Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 5008 2009-2016 Owner's Manual Comfort Dual-zone digital air conditioning

3Comfort655008_en_Chap03_confort_ed01-2015The air conditioning only operates when the engine is running.The driver and front passenger can each adjust the temperature to their requirements.FTurn control 2 or 3 to the left or to the right respectively to decrease or increase this value.A setting around the value 21 provides optimum comfort. However, depending on your requirements, a setting between 18 and 24 is normal.You are advised to avoid a left / right setting difference of more than 3.4. Automatic visibility programmeThe automatic comfort programme may not be sufficient to quickly demist or defrost the windscreen and side windows (humidity, several passengers, ice, etc.).FIn this case, select the automatic visibility programme.The system automatically controls the air conditioning, the air flow and the air intake and provides optimum distribution of the ventilation to the windscreen and side windows.Automatic operationFPress the "AUTO" button. The indicator lamp on the button comes on.Dual-zone digital air conditioningWe recommend the use of this mode: it permits automatic and optimised adjustment of all of the functions, passenger compartment temperature, air flow, air distribution and air recirculation, in accordance with the comfort value that you have chosen.This system is designed to operate effectively in all seasons, with the windows closed.The value indicated on the display corresponds to a level of comfort and not to a temperature in degrees Celsius or Fahrenheit.FTo switch it off, press the "visibility" button again or press the "AUTO" button, the indicator lamp in the button goes off or the indicator lamp on the "AUTO" button comes on.1. Automatic comfort programme2-3. Driver-passenger side adjustmentWhen the engine is cold, to prevent too great a distribution of cold air, the air flow will reach its optimum level gradually.In cold weather, it favours the distribution of warm air to the windscreen, side windows and footwells only.On entering the vehicle, if the interior temperature is much colder or warmer than the comfort value, there is no need to change the value displayed in order to obtain the comfort required more quickly. The system corrects the difference in temperature automatically and as quickly as possible.
Comfort665008_en_Chap03_confort_ed01-2015Manual operationFPress this button to switch off the air conditioning.6. Air distribution adjustmentFPress one or more buttons to direct the air flow towards:5. Air conditioning On / Off-the windscreen and side windows (demisting or defrosting),-the windscreen, the side windows and the vents,-the windscreen, the side windows, thevents and the footwells,-the vents and the footwells,-the vents,-the footwells,-the windscreen, the side windows and the footwells.Switching the system off could result in discomfort (humidity, condensation).FPress this button again to return to automatic operation of the air conditioning. The indicator lamp in the "A/C" button comes on.To obtain cool air sooner, you can use air recirculation for a few moments. Then return to exterior air intake.In winter, we recommend that you close the rear vents.If you wish, you can make a different choice from that offered by the system by changing a setting. The other functions will still be controlled automatically.FPressing the "AUTO" button returns the system to completely automatic operation.For maximum cooling or heating of the passenger compartment, it is possible to exceed the minimum value 14 or the maximum value 28.FTurn control 2 or 3 to the left until "LO" (low) is displayed or to the right until "HI" (high) is displayed.
3Comfort675008_en_Chap03_confort_ed01-2015Switching the system off/onFTurn the air flow control to the left until all of the indicator lamps go off.This action switches off all of the functions of the system.Temperature related comfort is no longer guaranteed but a slight flow of air, due to the movement of the vehicle, can still be felt.FTurn the air flow dial to the right or press the "AUTO" button to reactivate the system with the values set before it was switched off.9. Rear ventilation (Rear)FPress this button to allow the air to circulate towards the rear. The temperature will be equal to the left-hand comfort value for the rear left passengers and equal to the right-hand comfort value for the rear right passengers. The indicator lamp in the button comes on.8. Air recirculationFPress this button to recirculate the interior air. The indicator lamp comes on.-Air closed/intake (automatic mode). Press this button, the warning lamp comes on.7. Air flow adjustmentFTurn this control to the left to decrease the air flow or to the right to increase the air flow.The air flow indicator lamps, between the two fans, come on progressively according to the value requested.With Stop & Start, when demisting has been activated, the STOP mode is not available.Avoid driving for prolonged periods with the system off.-Forced closing of the air intake (manual mode). Press this button to recirculate the interior air, the warning lamp come on.Air recirculation enables the passenger compartment to be isolated from exterior odours and smoke.FAs soon as possible, press the "auto" button to allow the intake of exterior air and avoid the misting of windows.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131