Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 5008 2009-2016 Owner's Manual Visibility

Visibility825008_en_Chap04_visibilite_ed01-2015Lighting controlsMain lightingThe various front and rear lamps of the vehicle are designed to adapt the lighting progressively in relation to the climatic conditions and so improve the driver's visibility:-sidelamps, to be seen,-dipped beam headlamps to see without dazzling other drivers,-main beam headlamps to see clearly when the road is clear,-directional headlamps for improved visibility when cornering.Additional lightingOther lamps are installed to fulfil the requirements of particular driving conditions:-a rear foglamp to be seen from a distance,-front foglamps for even better visibility,-daytime running lamps to be seen during the day.Function settingsYou can activate / deactivate the following lighting functions:-automatic guide-me-home lighting,-automatic illumination of headlamps,-directional lighting.Travelling abroadIf using your vehicle in a country that drives on the other side of the road, the headlamps must be adjusted to avoid dazzling on-coming drivers.Contact an official dealer or a qualified workshop.In some weather conditions (e.g. low temperature or humidity), the presence of misting on the internal surface of the glass of the headlamps and rear lamps is normal; it disappears after the lamps have been on for a few minutes.
4Visibility835008_en_Chap04_visibilite_ed01-2015Model without AUTO lightingModel with AUTO lightingThe lighting is controlled directly by the driver by means of the ring A and the stalk B.B.Stalk for switching headlamps: pull the stalk towards you to switch the lighting between dipped and main beam headlamps.In the lamps off and sidelamps modes, the driver can switch on the main beam headlamps temporarily ("headlamp flash") by maintaining a pull on the stalk.Automatic illumination of headlamps.Lighting off (ignition off) /Daytime running lamps (engine running).Sidelamps.Dipped headlamps or main beam headlamps.DisplaysIllumination of the corresponding indicator lamp in the instrument panel confirms that the lighting selected is on.Manual controlsA.Main lighting mode selection ring: turn it to position the symbol required facing the mark.
Visibility845008_en_Chap04_visibilite_ed01-2015Model with rear foglamp onlyRear foglampThis operates with dipped and main beam headlamps.FTo switch on the foglamp, turn the ring Cforwards.FTo switch off the foglamp, turn the ring Crearwards.When the lighting is switched on automatically (with AUTO model), the dipped beam headlamps and sidelamps remain on until the rear foglamp is switched off.Model with front and rear foglampsFront and rear foglampsThe rear foglamp operates with the dipped and main beam headlamps.The front foglamps also operate with the sidelamps.FTo switch on the front foglamps, turn thering C forwards.FTo switch on the rear foglamp, turn theringC forwards again.FTo switch off the rear foglamp, turn theringC rearwards.FTo switch off the front foglamps, turn thering C rearwards again.When the lighting is switched on automatically (with AUTO model), the dipped beam headlamps and sidelamps remain on until the rear foglamp is switched off.When the lighting is switched off automatically (with AUTO model) or when the dipped beam headlamps are switched off manually, the foglamps and the sidelamps will remain on.C.Foglamp selection ring.
4Visibility855008_en_Chap04_visibilite_ed01-2015Switching off the lighting when switching off the ignitionWhen the ignition is switched off, all of the lamps switch off immediately, except for the dipped beam headlamps if automatic guide-me-home lighting is activated.In good or rainy weather, by both day and night, the front foglamps and the rear foglamps are prohibited. In these situations, the power of their beams may dazzle other drivers. They should only be used in fog or falling snow.In these weather conditions, you should switch on the foglamps and dipped beam headlamps manually, as the sunshine sensor may detect sufficient light.Do not forget to switch off the front and rear foglamps when they are no longer necessary.Switching on the lighting when switching on the ignitionTo reactivate the lighting control stalk, turn the ring A to position "0" - lighting off, then to the position of your choice.If the lighting is switched on manually after switching off the ignition, there is an audible signal when a front door is opened to warn the driver that they have forgotten to switch off the vehicle's lighting, with the ignition off.They switch off automatically after a period which depends on the state of charge of the battery (entry to energy economy mode).
Visibility865008_en_Chap04_visibilite_ed01-2015Manual guide-me-home lightingThe temporary illumination of the dipped beam headlamps after the vehicle's ignition has been switched off makes the driver's exit easier when the light is poor.Switching onFWith the ignition off, "flash" the headlamps using the lighting stalk.FA further "headlamp flash" switches the function off.Switching offThe manual guide-me-home lighting switches off automatically after a set time.Front daytime running lamps (light-emitting diodes)They come on automatically when the engine is started, when the lighting control stalk is in position "0" or "AUTO".Switching onSwitching offThe exterior welcome lighting switches off automatically when the ignition is switched on or on locking the vehicle again.FPress the open padlock on the remote control.The dipped beam headlamps and the sidelamps come on; your vehicle is also unlocked.Exterior welcome lightingThe remote switching on of the lighting makes your approach to the vehicle easier in poor light. It is activated according to the level of light detected by the sunshine sensor.The duration of the welcome lighting is identical to that of the automatic guide-me-home lighting.
4Visibility875008_en_Chap04_visibilite_ed01-2015Automatic illumination of headlampsFTurn the ring to the "AUTO" position. The activation of the function is accompanied by the display of a message in the screen.DeactivationFTurn the ring to another position. Deactivation of the function is accompanied by the display of a message in the screen.Operating faultIn the event of a malfunction of the sunshine sensor, the lighting comes on, this warning lamp is displayed in the instrument panel and/or a message appears in the screen, accompanied by an audible signal.Contact a PEUGEOT dealer or a qualified workshop.Automatic guide-me-home lightingWhen the automatic illumination of headlamps function is activated (lighting control stalk in the "AUTO" position), under low ambient light the dipped beam headlamps remain on when the ignition is switched off.In fog or snow, the sunshine sensor may detect sufficient light. In this case, the lighting will not come on automatically.Do not cover the sunshine sensor, coupled with the rain sensor and located in the centre of the windscreen behind the rear view mirror; the associated functions would no longer be controlled.When a low level of ambient light is detected by a sunshine sensor, the number plate lamps, sidelamps and dipped beam headlamps are switched on automatically, without any action on the part of the driver. They can also come on if rain is detected, at the same time as automatic operation of the windscreen wipers.As soon as the ambient light returns to a sufficient level or after the windscreen wipers are switched off, the lamps are switched off automatically.ActivationProgrammingActivation or deactivation, as well as the duration of the guide-me-home lighting, is set in the vehicle configuration menu.
Visibility885008_en_Chap04_visibilite_ed01-2015Exterior welcome lightingThe remote switching on of the lighting makes your approach to the vehicle easier in poor light. It is activated according to the level of light detected by the sunshine sensor.Switching onThe duration of the welcome lighting is identical to that of the automatic guide-me-home lighting.FPress the open padlock on the remote control.The dipped beam headlamps and the sidelamps come on; your vehicle is also unlocked.Switching offThe exterior welcome lighting switches off automatically when the ignition is switched on or on locking the vehicle again.
4Visibility895008_en_Chap04_visibilite_ed01-2015Manual beam adjustment of halogen headlampsTo avoid causing a nuisance to other road users, the beam height of the halogen headlamps should be adjusted according to the load in the vehicle.0.1 or 2 people in the front seats.-.3 people.1.5 people.-.Intermediate setting.2.5 people + maximum authorised load.-.Intermediate setting.3.Driver + maximum authorised load.Automatic beam adjustment with xenon headlampsIn order to avoid causing a nuisance to other road users, this system corrects the height of the xenon headlamps beam automatically and when stationary, according to the load in the vehicle.If a fault occurs, this warning lamp is displayed on the instrument panel, accompanied by an audible signal and a message in the multifunction screen.The system then places your headlamps in the lowest position.If a fault occurs, do not touch the xenon bulbs. Contact a PEUGEOT dealer or a qualified workshop.The initial setting is position "0".
Visibility905008_en_Chap04_visibilite_ed01-2015Directional lightingWith directional lightingWithout directional lightingProgrammingOperating faultThe system is activated or deactivated via the vehicle configuration menu.If a fault occurs, this warning lamp flashes in the instrument panel, accompanied by a message in the screen.Contact a PEUGEOT dealer or a qualified workshop.This system is linked to the presence of xenon headlamps.When the main or dipped beam headlamps are on, this system illuminates the inside of bends (from12 mph - 20 km/h).The state of the system remains in memory when the ignition is switched off.
4Visibility915008_en_Chap04_visibilite_ed01-2015Wiper controlsModel with intermittent wipingModel with AUTO wipingProgrammingYou can modify the settings for the following functions:-automatic rain sensitive windscreen wipers,-rear wiping on engaging reverse gear.The vehicle's front and rear wipers are designed to improve the driver's visibility progressively according to the weather conditions.Manual controlsWindscreen wipersA. Wiping speed selection stalk.Fast (heavy rain).Normal (moderate rain).Intermittent (proportional to the speed of the vehicle).Automatic, then single wipe.Refer to the corresponding section.Off.Single wipe (press down and release).or
Visibility925008_en_Chap04_visibilite_ed01-2015Rear wiperB. Rear wiper selection ring:Park.Intermittent wipe.Wash-wipe (set duration).Reverse gearWhen reverse gear is engaged, the rear wiper will come into operation automatically if the windscreen wipers are on.ProgrammingSwitching the automatic operation of the rear wiper in reverse on or off is done via the vehicle configuration menu.This function is activated by default.If a significant accumulation of snow or ice is present, or when using a bicycle carrier on the boot, remember to deactivate the automatic rear wiper.
4Visibility935008_en_Chap04_visibilite_ed01-2015Windscreen washPull the wiper stalk towards you. Thewindscreen wash then the wipers operate for a set time.The headlamp wash is also activated if the dipped beam headlamps are on.Screenwash/headlamp wash low levelIn the case of vehicles fitted with headlamp washers, when the minimum level of the reservoir is reached, this warning lamp is displayed in the instrument panel, accompanied by an audible signal and a message.The warning lamp is displayed when the ignition is switched on, or every time the stalk is operated, until the reservoir is refilled.Next time you stop, refill the screenwash / headlamp wash reservoir.Headlamp washPress the end of the lighting stalk to activate the headlamp wash, when the dipped beam headlamps are on.
Visibility945008_en_Chap04_visibilite_ed01-2015Automatic rain sensitive windscreen wipersThe windscreen wipers operate automatically, without any action on the part of the driver, if rain is detected (sensor behind the rear view mirror), adapting their speed to the intensity of the rainfall.ActivationThis is controlled manually by the driver by pushing the stalk downwards to the "AUTO"position.It is accompanied by a message in the screen.Switching offThis is controlled manually by the driver by moving the stalk upwards then returning it to position "0".It is accompanied by a message in the screen.Operating faultIf an automatic wiping malfunction occurs, the wipers will operate in intermittent mode.Have it checked by a PEUGEOT dealer or a qualified workshop.Do not cover the rain sensor, linked with the sunshine sensor and located in the centre of the windscreen behind the rear view mirror.Switch off the automatic rain sensitive wipers when using an automatic car wash.In winter, to avoid damaging the wiper blades, it is advisable to wait until the windscreen is completely clear of ice before activating the automatic rain sensitive wipers.The automatic rain sensitive wipers must be reactivated if the ignition has been off for more than one minute, by pushing the stalk downwards.
4Visibility955008_en_Chap04_visibilite_ed01-2015Special position of the windscreen wipersThis position permits release of the windscreen wiper blades.It is used for cleaning or replacement of the blades. It can also be useful, in winter, to detach the blades from the windscreen.FAny action on the wiper stalk in the minute after switching off the ignition places the blades vertically on the screen.FTo park the blades again, switch on the ignition and operate the wiper stalk.To maintain the effectiveness of the flat wiper blades, it is advisable to:-handle them with care,-clean them regularly using soapy water,-avoid using them to retain cardboard on the windscreen,-replace them at the first signs of wear.
Visibility965008_en_Chap04_visibilite_ed01-2015Courtesy lamps1.Front courtesy lamp2.Map reading lampsMap reading lampsFront and rear courtesy lampsIn this position, the courtesy lamp comes on gradually:-when the vehicle is unlocked,-when the key is removed from the ignition,-when a door is opened,-when the remote control locking button is activated, in order to locate your vehicle.Permanently off.Permanent lighting.It switches off gradually:-when the vehicle is locked,-when the ignition is switched on,-30 seconds after the last door is closed.3.Rear courtesy lampTake care not to place anything in contact with the courtesy lamps.With the "permanent lighting" mode, the lighting time varies according to the circumstances:-with the ignition off, approximately ten minutes,-in energy economy mode, approximately thirty seconds,-with the engine running, unlimited.FWith the ignition on, press the corresponding switch.
4Visibility975008_en_Chap04_visibilite_ed01-2015Interior mood lightingSwitching onAt night, the mood lamp in the front courtesy lamp comes on automatically when the sidelamps are switched on.Switching offThe interior mood lighting switches off automatically when the sidelamps are switched off.Door mirror spotlampsTo make your approach to the vehicle easier, these illuminate:-the zones facing the driver’s and passenger’s doors,-the zones forward of the door mirrors and rearward of the front doors.Switching onThe spotlamps come on:-when you unlock the vehicle,-when you remove the key from the ignition,-when you open a door,-when you use the remote control.Switching offThey are timed to go off automatically.The dimmed passenger compartment lighting improves visibility in the vehicle when the light is poor.Footwell lightingSwitching onThe soft lighting provided by the footwell lamps improves visibility in the vehicle when the light is poor.Its operation is identical to that of the courtesy lamps. The lamps come on when one of the doors is opened.
Visibility985008_en_Chap04_visibilite_ed01-2015This comes on automatically when the boot is opened and switches off automatically when the boot is closed.Boot lampDifferent lighting times are available:-when the ignition is off, approximately ten minutes,-in energy economy mode, approximately thirty seconds,-when the engine is running, nolimit.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131