Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 5008 2024- 2025 Owner's Manual In the event of a breakdown Towing the vehicle

To reach the battery:►Open the front armrest.►Unclip the compartment's floor.(+) Positive terminal, protected by a red plasticcover (not accessible).(-) Negative terminal with a black quick-releaseconnector.Charging the front battery using a batterychargerFor optimum service life of the front battery, itis essential to maintain an adequate state ofcharge.In some circumstances, it may be necessary tocharge the front battery:– When using the vehicle mainly for shortjourneys.– If the vehicle is to be taken off the road forseveral weeks.Consult a PEUGEOT dealer or a qualifiedworkshop.To charge the vehicle's front batteryyourself, use only a charger compatiblewith lead-acid batteries with a nominalvoltage of 12 V.Follow the instructions provided by themanufacturer of the charger.Never reverse polarities.It is not necessary to disconnect thebattery.►Switch the ignition off.►Switch off all electrical consumers (audiosystem, lighting, wipers, etc.).►Switch off charger B before connecting thecables to the battery, so as to avoid anydangerous sparks.►Ensure that the charger cables are in goodcondition.►Lift the plastic cover on the (+) terminal, if thevehicle has one.►Connect the cables of charger B as follows:• Positive (+) red cable to the (+) terminal onbattery A.• Negative (-) black cable to earth point C on thevehicle.►At the end of the charging operation, switchoff charger B before disconnecting the cablesfrom battery A.Disconnecting/reconnecting theaccessory batteriesProcedure for disconnecting/reconnecting theaccessory batteries in the event of long-termimmobilisation of the vehicle.Before disconnecting the accessory batteries:►Open the driver's door and boot.In the event of a breakdown2198
►Close all other doors.►Switch off all electrical consumers (audiosystem, wipers, lamps, etc.).►Switch off the ignition and wait for theREADY indicator lamp to go out.►Observe a waiting time of 4 minutes.Never reverse the order of the stepsfor disconnecting and reconnecting theaccessory batteries - risk of irreversibledamage!DisconnectionCentral battery:►Disconnect the (-) terminal using the blackquick-release connector.Front battery:►Disconnect the (+) terminal by disconnectingthe red quick-release clamp:• Raise lever A fully to release clamp B.• Remove clamp B by lifting it off.ReconnectionFront battery:►Connect the (+) terminal by connecting thered quick-release clamp:• Raise lever A fully.• Refit open clamp B on the (+) terminal.• Push clamp B fully down.• Lower lever A to lock clamp B.Central battery:►Connect the (-) terminal using the blackquick-release connector.Following reconnectionAfter reconnecting the battery, turn on theignition and wait 1 minute before starting theengine, to enable the electronic systems toinitialise.If minor problems nevertheless persist followingthis operation, contact a PEUGEOT dealer or aqualified workshop.Referring to the relevant section, reinitialisecertain equipment:– Electronic key.– Sunroof.– Electric windows.– Date and time.– Preset radio stations.After reconnecting the battery, themessage " Collision risk detectionsystem fault " is displayed on the instrumentpanel when the ignition is switched on. Thisoperation is perfectly normal. The messagewill disappear while driving.In the event of a breakdown220
General recommendationsObserve the legislation in force in thecountry where you are driving.Check that the towing vehicle is heavier thanthe towed vehicle.The driver must remain at the wheel of thetowed vehicle and must have a valid drivinglicence.When towing a vehicle with all four wheels onthe ground, always use an approved towbar;ropes and straps are prohibited.The towing vehicle must move off gently.When the vehicle is towed with its engineoff, there is no longer braking and steeringassistance.A professional recovery service mustbe called in the following cases:– broken down on a motorway or main road;– not possible to put the gearbox into neutral,unlock the steering, or release the parkingbrake;– not possible to tow a vehicle with anautomatic gearbox, with the engine running;– towing with only two wheels on the ground;– four-wheel drive vehicle;– no approved towbar available.Before towing the vehicle, it is essential toput the vehicle in free-wheeling mode.For more information on Free-wheeling, referto the corresponding section.Special feature of towing for hybridvehiclesWith both rear wheels on the ground: itis only authorized for short distances (about9 miles (15 km)) and at reduced speed(maximum 15 mph (25 km/h)).With all four wheels on the ground: thevehicle can be towed a maximum of 0.06 mile(100 metres) at a maximum speed of 6 mph(10 km/h) (automatic gearbox in mode N andN displayed in the instrument panel).Rechargeable hybrid vehiclesBefore any intervention, with the ignitionon, depress the brake pedal and select modeN , then switch off the hybrid system (READYindicator lamp off).Always call on professionals for recovery ofthe vehicle on a flatbed lorry or trailer.Use the towing eye only to free the vehicleif it is stuck, or to secure it for recovery on aflatbed lorry or trailer.Electric vehiclesAn electric vehicle cannot under anycircumstances be used to tow anothervehicle.However, it may be used, for example, to exita rut.In the event of a breakdown2218Towing the vehicle
Towing constraintsType of vehicle (en-gine/gearbox)Front wheels on thegroundRear wheels on thegroundFlatbed4 wheels on the groundwith towbarInternal combustion/Auto-maticHybrid/AutomaticRechargeable hybrid 2WDElectric 2WDElectric 4WD2WD: 2-wheel drive.4WD: 4-wheel drive.In the event of a breakdown222
In case of battery or electric parking brakefailure, it is essential to call a professionalusing flatbed recovery vehicles.Accessing the toolsFor more information on accessing the Tool kit,refer to the corresponding section.Towing your vehicleTo access the front screw thread:►Unclip the cover by pressing at its toplefthand corner.►Release the cover downwards.To be towed:►Screw the towing eye in fully.►Install the towbar.►Put the gearbox into neutral.Failure to observe this instruction couldresult in damage to certain components(e.g. braking, transmission) and to theabsence of braking assistance the next timethe engine is started.Never tow the vehicle with the drivingwheels on the ground and the engine off.►Unlock the steering and release the parkingbrake.►Switch on the hazard warning lamps on bothvehicles in accordance with the legislation inforce in the country in which you are driving.►Move off gently, drive slowly and only for ashort distance.Towing another vehicleTo access the rear screw thread:►Unclip the cover by pressing at its left-handsection.►Pull the cover downwards.To tow:►Screw the towing eye in fully.►Install the towbar.►Switch on the hazard warning lamps on bothvehicles.►Move off gently, drive slowly and only for ashort distance.In the event of a breakdown2238
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131