Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 5008 2009-2016 Owner's Manual Comfort

Comfort605008_en_Chap03_confort_ed01-2015Heating and VentilationControlsThe incoming air follows various routes depending on the controls selected by the driver, the front passenger and rear passengers, according to the level of equipment.The temperature control enables you to obtain the level of comfort required by mixing the air of the various circuits.The air distribution control enables you to select the air vents used in the passenger compartment by the combined use of the associated buttons.The air flow control enables you to increase or reduce the speed of the ventilation fan.These controls are grouped together on control panel A on the centre console.Air intakeThe air circulating in the passenger compartment is filtered and originates either from the outside via the grille located at the base of the windscreen or from the inside in air recirculation mode.Air distribution1.Windscreen demisting/defrosting vents.2.Front side window demisting/defrosting vents.3.Side adjustable air vents.4.Central adjustable air vents.5.Air outlets to the front footwells.6.Adjustable air vents for the rear passengers.7.Air outlets to the rear footwells.
3Comfort615008_en_Chap03_confort_ed01-2015The air conditioning system does not contain chlorine and does not present any danger to the ozone layer.Recommendations for ventilation and air conditioningIn order for these systems to be fully effective, follow the operation and maintenance guidelines below:FIf the interior temperature remains very high after the vehicle has been parked in the sun for a considerable time, first ventilate the passenger compartment for a few minutes.Place the air flow control at a sufficient level to provide an adequate renewal of air in the passenger compartment.FTo obtain an even air distribution, take care not to obstruct the exterior air intake grilles located at the base of the windscreen, the nozzles, the vents and the air outlets, as well as the air extractor located in the boot.FIn normal conditions, use the intake of exterior air as prolonged use of the air recirculation may cause misting of the windows and side windows.FDo not cover the sunshine sensor, located on the dashboard; this is used for regulation of the automatic air conditioning system.FOperate the air conditioning system for 5 to 10 minutes, once or twice a month to keep it in good working order.FEnsure that the passenger compartment filter is in good condition and have the filter elements replaced regularly (refer to the "Checks" section).We recommend the use of a combined passenger compartment filter. Thanks to its second special active filter, it contributes to the purification of the air breathed by the occupants and the cleanliness of the passenger compartment (reduction of allergic symptoms, bad odours and greasy deposits).FThe air conditioning uses power from the engine while operating. This results in an increase in the vehicle's fuel consumption.When towing at or near maximum capacity or on steep slopes in high ambient temperatures, switching off the air conditioning saves engine power and so improves towing capacity.Condensation created by the air conditioning results in a discharge of water under the vehicle when stationary, which is perfectly normal.FTo ensure correct operation of the air conditioning system, you are also advised to have it checked regularly.FIf the system does not produce cold air, do not use it and contact a PEUGEOT dealer or a qualified workshop.Rear ventilation adjustmentAfter pressing the "REAR" button, turn the adjustment dial of the rear side vents to decrease or increase the flow of air.Take care not to obstruct the side vents and the air outlets on the floor.To shut off the flow of air, close the vents and set the dial to 0.
Comfort625008_en_Chap03_confort_ed01-20152. Air flow adjustmentFTurn the dial from position1to position 5 to obtain a comfortable air flow.Windscreen, side windows and front-rear footwells.Footwells, front-rear (closing the vents increases the flow to the footwells).Central, side and rear vents.FTurn the dial from blue (cold) to red (hot) to adjust the temperature to your requirements.Windscreen and side windows.1. Temperature adjustmentThe air distribution can be adapted by placing the dial in an intermediate position.The air conditioning can only operate with the engine running.4. Air intake / Air recirculationThe intake of exterior air limits misting of the windscreen and side windows.The recirculation of interior air insulates the passenger compartment from exterior odours and smoke.Return to exterior air intake as soon as possible to prevent deterioration of the air quality and demisting performance.3. Air distribution adjustmentFPress the button to recirculate the interior air. The indicator lamp comes on to confirm this.FPress the button again to permit the intake of exterior air. The indicator lamp goes off to confirm this.Manual air conditioningFIf you place the air flow control in position 0 (deactivation of the system), the temperature is no longer maintained at a comfortable level. However, a slight flow of air, due to the movement of the vehicle, can still be felt.
3Comfort635008_en_Chap03_confort_ed01-2015Demisting/defrosting5. Air conditioning On / OffThe air conditioning is designed to operate effectively in all seasons, with the windows closed.It enables you to:-lower the temperature, in summer,-increase the effectiveness of the demisting in winter, above 3 °C.Switching onFPress the "A/C" button, the button's indicator lamp comes on.The air conditioning does not operate when the air flow adjustment control 2 is in position "0".To obtain cooled air more quickly, you can use recirculation of interior air for a few moments. Then return to fresh air intake.The marking on the control panel indicates the position of the controls to quickly demist or defrost the windscreen and side windows:Fplace the air intake control 4 in the "Exterior air intake" position (indicator lamp off),Fplace the air distribution dial 3 in the "Windscreen position",Fplace the air flow dial 2 in position 5 (maximum),Fplace the temperature dial 1 in the red position (hot).Switching offFPress the "A/C" button again, the button's indicator lamp goes off.Switching off may affect comfort levels (humidity, condensation).With Stop & Start, when demisting has been activated, the STOP mode is not available.
Comfort645008_en_Chap03_confort_ed01-2015The control button is located on the air conditioning system control panel.Rear screen demist - defrostSwitching onSwitching offThe demist/defrost switches off automatically to prevent an excessive consumption of current.FIt is possible to stop the demist/defrost operation before it is switched off automatically by pressing the button again. The indicator lamp associated with the button goes off.FPress this button to demist/defrost the rear screen and, depending on version, the door mirrors. The indicator lamp associated with the button comes on.The rear screen demist - defrost can only operate when the engine is running.FSwitch off the demist/defrost of the rear screen and door mirrors as soon as it is no longer needed as lower current consumption results in reduced fuel consumption.
3Comfort655008_en_Chap03_confort_ed01-2015The air conditioning only operates when the engine is running.The driver and front passenger can each adjust the temperature to their requirements.FTurn control 2 or 3 to the left or to the right respectively to decrease or increase this value.A setting around the value 21 provides optimum comfort. However, depending on your requirements, a setting between 18 and 24 is normal.You are advised to avoid a left / right setting difference of more than 3.4. Automatic visibility programmeThe automatic comfort programme may not be sufficient to quickly demist or defrost the windscreen and side windows (humidity, several passengers, ice, etc.).FIn this case, select the automatic visibility programme.The system automatically controls the air conditioning, the air flow and the air intake and provides optimum distribution of the ventilation to the windscreen and side windows.Automatic operationFPress the "AUTO" button. The indicator lamp on the button comes on.Dual-zone digital air conditioningWe recommend the use of this mode: it permits automatic and optimised adjustment of all of the functions, passenger compartment temperature, air flow, air distribution and air recirculation, in accordance with the comfort value that you have chosen.This system is designed to operate effectively in all seasons, with the windows closed.The value indicated on the display corresponds to a level of comfort and not to a temperature in degrees Celsius or Fahrenheit.FTo switch it off, press the "visibility" button again or press the "AUTO" button, the indicator lamp in the button goes off or the indicator lamp on the "AUTO" button comes on.1. Automatic comfort programme2-3. Driver-passenger side adjustmentWhen the engine is cold, to prevent too great a distribution of cold air, the air flow will reach its optimum level gradually.In cold weather, it favours the distribution of warm air to the windscreen, side windows and footwells only.On entering the vehicle, if the interior temperature is much colder or warmer than the comfort value, there is no need to change the value displayed in order to obtain the comfort required more quickly. The system corrects the difference in temperature automatically and as quickly as possible.
Comfort665008_en_Chap03_confort_ed01-2015Manual operationFPress this button to switch off the air conditioning.6. Air distribution adjustmentFPress one or more buttons to direct the air flow towards:5. Air conditioning On / Off-the windscreen and side windows (demisting or defrosting),-the windscreen, the side windows and the vents,-the windscreen, the side windows, thevents and the footwells,-the vents and the footwells,-the vents,-the footwells,-the windscreen, the side windows and the footwells.Switching the system off could result in discomfort (humidity, condensation).FPress this button again to return to automatic operation of the air conditioning. The indicator lamp in the "A/C" button comes on.To obtain cool air sooner, you can use air recirculation for a few moments. Then return to exterior air intake.In winter, we recommend that you close the rear vents.If you wish, you can make a different choice from that offered by the system by changing a setting. The other functions will still be controlled automatically.FPressing the "AUTO" button returns the system to completely automatic operation.For maximum cooling or heating of the passenger compartment, it is possible to exceed the minimum value 14 or the maximum value 28.FTurn control 2 or 3 to the left until "LO" (low) is displayed or to the right until "HI" (high) is displayed.
3Comfort675008_en_Chap03_confort_ed01-2015Switching the system off/onFTurn the air flow control to the left until all of the indicator lamps go off.This action switches off all of the functions of the system.Temperature related comfort is no longer guaranteed but a slight flow of air, due to the movement of the vehicle, can still be felt.FTurn the air flow dial to the right or press the "AUTO" button to reactivate the system with the values set before it was switched off.9. Rear ventilation (Rear)FPress this button to allow the air to circulate towards the rear. The temperature will be equal to the left-hand comfort value for the rear left passengers and equal to the right-hand comfort value for the rear right passengers. The indicator lamp in the button comes on.8. Air recirculationFPress this button to recirculate the interior air. The indicator lamp comes on.-Air closed/intake (automatic mode). Press this button, the warning lamp comes on.7. Air flow adjustmentFTurn this control to the left to decrease the air flow or to the right to increase the air flow.The air flow indicator lamps, between the two fans, come on progressively according to the value requested.With Stop & Start, when demisting has been activated, the STOP mode is not available.Avoid driving for prolonged periods with the system off.-Forced closing of the air intake (manual mode). Press this button to recirculate the interior air, the warning lamp come on.Air recirculation enables the passenger compartment to be isolated from exterior odours and smoke.FAs soon as possible, press the "auto" button to allow the intake of exterior air and avoid the misting of windows.
Comfort685008_en_Chap03_confort_ed01-2015Front seats with manual adjustmentsHeightFPull the control upwards to raise or push it downwards to lower, as many times as required, to obtain the position required.Backrest angleFPush the control rearwards.Forwards-backwardsFRaise the control and slide the seat forwards or backwards.Seat consisting of a seat cushion, a seat back and a head restraint which can all be adjusted to adapt your position for ease of driving and comfort.Before moving the seat backwards, ensure that there is nothing that might prevent the full travel of the seat, so as to avoid the risk of of jamming the seat caused by the presence of objects on the floor behind the seat or rear passengers. If the seat jams, stop the movement immediately.
3Comfort695008_en_Chap03_confort_ed01-2015Driver's electric seatForwards-backwardsFPush the control forwards or rearwards to slide the seat.Cushion height and angleFTilt the rear part of the control upwards or downwards to obtain the required height.FTilt the front part of the control upwards or downwards to obtain the required angle.Backrest angleFTilt the control forwards or rearwards to adjust the angle of the seat back.Seat consisting of a seat cushion, a seat back and a head restraint which can all be adjusted to adapt your position for ease of driving and comfort.
Comfort705008_en_Chap03_confort_ed01-2015Before moving the seat backwards, ensure that there is nothing that might prevent the full travel of the seat, so as to avoid the risk of of jamming the seat caused by the presence of objects on the floor behind the seat or rear passengers. If the seat jams, stop the movement immediately.The electric functions of the driver's seat are active for approximately one minute after opening the front door. They are deactivated approximately one minute after the ignition is switched off and in economy mode.To reactivate them, switch on the ignition.FTo raise the head restraint, pull it forwards and upwards at the same time.FTo remove the head restraint, press the lug A and pull the head restraint upwards.FTo put the head restraint back in place, engage the head restraint stems in the openings keeping them in line with the seat back.FTo lower the head restraint, press the lug Aand the head restraint at the same time.FTo adjust the angle of the head restraint, tilt its lower part forwards or rearwards.Head restraint height and angle adjustmentThe head restraint is fitted with a frame with notches which prevents it from lowering; this is a safety device in case of impact.The adjustment is correct when the upper edge of the head restraint is level with the top of the head.Before moving off, check the adjustment of the head restraint; adjust it if the seat has been occupied by someone of different size.Never drive with the head restraints removed; they must be in place and adjusted correctly.
3Comfort715008_en_Chap03_confort_ed01-2015Heated seats controlWith the engine running, the front seats can be heated separately.FUse the adjustment dial, placed on the side of each front seat, to switch on and select the level of heating required:0: Off.1: Low.2: Medium.3: High.Manual lumbar adjustmentFTurn the knob manually to obtain the desired level of lumbar support.
Comfort725008_en_Chap03_confort_ed01-2015Table position, front passenger seatThis position, associated with that of the rear seats, allows you to transport long objects inside the vehicle.The maximum weight on the seat is 30 kg.Folding the seat backrestFRaise the armrest and fold up the "aircraft" style table, fixed on the back of the seat.FCheck that no object, either on or underneath the seat, could hinder its movement.FTo make the operation easier, place the head restraint in the low position (if the seat is in the fully forward position).FIf your vehicle is fitted with the video pack, place the protective cover on the head restraint.FLift the control, located behind the seat, then guide the seat back forwards.Returning the seat to the normal positionFGuide the seat backrest rearwards until it locks in place.When the seat backrest is in this position, only the 2nd row passenger seat located behind the driver can be used.
3Comfort735008_en_Chap03_confort_ed01-20152nd row seatsForwards-backwards adjustmentLift the control A, located at the front of the seat, then adjust the seat to the position desired."Comfort" positionThe three 2nd row seats are independent of each other and all the same width. They all have a "comfort" position.Placing a seat in the "comfort" positionFPull on the control B and guide the seat rearwards.The backrest reclines and the seat base moves forward slightly.Returning the seat to the initial positionFPull on the control B and allow the seat to come forwards.Always supervise any movements of seats by children.
Comfort745008_en_Chap03_confort_ed01-2015Flat floorEach seat can be folded onto the floor to enable you to modify your vehicle’s interior space.Folding the seat from the 2nd rowFPlace the seats as far towards the rear as possible.FPull firmly upwards on strap C, to unlock the seat; keep pulling until the seat is fully folded.FPush the backrest slightly forwards so that the backrest pivots, folding onto the seat base. The assembly then lowers onto thefloor.Folding the seat from the bootWhen loading, for example, you can fold the seat or seats directly from the boot, once you have folded the 3rd row seats (7 seat version).FPlace the seats as far towards the rear as possible.FPull on the strap D to release the chosen seat and push the backrest gently forwards.Repositioning seatFIf necessary, return the 2nd row seat rigid panels to their initial position and lock them.FRaise the backrest and push it rearwards until it locks.Supervise any movement of seats by children.Before moving the 3rd row seats (7 seat version), return the 2nd row seat rigid panels to their initial position and lock them.Emergency exit: if the first system (strap C) fails, strap D enables the 3rdrow passengers to exit quickly.To avoid damaging the mechanism, the strap D unclips under excessive force. Simply reclip it to restore the system to working order.
3Comfort755008_en_Chap03_confort_ed01-2015Rigid panelEach 2nd row seat backrest has a rigid panel attached.This panel enables you to:-have a continuous load surface in the boot, whatever the positions of the seats,-avoid having objects sliding under the 2ndrow seats. 30 kg maximum on each panel.Releasing / Securing the rigid panelFBefore deploying the rigid panels, check that the 2nd row seats are positioned as far towards the rear as possible.FSlide the latch E on the panel upwards, to release it.FReturn the panel to its initial position, then slide the latch E downwards, to secure it.Entering / Exiting the 3rd row (7 seat version)Repositioning the seat, from the outside, with the door openIf there are passengers seated in the 3rd row (7 seat version):FManually return the assembly as far as possible rearwards; the seat does not return as far as the maximum rearwards position so as to retain leg space for the 3rd row passengers.FFold the seat base.FRaise the aircraft style table on the 2nd row seat if it is down.FHold the control F in the raised position, the seat unlocks and the seat base comes up against the backrest.FPush the seat backrest forwards, holding the control F forwards.
Comfort765008_en_Chap03_confort_ed01-20153rd row seats (7 seat version)Concertina boardsTwo rigid concertina boards, which cannot be separated from the vehicle, cover the two 3rd row seats, when these are in the folded position.Folding the concertina boardsFPull on the control, the 3 sections of the board will fold like a concertina.When the 3rd row seats are upright, these concertina boards can be left either:-flat behind the seats,-in the vertical position,thereby leaving a storage area available.The two rigid boards can each support a maximum of 100 kg.Installing a seatFRemove the load space screen.FIf necessary, return the 2nd row rigid panels to their initial position and lock them.FCorrectly position the concertina board vertically behind the seat.FPull on the control G, located behind the seat backrest. The backrest tilts rearwards pulling the seat base with it. The seat locks in the open position.
3Comfort775008_en_Chap03_confort_ed01-2015Storing a seatFLower the head restraints.FCorrectly position the concertina board vertically behind the seat.FPull on the control H, located at the bottom of the seat backrest. The seat is released.FNext push the backrest gently forwards. The backrest pivots folding onto the seat base. The seat base then folds into the stowage area provided for that purpose.FReposition the concertina boards over the folded seats.Before moving the 3rd row seats, return the rigid panels of the 2nd row seats to the upright position and lock them in place.Do not try to fold a 3rd row seat that has not first had the backrest fully locked in place.Do not leave objects either on or underneath the seat bases of the 3rd row seats when you are folding them.Do not leave your hand on the controlHas you fold the seats, as you risk trapping your fingers.Rear head restraintsThe rear head restraints can be removed and have two positions:-high, position for use,-low, storage position.To raise a head restraint, pull it upwards.To lower it, press the lug then the head restraint.To remove it, place it in the high position, push the lug and pull it upwards.To refit it, engage the head restraint rods in the holes taking care to remain in line with the seat back.Never drive with the head restraints removed, they must be in place and correctly adjusted.
Comfort785008_en_Chap03_confort_ed01-2015Seat modularity and the various seat configurationsExamples of configurations7 seatsTransporting long objects5 seatsTransport (4 seats)Loading a large volumeDesigned to be modular, your vehicle offers numerous seat installation and loading configurations.Operations to change the existing configuration must only be carried out when stationary (see paragraphs "Rear seats").
3Comfort795008_en_Chap03_confort_ed01-2015MirrorsEach fitted with an adjustable mirror glass permitting the lateral rearward vision necessary for overtaking or parking. They can also be folded for parking in confined spaces.Folding-Automatic: lock the vehicle using the remote control or the key.-Manual: with the ignition on, pull control Arearwards.Unfolding-Automatic: unlock the vehicle using the remote control or the key.-Manual: with the ignition on, pull control Arearwards.AdjustmentFMove control A to the right or to the left to select the corresponding mirror.FMove control B in all four directions to adjust.FReturn control A to the central position.Demisting - DefrostingIf your vehicle is fitted with heated mirrors, the demisting-defrosting operates by switching on the heated rear screen.Refer to the "Rear screen demist-defrost" section.The rear screen demist - defrost can only operate when the engine is running.As a safety measure, the mirrors should be adjusted to reduce the blind spots.The objects observed are, in reality, closer than they appear.Take this into account in order to correctly judge the distance of vehicles approaching from behind.If the mirrors are folded using control A, they will not unfold when the vehicle is unlocked. Pull again on control A.The folding and unfolding of the door mirrors using the remote control can be deactivated by a PEUGEOT dealer or a qualified workshop.Fold the mirrors when putting your vehicle through an automatic car wash.Door mirrorsIf necessary, it is possible to fold the mirrors manually.
Comfort805008_en_Chap03_confort_ed01-2015AdjustmentFAdjust the mirror so that the glass is directed correctly in the "day" position.Manual day/night modelDay / night positionFPull the lever to change to the "night" anti-dazzle position.FPush the lever to change to the normal "day" position.Rear view mirrorAdjustable mirror providing a central rearward view.Equipped with an anti-dazzle system, which darkens the mirror glass and reduces the nuisance to the driver caused by the sun, headlamps from other vehicles...Automatic day/night modelBy means of a sensor, which measures the light from the rear of the vehicle, this system automatically and progressively changes between the day and night uses.In order to ensure optimum visibility during your manoeuvres, the mirror lightens automatically when reverse gear is engaged.
3Comfort815008_en_Chap03_confort_ed01-2015Steering wheel adjustmentFWhen stationary, pull the control lever to release the adjustment mechanism.FAdjust the height and reach to suit your driving position.FPush the control lever to lock the adjustment mechanism.As a safety measure, these operations should only be carried out with the vehicle stationary.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131