls below 22 mph (35km/h), the system is no longer operational.Activation/DeactivationIt is configured in the Settings > Ve-hicle touch screen application.The state of the system is stored when theignition is switched off.When the system detects thick fog, ittemporarily deactivates the function.OperationIf the ambient light level is very low and trafficconditions permit:–The main beam head-lamps come on automat-ically. These indicatorlamps light up on the in-strument panel.If the ambient light level is sufficient and/or thetraffic conditions do not allow the main beamheadlamps to be lit:–The dipped beam head-lamps remain lit. These in-dicator lamps light up onthe instrument panel.The function is deactivated if the foglamps areswitched on.When the foglamps are switched off, the functionis automatically reactivated.This indicator lamp goes out whenthe function is deactivated.PauseIf the situation requires a change of headlampbeam, the driver can take over at any time.►Switch the headlamps manually betweendipped and main beam to pause the function.If the "AUTO" and "Dipped beam" indicatorlamps were on, the system changes to mainbeam.If the "AUTO" and "Main beam" indicator lampswere on, the system changes to dipped beam.►To reactivate the function, once again switchthe headlamps manually between dipped andmain beam.MalfunctionIf a malfunction occurs with the sys-tem or the camera, this warning lamplights up on the instrument panel, ac-companied by an audible signal anda message.Lighting and visibility74Automatic headlampdippingFor more information, refer tothe General recommendations forautomatic lighting systems.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131