Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 5008 2009-2016 Owner's Manual Practical information Changing a bulb

10Practical information2315008_en_Chap10_infos-pratiques_ed01-2015Changing a bulbModel with halogen headlamps1.Direction indicators(light-emitting diodes - LEDs).2.Main beam headlamps (HB3).3.Dipped beam headlamps (H7).4.Daytime running lamps/sidelamps(light-emitting diodes - LEDs).5.Foglamps (PS24W).1.Direction indicators (light-emitting diodes - LEDs).2.Dipped / main beam directional headlamps (D1S).3.Daytime running lamps / sidelamps (light-emitting diodes - LEDs).4.Foglamps (PS24W).Model with xenon and directional headlampsFront lampsThe headlamps are fitted with polycarbonate glass with a protective coating:Fdo not clean them using a dry or abrasive cloth, nor with a detergent or solvent product,Fuse a sponge and soapy water or a pH neutral product,Fwhen using a high pressure washer on persistent marks, do not keep the lance directed towards the lamps or their edges for too long, so as not to damage their protective coating and seals.Changing a bulb should only be done after the headlamp has been switched off for several minutes (risk of serious burns).FDo not touch the bulb directly with your fingers, use a lint-free cloth.It is imperative to use only anti-ultraviolet (UV) type bulbs to avoid damaging the headlamp.Always replace a failed bulb with a new bulb with the same type and specification.Risk of electrocutionXenon bulbs (D1S) must be replaced by a PEUGEOT dealer or a qualified workshop.
Practical information2325008_en_Chap10_infos-pratiques_ed01-2015Changing main beam headlamp bulbs(model with halogen headlamps)Changing dipped beam headlamp bulbs (models with halogen headlamps)FRemove the protective plastic cover by pulling the tab.FDisconnect the bulb connector.FExtract the bulb by pulling and change it.To refit, carry out these operations in reverse order.FRemove the protective plastic cover by pulling the tab.FWithout disconnecting the connector, turn the body of the bulb a quarter of a turn to the left to disengage the assembly.FDisconnect the connector to release the bulb.To refit, carry out these operations in reverse order.Changing direction indicators and daytime running lamps / sidelampsFor the replacement of these LED (light-emitting diode) lamps, contact a PEUGEOT dealer or a qualified workshop.
10Practical information2335008_en_Chap10_infos-pratiques_ed01-2015Changing foglamp bulbsContact a PEUGEOT dealer or a qualified workshop.FInsert a screwdriver towards the centre of the repeater between the repeater and the base of the mirror.FTilt the screwdriver to extract the repeater and remove it.FDisconnect the repeater connector.Changing integrated direction indicator side repeatersChanging dipped beam and main beam headlamp bulbs (models with xenon headlamps)D1S xenon bulbs must be changed by a PEUGEOT dealer or a qualified workshop as there is a risk of electrocution.It is recommended that all D1S bulbs are changed at the same time if one of them fails.You can also contact a PEUGEOT dealer or a qualified workshop to have these lamps changed.To refit, carry out these operations in reverse order.Contact a PEUGEOT dealer or a qualified workshop to obtain a new repeater.
Practical information2345008_en_Chap10_infos-pratiques_ed01-2015Rear lamps1.Direction indicators(PY21W-21W).2.Brake lamps(P21W-21W).3.Sidelamps(LEDs).4.Reversing lamp(P21W).5.Foglamp(P21W).FRemove the two lamp unit fixing nuts.FPull the lamp rearwards (a positioning lug retains the lamp).FDisconnect the lamp connector.FPress the four tabs and remove the bulb holder.Changing brake lamp and direction indicator bulbs
10Practical information2355008_en_Chap10_infos-pratiques_ed01-2015FTurn the bulb a quarter of a turn and change it.To refit, carry out these operations in reverse order.For the replacement of this type of LED lamp, contact a PEUGEOT dealer or a qualified workshop.FReach under the bumper.FTurn the bulb a quarter of a turn and change it.Changing sidelamps (LEDs)Changing foglamp or reversing lamp bulbs
Practical information2365008_en_Chap10_infos-pratiques_ed01-2015FPress the pairs of clips A then B then C to detach the bulb holders.FOpen the boot and remove the upper tailgate seal.FRemove the centre tailgate trim.FUnscrew the two nuts using a 10mm spanner.FPress the threaded pins while supporting the lamp from the outside.FClose the tailgate.FDisconnect the lamp connector then the screenwash pipe to remove the lens.Changing the third brake lamp bulb(5W5)FInsert a thin screwdriver into one of the outer holes of the lens.FPush it outwards to unclip.FRemove the lens.FPull the bulb out and change it.Changing the number plate lamp bulbs (W5W)
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131