Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 5008 2024- 2025 Owner's Manual Driving Drive selector (Electric)

Major malfunctionThis warning lamp comes on, accom-panied by the display of a message.You must stop the vehicle.Stop as soon as it is safe to do so andswitch off the ignition.Contact a PEUGEOT dealer or a qualifiedworkshop.Drive selector (Electric)The drive selector is a pulse selector witha regenerative braking function for electricvehicles.The drive selector provides traction controlbased on the driving style, the road profile andthe vehicle load.It also manages engine braking when theaccelerator pedal is released.P.ParkButton for parking the vehicle: the frontwheels are locked (the button lights up toindicate that it is activated).R.ReverseTo engage reverse gear, with the foot onthe brake pedal.N.NeutralTo move the vehicle with the ignition offand so allow it to free-wheel.For more information on Free-wheeling,refer to the corresponding section.D.Drive (automatic forward gear) with anintegrated regenerative braking functionSteering-mounted controlsWith the brake level selection, thesteeringmounted control paddles are used tochange the deceleration level.►Pull the "+" or "-" paddle towards you andrelease to decrease or increase deceleration,respectively.Information displayed onthe instrument panelWhen the ignition is switched on, the driveselector status is displayed on the instrumentpanel:P: ParkR: Reverse.N: Neutral.D: Drive (automatic forward gear) withregenerative braking function.Operation►In mode N,with your foot on the brake pedal,push without passing the point of resistance:• Forwards, mode R is selected.• Backwards, mode D is selected.Release the selector fully after each push; itwill then return to its initial position.Special casesTo avoid mode N (quick change from D to R andback again):►In mode R, push backwards past the point ofresistance, mode D is selected.►In mode D, push forwards past the point ofresistance, mode R is selected.►To return to mode N, push without passingthe point of resistance.Driving118
Regenerative brakingWith the Brake level function and whendeceleratingThe Brake level function emulates enginebraking with three deceleration levels, slowingthe vehicle with no need to depress the brakepedal. The vehicle slows more quickly when thedriver releases the accelerator pedal.The energy recovered when the acceleratorpedal is released is then used to partiallyrecharge the traction battery, thereby increasingthe vehicle's driving range.The resulting deceleration of the vehicledoes not cause the brake lamps to comeon.►From mode D, use the control paddles todecrease or increase the deceleration.For each level of deceleration, the informationappears on the dashboard in the form of one ormany more "down" arrows close to D.The deceleration level is not saved when theignition is switched off.If the function does not work, a message isdisplayed on the dashboard.In some situations (e.g. battery full,extreme temperatures), the amount ofregenerative braking may be temporarilylimited, resulting in less deceleration.The driver must remain alert to trafficconditions and must always be ready to usethe brake pedal.With the brake pedalWhen the brake pedal is depressed, theintelligent braking system automatically recoverssome of the energy and uses it to recharge thetraction battery.This energy recovery also reduces use of thebrake pads, thereby limiting their wear.The driver may experience a differentsensation when depressing the brakepedal compared to a vehicle withoutregenerative braking.Driving modesThe driving modes available depend on theengine and equipment of the vehicle.Driving modes are selected using the followingcontrol:►Press the control to display the modes on thetouch screen.►Select the desired driving mode on the leftside of the window.►Close the window by clicking the cross.With an electric vehicle, when starting thevehicle, no mode can be selected until theREADY indicator lamp is displayed.When the message disappears, the selectedmode is activated and remains indicated on theinstrument panel (except Normal mode).The selected mode is activated immediately.With the Advanced Grip Control system,additional driving modes are available.For more information on Advanced GripControl, refer to the corresponding section.Driving1196
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131