Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 5008 2009-2016 Owner's Manual Driving Stop & Start

Driving1805008_en_Chap08_conduite_ed01-2015Stop & StartOperationGoing into engine STOP modeThe "ECO" indicator lamp comes on in the instrument panel and the engine goes into standby:-with a manual gearbox, at speeds below 12 mph (20 km/h), or vehicle stationary with PureTech 130 and BlueHDi 115 and 120 versions, when you put the gear lever into neutral and release the clutch pedal,-with an electronic gearbox, at speeds below 5 mph (8 km/h), when you press the brake pedal or you put the gear selector in position N,Special cases: STOP mode not availableSTOP mode is not invoked when:-the driver's door is open,-the driver's seat belt is not fastened,-the vehicle has not exceeded 6 mph (10 km/h) since the last engine start using the key,-the vehicle is stopped on a steep slope (up or down),-the electric parking brake is applied or being applied,-the engine is needed to maintain a comfortable temperature in the passenger compartment,-demisting is active,-some special conditions (battery charge, engine temperature, braking assistance, ambient temperature...) where the engine is needed to assure control of a system.In this case, the "ECO" indicator lamp flashes for a few seconds then goes off.This operation is perfectly normal.Never refuel with the engine in STOP mode; you must switch off the ignition with the key.For your comfort, during parking maoeuvres, STOP mode is not available for a few seconds after coming out of reverse gear.STOP mode does not affect the functionality of the vehicle, such as for example, braking, power steering...The Stop & Startsystem puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The engine restarts automatically-START mode - as soon as you want to move off. The restart takes place instantly, quickly and silently.Perfect for urban use, the Stop & Start system reduces fuel consumption and exhaust emissions as well as the noise level when stationary.-with an automatic gearbox, vehicle stationary, when you press the brake pedal or you put the gear selector in position N.If your vehicle is fitted with the system, a time counter calculates the sum of the periods in STOP mode during a journey. It rests itself to zero every time the ignition is switched on with the key.
8Driving1815008_en_Chap08_conduite_ed01-2015Going into engine START modeThe "ECO" indicator lamp goes off and the engine starts automatically:-with a manual gearbox, when you fully depress the clutch pedal,-with an electronic gearbox:●gear selector in position A or M, when you release the brake pedal,●or gear selector in position N and brake pedal released, when you put the gear selector in position A or M,●or when you engage reverse gear.-with an automatic gearbox:●gear selector in position D or M, when you release the brake pedal,●or gear selector in position N and brake pedal released, when you put the gear selector in position D or M,●or when you engage reverse gear.In this case the "ECO" indicator lamp flashes for a few seconds, then goes off.Special cases: START invoked automaticallyThis operation is perfectly normal.DeactivationAt any time, press the "ECO OFF"switch to deactivate the system.This is confirmed by the indicator lamp in the switch coming on accompanied by a message in the screen.START mode is invoked automatically when:-the driver's door is open,-the driver's seat belt is not fastened,-the speed of the vehicle exceeds 18 mph (25 km/h) with a manual gearbox, 2mph (3km/h) with the PureTech 130 and BlueHDi 115 and 120 versions, 7 mph (11km/h) with an electronic gearbox or 2mph (3 km/h) with an automatic gearbox,-the electric parking brake is being applied,-some special conditions (battery charge, engine temperature, braking assistance, ambient temperature...) where the engine is needed for control of a system.If the system has been deactivated in STOP mode, the engine restarts immediately.
Driving1825008_en_Chap08_conduite_ed01-2015ReactivationOperating faultIn the event of a fault with the system, the indicator lamp in the "ECO OFF" switch flashes then comes on continuously.Have it checked by a PEUGEOT dealer or a qualified workshop.In the event of a fault in STOP mode, the vehicle may stall: all the instrument panel warning lamps come on. It is then necessary to switch off the ignition and start the engine again using the key.MaintenanceThis system requires a 12 V battery with a special specification and technology (reference numbers available from PEUGEOT dealers).Fitting a battery not listed by PEUGEOTintroduces the risk of malfunction of the system.To charge the battery, use a 12 V charger and observe the polarity.Press the "ECO OFF" switch again.The system is active again; this is confirmed by the indicator lamp in the switch going off and a message in the screen.The system is reactivated automatically at every new start using the key.Before doing anything under the bonnet, deactivate the Stop & Start system to avoid any risk of injury resulting from automatic operation of START mode.The Stop & Start system makes use of advanced technology. For any work on the system go to a qualified workshop with the skills and equipment required, which a PEUGEOT dealer is able to provide.When driving on flooded roads or crossing a ford, switch off the Stop & Start and drive at walking speed.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131