Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 5008 2009-2016 Owner's Manual Fittings

5Fittings995008_en_Chap05_amenagements_ed01-2015Interior fittings1.Sun visor2.Grab handle with coat hook3.Storage compartment4.Storage compartment under thesteering wheel5.Storage compartment6.Illuminated glove box7.Door pockets8.Front 12 V accessory socket (120 W)9.Storage compartment10.PEUGEOT Connect USB11.Cup holder12.Rear 12 V accessory socket (120 W)
Fittings1005008_en_Chap05_amenagements_ed01-2015Driver's storage compartmentsStorage boxThis has storage areas for the handbook pack,...FTo open, pull the handle then tilt the box.Illuminated glove boxThis has storage areas, audio sockets for a portable player,...FTo open the glove box, raise the handle.The lamp comes on when the lid is opened.Sun visorComponent which protects against sunlight from the front or the side, also equipped with an illuminated courtesy mirror.FWith the ignition on, raise the concealing flap; the mirror is illuminated automatically.This sun visor is also equipped with a ticket holder.Card holderThis can be used for a toll payment ticket or parking card, for example.Coin storageStorageTo connect a portable player refer to the "Audio equipment and telematics" section.
5Fittings1015008_en_Chap05_amenagements_ed01-2015Centre consoleStorageFSlide the cover for access to the 10.5 litre storage compartment.This can hold 2 half-litre bottles.A ventilation outlet delivers cooled air.PEUGEOT Connect USBThis connection unit consists of a JACK auxiliary socket and/or a USB port.It permits the connection of a portable device, such as a digital audio player of the iPod® type or a USB memory stick.It reads the audio file formats (mp3, ogg, wma, wav...) which are transmitted to your audio system and played via the vehicle's speakers.You can manage these files using the steering mounted controls or the audio system control panel and display them in the multifunction screen.Connected to the USB port, the portable device charges automatically.While charging, a message is displayed if the current consumption by the portable device exceeds the power rating of the port.For more information on the use of this equipment, refer to the "Audio equipment and telematics" section.Storage space for the driver and front passenger.
Fittings1025008_en_Chap05_amenagements_ed01-2015MatsRefittingTo refit the mat on the driver's side:Fposition the mat correctly,Frefit the fixings by pressing,Fcheck that the mat is secured correctly.FittingWhen fitting the mat for the first time, on the driver's side use only the fixings provided in the wallet attached.The other mats are simply placed on the carpet.RemovalTo remove the mat on the driver's side:Fmove the seat as far back as possible,Funclip the fixings,Fremove the mat.12 V accessory socketsFTo connect a 12 V accessory (max power: 120 Watts), remove the cover and connect a suitable adaptor.Exceeding the maximum power could result in damage to your accessory.Removable carpet protection.To avoid any risk of jamming of the pedals:-only use mats which are suited to the fixings already present in the vehicle; these fixings must be used,-never fit one mat on top of another.The use of mats not approved by PEUGEOT may interfere with access to the pedals and hinder the operation of the cruise control / speed limiter.The mats approved by PEUGEOT have two fixings located below the seat.The connection of an electrical device not approved by PEUGEOT, such as a USB charger, may adversely affect the operation of vehicle electrical systems, causing faults such as poor telephone reception or interference with displays in the screens.
5Fittings1035008_en_Chap05_amenagements_ed01-2015Storage compartments under the rear footwellsDepending on the configuration, the vehicle has storage compartments under the footwells, located forward of the outer rear seats. Access is via clipped flaps with a handle A."Aircraft" type tablesInstalled on the back of each front seat, these allow you to set down objects.FTo use the table, lower it fully until it locks in the low position.FTo store the table, raise it, passing the point of resistance, to the high position.On the passenger side, do not forget to fold the "aircraft" type table before placing the seat in the table position.Do not place hard or heavy objects on the table. They could become dangerous projectiles in the event of emergency braking or impact.Storage drawerOpeningFRaise the front of the drawer and pull it.Do not place heavy objects in the drawers.It is located under the driver's seat (manual adjustment).
Fittings1045008_en_Chap05_amenagements_ed01-2015Rear multimediaThis multimedia system allows rear passengers to connect one or two external portable systems (audio or video player, games consoles, DVD player...). The sound is played through two Bluetooth® wireless headphone sets, while the video content is displayed in two 7-inch screens built into the backs of the front seat head restraints.DescriptionThis system operates only with the engine running.The pack includes:-the connection and control panel fitted on the rear face of the centre console,-two 7-inch screens built into the front head restraints (with protective covers),-two wireless Bluetooth technology headphone sets with rechargeable batteries,-a 12 V charger with two outlets allowing the simultaneous charging of two headphones.1.Power switch2.AV1 video input (yellow RCA socket)3.Stereo audio input A (red and white RCAsockets)4.AV2 video input (yellow RCA socket)5.Stereo audio input B (red and white RCAsockets)6.Selection of display in the left hand screen (AV1 or AV2)7.Selection of display in the right hand screen (AV1 or AV2)8.Connection indicator lamps for the Bluetooth audio headphones (blue)
5Fittings1055008_en_Chap05_amenagements_ed01-20151.Screen power switch2.Display adjustment buttonsEach headphone set has a switch, a connection indicator lamp (blue) and a channel selector (A or B).OperationFWith the engine running, connect your portable system to the RCA connectors (e.g. with AV1 on the left).FPress the switch on the control panel, the indicator lamp comes on and the AV1 indicator lamps come on.FMake a long press on the switch, its indicator lamp flashes in blue.FMake a long press on the control panel switch, the pairing with the headphone set is complete when the blue indicator lamps on the headphones and on the system are on continuously.FRepeat the operation for the other headphone set.FPress the screen switch if you have a video source.FStart playing your portable system.FIt is possible at any time to modify the source for the video display (using button6 or 7 on the control panel: the indicator lamp for the source selected comes on) as well as the audio channel (using the selector on the headphones).The Multimedia system allows the connection of a third Bluetooth headphone set, not supplied.If your seat is in the table position, position a cover to avoid damaging the screen.These covers also conceal each screen.
Fittings1065008_en_Chap05_amenagements_ed01-2015Panoramic sunroofMotorised blindIt has a blind that can be used to improve temperature and noise related comfort in the passenger compartment.With button B:-press at the top to open the blind,-press at the bottom to close the blind.With button A:-pull the control to open the blind,-push the control to close the blind.Depending on version, the blind is opened and closed using:-button A on the centre console,-or button B on the dashboard.Manual modeMaintaining pressure on the control opens or closes the blind: movement stops if you release the control. Pressure on the control in the opposite direction reverses the movement.The control is operational with the ignition on and for 45 seconds after switching off the ignition.
5Fittings1075008_en_Chap05_amenagements_ed01-2015Automatic modePressing and releasing the control opens or closes the blind completely. Pressing again stops the movement.Safety anti-pinchIn automatic mode and at the end of its travel, if the blind meets an obstacle while closing it stops and moves back slightly.Reinitialisation: after reconnecting the battery or in the event of a fault while the blind is moving, it may be necessary to reinitialise the system:FOperate the control until the blind is fully closed or open.FContinue to press for at least 3 seconds. A slight movement of the blind will then be noticeable, confirming the reinitialisation.If the blind opens on its own while closing, and immediately after it stops.FOperate the control until the blind is fully open.FOperate the control until the blind is fully closed.The safety anti-pinch function is not operational during these operations.If the blind meets an obstacle during operation, you must reverse the movement of the blind.When the driver operates the blind control, they must ensure that nothing and no one is preventing the correct closing of the blind.The driver must ensure that passengers use the blind correctly.Be aware of children when operating the blind.
Fittings1085008_en_Chap05_amenagements_ed01-2015Boot fittings (5-seat version)1.Load space cover2.Hooks3.12 V accessory socket (120 W)4.Storage compartment under the floor5.Concertina boards6.Stowing rings on the floor7.Cup holder8.Storage compartments or audio amplifier
5Fittings1095008_en_Chap05_amenagements_ed01-20151.Load space cover2.Hooks3.12 V accessory socket (120 W)4.Buckles for the 3rd row seat belts5.Concertina boards6.Stowing rings on the floor7.Cup holder8.Armrests9.Storage compartments or audio amplifierBoot fittings (7-seat version)
Fittings1105008_en_Chap05_amenagements_ed01-2015Roller load space coverTo install the load space cover:Fposition one of the ends of the roller in its support,Finsert the second end in its support,Fpivot the ends of the roller downwards to secure it,Freel out the load space cover to the boot pillars,Finsert the load space screen guides in the rails on the boot pillars.To remove the load space cover:Fremove the load space cover guides from the rails on the boot pillars,Freel in the load space cover in its roller,To store the load space cover, roller uppermost and flap facing towards the inside of the vehicle:Fplace the right-hand end in its housing,Fslide the left-hand end into the guide then into its housing,Fpivot the ends of the roller upwards to release it,Fremove the roller from its support.Fsecure the assembly by pivoting the ends downwards.The roller has two rings for fixing the luggage retaining net depending on its location.If you use the 3rd row seats (7 seat version), it is essential to store the roller in its housing.
5Fittings1115008_en_Chap05_amenagements_ed01-2015High load retaining net*To use it in row 1:Ffold the rear seats,Fopen the covers of the upper fixings 1,Funroll the high load retaining net,Fposition one of the ends of the net's metal bar in the corresponding upper fixing 1, then do the same with the other end,Fslacken the straps fully,Ffix the snap hook of each of the straps on the corresponding Top Tether ring 3(located on the back of the folded rear side seats),Ftighten the straps,Fcheck that the net is hooked and tightened correctly.To use it in row 2:Froll up or remove the load space screen,Fopen the covers of the upper fixings 2,Funroll the high load retaining net,Fposition one of the ends of the net's metal bar in the corresponding upper fixing 2, then do the same with the other end,Ffix the snap hook of each of the straps in the corresponding stowing ring 4,Ftighten the straps,Fcheck that the net is hooked and tightened correctly.Hooked onto the special upper and lower fixings, this permits use of the entire loading volume up to the roof:-behind the front seats (row 1) when the rear seats are folded.-behind the rear seats (row 2).* If your vehicle is equipped with this.When positioning the net, check that the strap loops are visible from the boot; this will make slackening or tightening easier.
Fittings1125008_en_Chap05_amenagements_ed01-2015Luggage retaining netHooked onto the stowing rings on the floor and/or on the load space cover roller, the luggage retaining net available as an accessory enables you to secure your luggage.There are 4 possible positions:-flat at the bottom of the boot,-horizontal, level with the load space cover,-vertical at the back of the rear seats,-flat at the bottom of the boot and vertical at the back of the rear seats.
5Fittings1135008_en_Chap05_amenagements_ed01-2015HooksFTo connect a 12 V accessory (max power: 120 W), remove the cap and connect an appropriate adaptor.FTurn the key to the ignition on position.12 V accessory socketFRaise the concertina board to gain access to the storage box.Depending on the configuration, this has areas for storing:-a box of spare bulbs,-a first aid kit,-a puncture repair kit,-two warning triangles,-...Storage box (5 seat version)The hooks can be used to secure shopping bags.
Fittings1145008_en_Chap05_amenagements_ed01-2015Rear side blindsFitted on the rear windows, these protect your young children from the sun.FPull the blind by the central tab.FPosition the blind attachment on the hook.3rd row (7 seat version)2nd row
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131