Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 5008 2024- 2025 Owner's Manual Driving Speed limiter

When a new speed setting is detected, thesystem displays the value and “OK?" to suggestsaving it as a new speed setting.If there is a difference of less than 3mph (5 km/h) between the speed settingand the speed displayed by the Roadsigns recognition, the "OK?" symbol is notdisplayed.Depending on the road conditions, severalspeeds may be displayed.►Press 3-OK to confirm the new speed setting.The display then reverts to its previous state.Extended Traffic SignRecognitionFor more information, refer to the Generalrecommendations on the use of drivingand manoeuvring aids.This additional system recognises these roadsigns and displays them on the instrument panel.As you approach it, the symbol of thecorresponding sign is displayed on theinstrument panel.The actual road signs always take priorityover those displayed by the system.The signs must comply with the ViennaConvention on road signs.Activation/DeactivationIt is configured in the ADAS touchscreen application.Speed limiterFor more information, refer to the Generalrecommendations on the use of drivingand manoeuvring aids.This system prevents the vehiclefrom exceeding the speed program-med by the driver (speed setting).The speed limiter is switched on manually.The minimum speed setting is 19 mph (30 km/h).The speed setting remains in the systemmemory when the ignition is switched off.Steering-mounted controls1.Speed limiter selection2.Switch on/Pause the speed limiter at thepreviously saved speed setting3.Increase the speed setting4.Decrease the speed setting5.Activate the speed limiter at the previouslysaved speed settingUse the speed suggested by the Roadsigns recognition functionFor more information on the Road signsrecognition function, refer to the correspondingsection.Driving132
Information displayed onthe instrument panel6.Speed limiter mode selection indication7.Speed limiter on (green)/Pause (grey)indication8.Speed setting value9.Speed suggested by the Road signsrecognition function (depending on version)Switching on/Pausing►Press 1-LIMIT to select the speed limitermode; the function is paused (grey).►If the limit speed setting is suitable (mostrecent speed setting programmed in thesystem), press 2-II> or 5-OK to switch thespeed limiter on (green).►Pressing 2-II> again temporarily pauses thefunction.When the speed setting remains below thevehicle's speed for a prolonged period oftime, an audible warning is emitted.Adjusting the speed settingYou do not have to switch the speed limiter on inorder to set the speed.To change the speed setting using the vehicle’scurrent speed:►For steps of +/- 1 mph (1 km/h), makesuccessive short presses on 3 to increase oron 4 to decrease.►For steps of +/- 5 mph (5 km/h), press andhold on 3 to increase or on 4 to decrease.When the function is activated, the limitspeed value can be changed using the speedsuggested by the Road signs recognitionfunction displayed on the instrument panel:– When passing the sign:►Press 5-OK to save the suggested speed.This value is then immediately shown as the newspeed setting on the instrument panel.– After passing the sign:►Press 5-OK. The message "OK?" isdisplayed to confirm the request to save.►Press 5-OK again to save the suggestedspeed. The new speed setting value isdisplayed on the instrument panel.Temporarily exceeding thespeed setting►Fully depress the accelerator pedal.The speed limiter is temporarily deactivated andthe displayed speed setting flashes.►Release the accelerator pedal to return tobelow the speed setting.When exceeding the speed is not due to thedriver's action (e.g. in case of a steep slope), anaudible signal is triggered immediately.On a steep descent or in the event of6 sharp acceleration, the speed limiterwill not be able to prevent the vehicle fromexceeding the speed setting.If necessary, apply the brakes to control yourvehicle’s speed.When the vehicle speed returns to the speedsetting level, the speed limiter operates again:the speed setting display becomes fixed again.Off►Press 1-LIMIT: the speed limiter informationdisplay disappears.MalfunctionIn the event of a malfunction, dashes aredisplayed flashing and then fixed instead of thespeed setting.Have it checked by a PEUGEOT dealer or aqualified workshop.Driving1336
Cruise control - SpecificrecommendationsThe cruise control function does notguarantee compliance with the maximumauthorised speed and the safety distancebetween vehicles, the driver remainsresponsible for their driving.In the interest of public safety, only use cruisecontrol if the traffic conditions enable vehiclesto drive at a steady speed and maintain anadequate safety distance.Remain vigilant while cruise control isactivated. If you press and hold one ofthe speed setting modification buttons, yourvehicle may change speed very abruptly.When descending a steep hill, the cruisecontrol system cannot prevent the vehiclefrom exceeding the set speed. Brake ifnecessary to control the vehicle speed.On steep climbs or when towing, the setspeed may not be reached or maintained.Exceeding the programmed speedsettingYou can temporarily exceed the speedsetting by pressing the accelerator pedal (theprogrammed speed flashes).To return to the speed setting, release theaccelerator pedal (when the set speed isreached again, the displayed speed stopsflashing).Operating limitsNever use the system in the followingsituations:– In an urban area with the risk of pedestrianscrossing the road.– In heavy traffic (except versions with theStop & Go function).– On winding or steep roads.– On slippery or flooded roads.– In poor weather conditions.– In the event of restricted visibility for thedriver.– Driving on a speed circuit.– Driving on a rolling road.– When using a ‘space-saver’ type sparewheel.– When using snow chains or non-slip covers.Cruise controlFor more information, refer to the Generalrecommendations on the use of drivingand manoeuvring aids and the Specificrecommendations on cruise control.This system automatically maintainsthe vehicle’s speed at the value pro-grammed by the driver (speed set-ting), without the use of the accelera-tor pedal.Cruise control is switched on manually.It requires a minimum vehicle speed of 25 mph(40 km/h).With an automatic gearbox, mode D or secondgear or higher in mode M must be engaged.With a drive selector, mode Dor B must beengaged.Cruise control remains active afterchanging gear, regardless of the gearboxtype, on engines fitted with the Stop & Startfunction.Switching off the ignition cancels anyspeed setting.Steering-mounted controls1.Cruise control selection2.Switch on/Pause cruise control at thepreviously saved speed setting3.Increase the speed setting (if cruise controlactivated) Activation of cruise control inprogress (if cruise control deactivated)4.Decrease the speed setting (if cruisecontrol activated) Activation of cruisecontrol in progress (if cruise controldeactivated)Driving134
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131