Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 5008 2024- 2025 Owner's Manual In the event of a breakdown Changing a bulb

Then for all versions►Extend jack 6 using the wheelbrace 5, untilits head comes into contact with jacking pointA or B; contact area A or B on the vehiclemust be properly inserted into the central partof the head of the jack.►Raise the vehicle until there is sufficientspace between the wheel and the ground toeasily admit the spare (not punctured) wheel.Ensure that the jack is stable. If the groundis slippery or loose, the jack may slip orcollapse - risk of injury! Take care to positionthe jack strictly at one of the jacking points Aor B under the vehicle, ensuring that the headof the jack is centred under the contact areaon the vehicle.Otherwise, there is a risk of damage to thevehicle and/or of the jack collapsing - risk ofinjury!►Remove the bolts and store them in a cleanplace.►Remove the wheel.Fitting a wheelFitting a steel or "space-saver" type sparewheelFor petrol and hybrid versionsIf the vehicle is fitted with alloy wheels, thewashersA do notmakecontactwith thesteel or"space-saver" type spare wheel. The wheel is held inplace by the conical contact surface B ofeach bolt.For rechargeable hybrid and electricversionsIf the vehicle is fitted with alloy wheels, thewheel is held in place by the spherical contactsurface C of each bolt.In the event of a breakdown2098
►Fit the wheel on the hub.►Screw in the bolts by hand as far as possible.►Pre-tighten the security bolt using thewheelbrace 5 equipped with a security socket2.►Pre-tighten the other bolts using thewheelbrace 5 only.►Lower the vehicle again fully.►Fold jack 6 and remove it.For high range electric versions, checkthat the flexible cover is back in placewhen the jack is folded back to the front Ajacking point; if not, replace it manually.►Tighten the security bolt using thewheelbrace 5 equipped with a security socket2.►Tighten the other bolts using the wheelbrace5 only.►Refit the bolt covers to each of the bolts(depending on equipment).►Store the tools.After changing a wheelThe damaged wheel can not be stored in placeof the spare wheel.With a non-standard or 'space-saver'spare wheelDeactivate certain driving aid functions(Active Safety Brake, Adaptive cruise control,etc.).Do not exceed the maximum authorisedspeed of 50 mph (80 km/h) or the maximumdistance of 50 miles (80 km).Driving with more than one spare wheel ofthis type is prohibited.The wheel trim from the replaced wheel mustnot be refitted.Go to a PEUGEOT dealer or a qualifiedworkshop.Have the tightening of the spare wheel's boltsand its tyre pressure checked.Have the punctured tyre examined. Afterinspection, the technician will advise you onwhether the tyre can be repaired or if it mustbe replaced.In the event of a breakdown210
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131