Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 5008 2009-2016 Owner's Manual Visibility Lighting controls

Visibility825008_en_Chap04_visibilite_ed01-2015Lighting controlsMain lightingThe various front and rear lamps of the vehicle are designed to adapt the lighting progressively in relation to the climatic conditions and so improve the driver's visibility:-sidelamps, to be seen,-dipped beam headlamps to see without dazzling other drivers,-main beam headlamps to see clearly when the road is clear,-directional headlamps for improved visibility when cornering.Additional lightingOther lamps are installed to fulfil the requirements of particular driving conditions:-a rear foglamp to be seen from a distance,-front foglamps for even better visibility,-daytime running lamps to be seen during the day.Function settingsYou can activate / deactivate the following lighting functions:-automatic guide-me-home lighting,-automatic illumination of headlamps,-directional lighting.Travelling abroadIf using your vehicle in a country that drives on the other side of the road, the headlamps must be adjusted to avoid dazzling on-coming drivers.Contact an official dealer or a qualified workshop.In some weather conditions (e.g. low temperature or humidity), the presence of misting on the internal surface of the glass of the headlamps and rear lamps is normal; it disappears after the lamps have been on for a few minutes.
4Visibility835008_en_Chap04_visibilite_ed01-2015Model without AUTO lightingModel with AUTO lightingThe lighting is controlled directly by the driver by means of the ring A and the stalk B.B.Stalk for switching headlamps: pull the stalk towards you to switch the lighting between dipped and main beam headlamps.In the lamps off and sidelamps modes, the driver can switch on the main beam headlamps temporarily ("headlamp flash") by maintaining a pull on the stalk.Automatic illumination of headlamps.Lighting off (ignition off) /Daytime running lamps (engine running).Sidelamps.Dipped headlamps or main beam headlamps.DisplaysIllumination of the corresponding indicator lamp in the instrument panel confirms that the lighting selected is on.Manual controlsA.Main lighting mode selection ring: turn it to position the symbol required facing the mark.
Visibility845008_en_Chap04_visibilite_ed01-2015Model with rear foglamp onlyRear foglampThis operates with dipped and main beam headlamps.FTo switch on the foglamp, turn the ring Cforwards.FTo switch off the foglamp, turn the ring Crearwards.When the lighting is switched on automatically (with AUTO model), the dipped beam headlamps and sidelamps remain on until the rear foglamp is switched off.Model with front and rear foglampsFront and rear foglampsThe rear foglamp operates with the dipped and main beam headlamps.The front foglamps also operate with the sidelamps.FTo switch on the front foglamps, turn thering C forwards.FTo switch on the rear foglamp, turn theringC forwards again.FTo switch off the rear foglamp, turn theringC rearwards.FTo switch off the front foglamps, turn thering C rearwards again.When the lighting is switched on automatically (with AUTO model), the dipped beam headlamps and sidelamps remain on until the rear foglamp is switched off.When the lighting is switched off automatically (with AUTO model) or when the dipped beam headlamps are switched off manually, the foglamps and the sidelamps will remain on.C.Foglamp selection ring.
4Visibility855008_en_Chap04_visibilite_ed01-2015Switching off the lighting when switching off the ignitionWhen the ignition is switched off, all of the lamps switch off immediately, except for the dipped beam headlamps if automatic guide-me-home lighting is activated.In good or rainy weather, by both day and night, the front foglamps and the rear foglamps are prohibited. In these situations, the power of their beams may dazzle other drivers. They should only be used in fog or falling snow.In these weather conditions, you should switch on the foglamps and dipped beam headlamps manually, as the sunshine sensor may detect sufficient light.Do not forget to switch off the front and rear foglamps when they are no longer necessary.Switching on the lighting when switching on the ignitionTo reactivate the lighting control stalk, turn the ring A to position "0" - lighting off, then to the position of your choice.If the lighting is switched on manually after switching off the ignition, there is an audible signal when a front door is opened to warn the driver that they have forgotten to switch off the vehicle's lighting, with the ignition off.They switch off automatically after a period which depends on the state of charge of the battery (entry to energy economy mode).
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131