Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 5008 2009-2016 Owner's Manual Audio equipment and telematics PEUGEOT Connect Navigation (RT6)

2735008_en_Chap12b_RT6-2-8_ed01-2015The system is protected in such a way that it will only operate in your vehicle.PEUGEOT Connect Navigation (RT6)01First steps - Control panel As a safety measure, the driver must only carry out operations which require prolonged attention while the vehicle is stationary.When the engine is switched off and to prevent discharging of the battery, the system switches off following the activation of the energy economy mode.CONTENTS02Steering mounted controls 03General operation 04Navigation - Guidance 05Traffic information 06Using the telephone 07Radio 08Music media players 09Audio settings 10Configuration 11Screen menu maps p.p.p.p.p.p.p.p.p.p.p. 274 276 277 279 292 295 305 310 316 317 318GPS navigation systemMultimedia audio systemBluetooth® telephoneFrequently asked questions p. 322
012745008_en_Chap12b_RT6-2-8_ed01-2015Select:-the next lower / higher radio frequency automatically.-the previous / next CD track, MP3 track or media.-the left / right of the screen when a menu is displayed.Move left / right in "Move the map" mode.Abandon the current operation, up one level in the menu.Long press: return to the permanent display.Open the "Configuration" menu.Long press: access to the GPS coverage and the navigation demonstration mode.Open the "Traffic information" menu and display the current traffic alerts.Select:-the previous/next line in a list or menu.-the previous / next media folder.-step by step selection of the previous/next radio frequency.-the previous / next MP3 folder.Move up/down, in "Move the map" mode.FIRSTSTEPSAccess to the "Navigation - guidance" menu and display the recent destinations.Short press without the engine running: on / off.Short press with the engine running: audio source off / restore.MODE button: Selection of the type of permanent display.Long press: black screen (DARK).Selection and OK confirmation knob:Selection of an item on the screen or in a list or a menu, then confirmation with a short press.Other than for menus and lists, a short press displays a contextual menu depending on the current screen.Rotation with map displayed: zoom the map scale in and out.Volume adjustment (each source is independent, including TA messages and navigation instructions).
012755008_en_Chap12b_RT6-2-8_ed01-2015Press and hold: reinitialise the system.Open the "Telephone" menu and display the list of recent calls or accept an incoming call.FIRSTSTEPSShort press: select pre-set radio station.Long press: pre-set the current station.Access to the "MUSIC" menu, and display of the CD/MP3/Apple® tracks and folders.Long press: display the audio settings screen for the "MEDIA" (CD/USB/iPod/Streaming/AUX) sources.Access to the "RADIO" menu and display the list of stations received.Long press: display the audio settings screen for the radio tuner source.
022765008_en_Chap12b_RT6-2-8_ed01-2015RADIO: select the previous/next preset station.Select the next entry in the address book.SRC/TEL button:change the audio source,start a call from the address book,call/end call on the telephone,press for more than 2 seconds: open the address book.RADIO: change to the previous radio station in the list.Long press: automatic search for a lower frequency.CD: select the previous track.CD: press and hold: fast reverse.RADIO: change to the next radio station in the list.Long press: automatic search for a higher frequency.CD: select the next track.CD: press and hold: fast forward play.Volume increase.Volume decrease.Mute: press the volume increase and decrease buttons simultaneously.Restore the sound by pressing one of the two volume buttons.STEERINGMOUNTEDCONTROLS
032775008_en_Chap12b_RT6-2-8_ed01-2015For the details of the menus, refer to the "Screen menu map" section.For cleaning the screen, the use of a soft, non-abrasive cloth (spectacles cloth) is recommended, with no additional product." RADIO ""TELEPHONE"(If conversation in progress)SETUP: PARAMETERS date and time, display configuration, sound, vehiclesettings.Change the audio source:RADIO: RADIO broadcasts.MUSIC: play MUSIC.Press the MODE button several times in succession for access to the following displays:"FULL SCREEN MAP""MAP IN WINDOW"(If navigation guidance in progress)GENERALOPERATION
032785008_en_Chap12b_RT6-2-8_ed01-2015A press on the knob gives access to short-cut menus according to the display in the screen.Display according to contextRADIO:Change wavebandMUSIC MEDIA PLAYERS, CD or USB (according to media):Play modes:NormalRandomRandom on all mediaRepetitionTELEPHONE (call in progress):Private modeFULL SCREEN MAP OR IN A NEW WINDOW:Stop / Restore guidanceSelect destinationEnter an addressDirectoryGPS coordinatesDivert routeMove the mapInfo. on locationSelect as destinationSelect as stageSave this place (contacts)Quit map modeGuidance criteriaPut call on holdDTMF ring tonesHang up1111111222221222111111FMTraffic anouncements (TA)DABInformationAMDivertissementSpecial or Urgent2222222Service announcements1GENERALOPERATION
042795008_en_Chap12b_RT6-2-8_ed01-2015List of recent destinations."Navigation - guidance"To delete the list of recent destinations, select "Guidance options" in the navigation menu then select "Delete last destinations" and confirm. Select "Yes" then confirm.Deleting just one destination is not possible.Go from the list to the menu (left/right)."Select destination""Journey leg and route""Guidance options""Map management""Stop / Restore guidance"Press NAV.orTo make full use of all of the functions of your navigation system, update the mapping regularly. Contact a PEUGEOT dealer or order your mapping update at http://peugeot.navigation.comA short press on the end of the lighting control stalk repeats the last navigation message.NAVIGATION - GUIDANCEAccess to the "NAVIGATION" menu
042805008_en_Chap12b_RT6-2-8_ed01-2015Press NAV to display the "Navigation - guidance" menu.Towards a new destinationSelecting a destinationSelect "Select destination" and confirm, then select "Enter an address" and confirm.Select the "Country" function then confirm.Select the "Town" or "Post code" function then confirm.Select the letters in the name of the town or the characters in a post code one at a time, confirming each one with the knob.Selection the town from the list offered, then confirm.A pre-set list (by entering the first few letters) of the towns in the country selected can be accessed directly by selecting and confirming "List" in the screen.If possible, enter the "Road" and "N°/X" information in the same way.Select "Archive" to save the address entered in a contact file.After about 60 seconds with no address entered, the system returns to the last home page; to return to the current input, start again with steps 1 and 2 then press again.Confirm "OK" to start guidance.Select the guidance criteria: "Fastest route", "Shortest route" or optimised "Distance/Time", then select the desired restriction criteria: "With tolls", "With Ferry", or "Traffic info" then confirm "OK".NAVIGATION - GUIDANCE
042815008_en_Chap12b_RT6-2-8_ed01-2015Towards a recent destinationPress NAV to display the "Navigation - guidance" menu.Select the desired destination and confirm to start navigation.Towards a contact in the directory of contactsSelect "Select destination" and confirm, then select "Directory" and confirm.Selection the desired destination from your contacts and confirm "OK" to start navigation.Press NAV to display the "Navigation - guidance" menu.Navigation towards a contact is only possible if there is an address entered in the audio navigation system.Delete recent destinationsPress NAV to display the "Navigation - guidance" menu.Select "Options" and confirm and then "Delete recent destinations" and confirm.NAVIGATION - GUIDANCE
042825008_en_Chap12b_RT6-2-8_ed01-2015Select "Select destination" and confirm, then select "GPS coordinates" and confirm.Enter the GPS coordinates and confirm"OK" to start navigation.Press NAV to display the "Navigation - guidance" menu.Towards GPS coordinatesTowards a point on the mapWith the map displayed, press OK to display the contextual menu. Select "Move the map" and confirm.Press OK to display the contextual menu for "Move the map" mode.Select "Select as destination" or "Select as stage" and confirm.Move the cursor using the control to identify the desired destination.NAVIGATION - GUIDANCE
042835008_en_Chap12b_RT6-2-8_ed01-2015Towards points of interest (POI)The points of interest (POI) indicate all of the service locations in the vicinity (hotels, various businesses, airports...).Select the "Enter an address" function and confirm, then select Select destination and confirm.To select a POI close to your current location, select "POI" and confirm, then select "Around the current place" and confirm.To select a POI as a stage on the route, select "POI" and confirm, then select "On the route" and confirm.To select a POI as a destination, first enter the country and town (refer to the "Towards a new destination" section), select "POI" and confirm, finally select "Near" and confirm.Search for POIs in the categories suggested in the following pages.Select "Search by Name" to search for POIs by name and not by proximity.Select the POI and confirm "OK" to start navigation.Press NAV to display the "Navigation - guidance" menu.NAVIGATION - GUIDANCE
042845008_en_Chap12b_RT6-2-8_ed01-2015NAVIGATION - GUIDANCEThis icon appears when several POIs are grouped together in the same area. Zooming in on this icon shows details of the POIs.Service stationGaragePEUGEOTCovered car parkCar parkRest areaHotelRestaurantCafeteriaBed and breakfastRailway stationBus stationPortIndustrial estateSupermarketVending machineSports complex, sports centre, sports groundSwimming poolWinter sports resortAirportTheme parksHospital, Chemist, VetPolice stationTown hallPost officeMuseum, Culture, Theatre, Historic monumentTourist information, Tourist attractionRisk areas / Danger areas*List of principal points of interest (POI)* According to availability in the country.SchoolAn annual mapping update allows new points of interest to be presented to you.You can also update the Risk areas / Danger areas every month.The detailed procedure is available on:http://peugeot.navigation.com.Cinema
042855008_en_Chap12b_RT6-2-8_ed01-2015NAVIGATION - GUIDANCESelect:-"Visual alert"-"Audible alert"-"Alert only in guidance"-"Overspeed alarm only".The choice of time of notification defines how long in advance that Risk area warnings are given.Select "OK" to confirm the screen.Select "Guidance options" and confirm, then select "Set parameters for risk areas" and confirm.These functions are only available if risk areas have been downloaded and installed on the system.The detailed procedure for updating risk area POIs can be found at http://peugeot.navigation.com.Press NAV to display the "Navigation - guidance menu.Settings for risk area / danger area alerts
042865008_en_Chap12b_RT6-2-8_ed01-2015Adding a stagePress NAV to display the "Navigation - guidance" menu.Select "Journey leg and route" then confirm.Select "Close to" a route passing close to the stage or "Strict" for a route passing through the stage.Confirm "OK" to start the guidance, and give a general indication of the guidance route.Select "Add a stage" then confirm.The address of the stage is entered as a destination, by "Enter an address", a contact in "Directory", or "Previous destinations".Organising stagesTo organise stages, carry out operations1 to 2 again, then select "Order/delete journey legs" and confirm.Select and confirm to save themodifications.Select the stage that you want to move in the order.Select "Delete" to delete the stage.NAVIGATION - GUIDANCE
042875008_en_Chap12b_RT6-2-8_ed01-2015Route optionsCalculation criteriaSelect "Guidance options" and confirm.Select "OK" and confirm to save themodifications.Select "Define calculation criteria" and confirm.This function allows modification of:-the guidance criteria: ("Fastest route", "Shortest route", "Distance/Time"),-the exclusion criteria: ("With tolls" or "With Ferry"),-traffic avoidance: ("Traffic info").Press NAV to display the "Navigation - guidance" menu.If traffic avoidance (Traffic info) is selected, the system suggests an alternative route if there is a delay on the guidance route.NAVIGATION - GUIDANCE
042885008_en_Chap12b_RT6-2-8_ed01-2015Press NAV to display the "Navigation - guidance" menu.Map managementSelecting the points of interest displayed on the mapSelect "Map management" and confirm.Select from the various categories the ones that you want to display on the screen.Select "Map details" and confirm.Select "Default" to have only "Filling stations, garages" and "Risk areas" appear on the map (if installed in the system).Select "OK" then confirm and select"OK" again then confirm to save the modifications.NAVIGATION - GUIDANCE
042895008_en_Chap12b_RT6-2-8_ed01-2015Select "Map management" and confirm.Select:-"Vehicle direction" to have the map follow the direction of travel,-"North direction" to keep the map always North up,-"Perspective view" to display a perspective view.Select "Map orientation" and confirm.The colour of the map, different from the day and night mode, is configured in the "SETUP" menu.Map orientationPress NAV to display the "Navigation - guidance" menu.Street names are visible on the map from the 100 m scale.NAVIGATION - GUIDANCE
042905008_en_Chap12b_RT6-2-8_ed01-2015Press NAV to display the "Navigation - guidance" menu.Navigation voice synthesisSelect "Guidance options" and confirm.Adjusting the volume / DeactivationSelect "Set speech synthesis" and confirm.Select the volume graph and confirm.Select "Deactivate" to deactivate voice messages.Select "OK" and press the dial to confirm.Adjust the volume to the desired level and confirm.The volume of messages can be adjusted during the transmission of the message using the volume adjustment control.The volume setting of guidance messages is also accessible via the "SETUP" / "Voice synthesis" menu.NAVIGATION - GUIDANCE
042915008_en_Chap12b_RT6-2-8_ed01-2015Male voice / Female voicePress SETUP to display the configuration menu.Select "Select male voice" or "Select female voice" then confirm "Yes" to activate a male or female voice. The system restarts.Select "Voice synthesis" and confirm.NAVIGATION - GUIDANCE
052925008_en_Chap12b_RT6-2-8_ed01-2015Access to the "TRAFFICINFORMATION" menuList of TMC messages in order of distance from the vehicle.Go from the list to the menu (left/right)."Traffic information""Geographic filter""Select TMC station" (automatic, manual)"Display/Do not display messages"orPress "TRAFFIC".TRAFFICINFORMATION
052935008_en_Chap12b_RT6-2-8_ed01-2015Configure the filtering and display of TMC messagesTMC (Traffic Message Channel) messages with GPS Navigation provide traffic information in real time.Press the TRAFFIC button to display the "Traffic information" menu.Select the "Geographic filter" function and confirm.The system offers a choice of:-"Retain all the messages",or-"Retain the messages"●"Around the vehicle", (confirm the mileage to modify and select the distance),●"On the route".Confirm "OK" to save the modifications.We recommend:-a filter on the route and-a filter around the vehicle of:-12 miles (20 km) in urban areas,-30 miles (50 km) on motorways.TRAFFICINFORMATION
052945008_en_Chap12b_RT6-2-8_ed01-2015Principal TMC symbolsRed and yellow triangle: traffic information, for example:Black and blue triangle: general information, for example:Weather reportsModified signageRisk of explosionTraffic reportsNarrow carriagewayRoad closedWindSlippery surfaceDemonstrationFogAccidentDangerParkingDelayNo entrySnow / iceRoadworksTraffic jamReceiving TA messagesThe TA (Traffic Announcement) function gives priority to TA alert messages. To operate, this function needs good reception of a radio station transmitting this type of message. When a traffic report is transmitted, the current audio source (Radio, CD, USB, ...) is interrupted automatically to play the TA message. Normal playback of the audio source resumes at the end of the transmission of themessage.Press RADIO to display the menu.Select "Service announcements" thenconfirm.Activate or deactivate "TA" then confirm.The volume setting for TA messages can be adjusted only during the transmission of this type of alert.Activate or deactivate the function at any time by pressing the button.During a message, press the button to interrupt it.TRAFFICINFORMATION
062955008_en_Chap12b_RT6-2-8_ed01-2015Access to the "TELEPHONE" menu"Telephone""Dial""Directory of contacts""Contacts management""Phone functions""Bluetooth functions""Hang up"Go from the list to the menu (left/right).orList of recent calls sent and received with the telephone connected to the system.Press this button.To make a call, select a number in the list and confirm "OK" to start the call.Connecting a different telephone deletes the list of recent calls.No telephone connected.Telephone connected.Incoming call.Outgoing call.Synchronisation of contacts in progress.Telephone call in progress.In the top bar of the permanent displayUSINGTHETELEPHONE
062965008_en_Chap12b_RT6-2-8_ed01-2015USINGTHETELEPHONEPairing a Bluetooth® telephoneFirst connectionFor reasons of safety and because they require prolonged attention on the part of the driver, the operations for pairing the Bluetooth mobile telephone to the hands-free system of the audio unit must be carried out with the vehicle stationary.In the Bluetooth menu of your telephone, select the name "PEUGEOT" from the list of devices detected.Press this button.Select "Bluetooth functions" and confirm.Select "Peripherals search" and confirm.The list of peripheral devices detected is displayed. Wait until the "Connect" button is available.You can check the compatibility of your telephone at www.peugeot.co.uk (services).Activate the telephone's Bluetooth function and ensure that it is "visible to all" (telephone configuration).Quick procedure from the telephoneEnter a minimum 4 figure code in the telephone and confirm.Enter the same code in the system, select "OK" and confirm.Procedure from the system
062975008_en_Chap12b_RT6-2-8_ed01-2015USINGTHETELEPHONESelect "Connect" and confirm.The system offers to connect the telephone:-in "Hands-free mode" (telephone only),-in "Audio" mode (streaming: playing music files on the telephone),-or "All" (for selection of both modes).Select "OK" and confirm.Then accept automatic connection on the telephone to allow the telephone to reconnect automatically every time the vehicle is started.The ability of the system to connect in only one mode depends on the telephone. The two modes may both connect by default.The "Hands-free mode" should be used in preference if "Streaming" is not desired.The services available depend on the network, the SIM card and the compatibility of the Bluetooth telephone used. Check the telephone manual and with your network provider for details of the services available to you.Depending on the type of telephone, the system will ask you to accept or not the transfer of your contacts.On return to the vehicle, the last telephone connected automatically reconnects, within around 30 seconds after switching on the ignition (Bluetooth activated and visible).To modify the automatic connection mode, remove the pairing and pair the telephone again with the desired mode.Enter a minimum 4 figure code in the telephone and confirm.Enter the same code in the system, select "OK" and confirm.Select the name of the desired peripheral from the list of devices detected then confirm.
062985008_en_Chap12b_RT6-2-8_ed01-2015USINGTHETELEPHONEDirectory configuration / Synchronisation with the telephonePress PHONE then select "Contacts management" and confirm.Select "New contact" to enter a new contact.Select "Sort by Name/First name" or "Sort by First name/Name" to choose the order in which they appear.Select "Delete all contacts" to delete the contacts saved in the system.Select "Synchronization options":-No synchronization: only the contacts saved in the system (always present).-Display telephone contacts: only the contacts saved in the telephone.-Display SIM card contacts: only the contacts saved on the SIM card.-Display all phone contacts: contacts on the SIM card and in the telephone.Select "Import all the entries" to import all the contacts in the telephone and save them in the system.Once imported, a contact remains visible whatever telephone is connected.Select "Contact mem. status" to see the number of contacts saved in the system or imported, and the free memory.
062995008_en_Chap12b_RT6-2-8_ed01-2015Editing, importing or deleting a contactPress PHONE then select "Directory of contacts" and confirm.Select "Search", then turn the knob to choose in numerical or alphabetical order a group of contacts from the entries made previously, then confirm.Go to the list of contacts, select the desired contact then confirm.Select "Open" to view a contact on the telephone or modify a contact saved in the system.Select "Import" to copy a contact from the telephone to the system.Select "Delete" to delete a contact recorded in the system.USINGTHETELEPHONESelect OK or press the back button to exit this menu.Once the contact has been imported, the Bluetooth symbol disappears, replaced by the telephone symbol which shows that the contact has been saved in the system.It is not possible to modify or delete contacts in the telephone or the SIM card via the Bluetooth connection.In the "Directory of contacts" menu, the import and deletion of contacts is done one by one.
063005008_en_Chap12b_RT6-2-8_ed01-2015USINGTHETELEPHONEPress PHONE twice.Select "Dial" then confirm.Select "Directory of contacts" then confirm.Dial the telephone number using the virtual keypad selecting each number in turn.Confirm "OK" to make the call.Press TEL or twice on PHONE.Calling a new numberCalling a contactSelect the desired contact and confirm.If access was via the PHONE button, select "Call" and confirm.Select the number and confirm to start the call.Making a callUsing the telephone is not recommended while driving. We recommended that you park safely or make use of the steering mounted controls.
063015008_en_Chap12b_RT6-2-8_ed01-2015USINGTHETELEPHONECalling a recently entered numberPress TEL, select "Call list" and confirm,Select the desired number and confirm.To erase the calls log, press PHONE twice, select "Phone functions" and confirm then select "Delete calls log" and confirm.Ending a callPress PHONE then select "OK" to end the call.Or make a long press on TEL at the steering mounted controls.Or make two short presses on TEL at the steering mounted controls.Or press the MODE button, as many times as necessary, until the telephone screen is displayed.Press PHONE to display the calls log.orPress "OK" to display the contextual menu then select "Hang up" and confirm.It is always possible to start a call directly from the telephone; park the vehicle as a safety measure.
063025008_en_Chap12b_RT6-2-8_ed01-2015USINGTHETELEPHONEReceiving a callAn incoming call is announced by a ring and a superimposed display on the screen."Yes" to accept the call is selected by default.Press "OK" to accept the call.Select "No" and confirm to reject the call.A short press on TEL accepts an incoming call.A long press on TEL rejects an incoming call.
063035008_en_Chap12b_RT6-2-8_ed01-2015Options during a call*During a call, press the MODE button several times to select display of the telephone screen, then press "OK" to open the contextual menu.Select "Private mode" and confirm to take the call on the handset.Or select "Hands-free mode" and confirm to take the call via the vehicle's speakers.Select "Put call on hold" and confirm to put the current call on hold.Or select "Resume the call" and confirm to resume the call on hold.Select "DTMF ring tones" to use the numerical keypad, so as to navigate through the menu of an interactive vocal server.Select "Hang up" to end the call.* Depending on the compatibility of the phone and your service plan.it is possible to hold a 3-way conference call by making 2 calls in succession*. Select "Conferencemode call" in the contextual menu accessible using this button.Or make a short press on this button.USINGTHETELEPHONE
063045008_en_Chap12b_RT6-2-8_ed01-2015Press PHONE twice.Select "List of the paired peripherals" and confirm.It is possible to:-"Connect" or "Disconnect" the selected telephone,-delete the pairing of the selected telephone.It is also possible to select all pairings.Managing paired telephonesChanging the ringtonePress PHONE twice.Select "Phone functions" and confirm.Select "Ring options" and confirm.You can adjust the volume and the type of ringtone.Select "Bluetooth functions".Select "OK" and confirm to save the changes.USINGTHETELEPHONE
073055008_en_Chap12b_RT6-2-8_ed01-2015"FM / DAB / AM""Change waveband" ("FM / DAB / AM")"Options" ("TA, RDS, DAB/FM station tracking")"Audio settings" (see this section)"Update radio list"Alphabetical list of stations received.Press 5 or 6 or use the rotary control to select the previous or next station in the list.Go from the list to the menu (left/right).orPress RADIO.RADIOAccess to the "RADIO" menu
073065008_en_Chap12b_RT6-2-8_ed01-2015By alphabetical listPress RADIO, select the station of your choice and confirm.By automatic frequency searchPress 7 or 8 for the automatic search for a lower or higher radio frequency.Or turn the thumb wheel at the steering mounted controls.By manual frequency searchPress 5 or 6 to adjust the radio frequency step by step.Selecting a stationThe external environment (hill, building, tunnel, underground car park...) may interfere with the reception, including in RDS station tracking mode. This phenomenon is a normal result of the way in which radio waves are transmitted and does not in any way indicate a fault with the audio system.The quality of reception is represented by the number of active waves in this symbol.Press RADIO or OK to display the contextual menu.Changing wavebandSelect "Change waveband".Select "FM / DAB / AM" and confirm.RADIO
073075008_en_Chap12b_RT6-2-8_ed01-2015Press the button on the numerical keypad to recall a preset station.Or press then turn the thumb wheel at the steering mounted controls.Presetting a stationAfter selecting a station, press one of the buttons on the numerical keypad for 2 seconds to preset the current station.An audible signal confirms that the station has been preset.Press RADIO.Activate / Deactivate RDSRDS, if activated, allows you to continue listening to the same station by automatic retuning to alternative frequencies. However, in certain conditions, coverage of an RDS station may not be assured throughout the entire country as radio stations do not cover 100 % of the territory. This explains the loss of reception of the station during a journey.Select "Guidance options" then confirm.Activate or deactivate "RDS" then confirm.RADIO
073085008_en_Chap12b_RT6-2-8_ed01-2015RADIODisplay of options:if active but not available, the display will be greyed out,if active and available, the display will be empty.Display of the name and number of the multiplex service being used.Preset stations, buttons 1 to 6.Short press: select the preset radio station.Long press: preset a radio station.Display of "Radiotext" for the current station.Display of the "DAB" or "DAB(FM)" band.Display of the name of the current station.Represents the signal strength for the band being listened to.If the "DAB" radio station being listened to is not available on "FM", the "DAB FM" option is greyed out.Any thumbnail broadcast by the station.The "Video mode" allows the display to be enlarged.
073095008_en_Chap12b_RT6-2-8_ed01-2015RADIOPress "RADIO".DAB (Digital Audio Broadcasting) Digital radioDigital radio provides a higher quality reception and also the graphical display of information for the radio station, by selecting "Video mode" in "Radio favourites" (Options).The different radio multiplex services offer a choice of stations displayed in alphabetical order.Select "Change band" and confirm.Selection "DAB" and confirm.Digital radio - DAB/FM auto tracking"DAB" does not have 100% coverage of the country.When the digital signal is weak, "DAB/FM auto tracking" allows you to continue listening to the same station, by automatically switching to the corresponding analogue "FM" station (if one exists).Change of station in the same "multiplex".Manual search for a "multiplex".Press "RADIO".Select "Options" and confirm.Select "FM/DAB" and confirm.If "DAB/FM auto tracking" is on, there will be a difference of a few seconds in the programme when the system changes to analogue "FM" radio with sometimes a variation in volume.Display of the "DAB" band then becomes "DAB (FM)".When the strength of the digital signal is good again, the system automatically switches back to "DAB".If the "DAB" station you are listening to is not available on "FM" ("DAB/FM" option greyed out), or if "DAB/FM auto tracking" is not on, the sound will be cut when the digital signal is too weak.
083105008_en_Chap12b_RT6-2-8_ed01-2015"MEDIA""Change media""Eject USB device" (if USB connected)"Play mode" ("Normal", "Random", "Random on all media", "Repetition")"Audio settings""Activate / Deactivate AUX input"List of the current media tracks.Go from the list to the menu (left/right).orPress MUSIC.MUSICMEDIAPLAYERSAccess to the "Music media player" menu
083115008_en_Chap12b_RT6-2-8_ed01-2015CD, MP3 CD / USB playerThe audio equipment will only play audio files with ".wma, .aac, .flac, .ogg and .mp3" file extensions and with a bit rate of between 32 Kbps and 320 Kbps.It also supports VBR (Variable Bit Rate) mode.No other type of file (.mp4, .m3u...) can be played.WMA files must be of the standard wma 9 type.The sampling rates supported are greater than 32 KHz.It is advisable to restrict file names to 20 characters, without using of special characters (e.g.: " " ? ; ù) to avoid any playing and displaying problems.In order to be able to play a recorded CDR or CDRW, when recording it is preferable to select the ISO 9660 level 1, 2 or Joliet standard.If the disc is recorded in another format (udf,...), it may not be played correctly.It is recommended that the same recording standard is always used for an individual disc, with as low a speed as possible (4x maximum) for optimum sound quality.In the particular case of a multi-session CD, the Joliet standard is recommended.Information and adviceThe system supports USB mass storage or iPod devices via the USB port (suitable cable not supplied).If a partitioned USB memory key is connected to the system, only the first partition is recognised.Control of the peripheral device is with the audio system controls.The number of tracks is limited to 2000 maximum, 999tracks per folder.If the current consumption at the USB port exceeds 500 mA, the system goes into protection mode and deactivates the port.Other peripherals, not recognised on connection, must be connected to the auxiliary socket using a Jack cable (not supplied).Use only USB memory sticks formatted FAT32 (File Allocation Table).The system does not support the operation of an Apple® player and a USB memory stick connected at the same time.It is recommended that official Apple® USB cables are used to ensure correct operation.MUSICMEDIAPLAYERS
083125008_en_Chap12b_RT6-2-8_ed01-2015Insert the CD in the player, insert the USB memory stick in the USB player or connect the USB peripheral to the USB port using a suitable cable (not supplied).The system builds playlists (in temporary memory), an operation which can take from a few seconds to several minutes at the first connection.Reduce the number of non-music files and the number of folders to reduce the waiting time.The playlists are updated every time the ignition is switched off or connection of a USB memory stick. However, the system memorises these lists and if they are not modified, the loading time will be shorter.Play starts automatically after a period which depends on the capacity of the USB memory stick.Selection of sourceThe SOURCE button on the steering mounted controls allows a direct change to the next media source."CD / CD MP3""USB, iPod""AUX""STREAMING""RADIO"Press MUSIC to display the "MEDIA" menu.Select "Following media source" and confirm.Repeat the operation as many times as necessary to obtain the desired media source (except for radio which is accessible either with SOURCE or RADIO).SourcesMUSICMEDIAPLAYERS
08///////+///3135008_en_Chap12b_RT6-2-8_ed01-2015Selecting a trackPrevious track.Next track.Previous folder.Next folder.Fast forward.Fast backward.Pause: long press on SRC.MUSIC: List of USB or CD tracks or foldersUp or down in the list.Confirm, next menu level.Up one menu level.Long pressLong pressMUSICMEDIAPLAYERS
083145008_en_Chap12b_RT6-2-8_ed01-2015Audio streamingStreaming allows audio files on your telephone to be played via the vehicle's speakers.Connect the telephone: refer to the "USING THE TELEPHONE" section.Select "Audio" or "All" profile.If play does not start automatically, it may be necessary to start the audio playback from the telephone.Control is from the peripheral device or by using the audio system buttons.Once connected in streaming mode, the telephone is considered to be a media source.It is recommended that you activate "Repeat" on the Bluetooth peripheral.MUSICMEDIAPLAYERSConnecting APPLE® playersConnect the Apple® player to the USB port using a suitable cable (not supplied).Play starts automatically.Control is via the audio system.The classifications available are those of the portable device connected (artists / albums / genres / playlists / audiobooks / podcasts).The default classification used is by artist. To modify the classification used, return to the first level of the menu then select the desired classification (playlists for example) and confirm to go down through the menu to the desired track.The "Shuffle tracks" mode on an iPod® corresponds to the "Random" mode on the audio system.The "Shuffle albums" mode on an iPod® corresponds to the "Random all" on the audio system."Shuffle tracks" is restored by default on each connection.The version of software in the audio system may not be compatible with the generation of your Apple® player.
083155008_en_Chap12b_RT6-2-8_ed01-2015MUSICMEDIAPLAYERSUsing the auxiliary input (AUX)JACK/USB audio cable not suppliedConnect the portable device (MP3, WMA player…) to the JACK auxiliary audio socket or USB port using a suitable cable.Press MUSIC to display the "MUSIC" menu.Select "Activate / Deactivate AUX input" and confirm.First adjust the volume of your portable device (to a high level). Then adjust the volume of your audio system.Display and management of the controls are via the portable device.
093165008_en_Chap12b_RT6-2-8_ed01-2015AUDIOSETTINGSThey are accessible by the MUSICbutton in the control panel or by a long press on RADIO according to the source in use.-"Equalizer" (choice of 6 musical ambiences)-"Bass"-"Treble"-"Loudness" (Activate/Deactivate)-"Distribution" ("Driver", "All passengers")-"Le-Ri balance" (Left/Right)-"Fr-Re balance" (Front/Rear)-"Auto. Volume" depending on road speed (Activate/Deactivate)The audio settings (Equalizer, Bass, Treble and Loudness) are different and independent for each sound source.The settings for distribution and balance are common to all sources.The distribution (or spatialisation using the Arkamys© system) of sound is an audio process that allows the audio quality to be adapted to the number of listeners in the vehicle.On-board audio: Arkamys© Sound Staging optimises sound distributionin the the passenger compartment.
103175008_en_Chap12b_RT6-2-8_ed01-2015CONFIGURATIONPress SETUP to display the "Configuration" menu.Select "Choose colour" and confirm to select the screen colour harmony and the map presentation mode:-day mode,-night mode,-automatic day/night mode, according to whether the headlamps are on.Select "Adjust luminosity" and confirm to adjust the screen brightness.Press "OK" to save the changes.The settings for day and night are independent.Select "Display configuration" and confirm.Display configuration
113185008_en_Chap12b_RT6-2-8_ed01-2015SCREENMENUMAP(S)"Navigation - guidance" MENUEnter an addressSelect destinationDirectoryGPS coordinatesJourney leg and routeAdd a stageEnter an addressDirectoryPrevious destinationsOrder/delete journey legsDivert routeChosen destinationGuidance optionsDefine calculation criteriaDelete last destinationsMap managementMap orientationMAIN FUNCTIONOption A1Option A11Option AOption B...Map detailsMove the mapMapping and updatingDescription of risk areas databaseStop / Restore guidance12313322221311222222222211Set parameters for risk areas2Fastest route2Shortest routeDistance/TimeWith tolls222With Ferry2Traffic info2Set speech synthesisFastest routeShortest route332Distance/TimeWith tolls33With FerryTraffic info33333North directionVehicle directionPerspective view
113195008_en_Chap12b_RT6-2-8_ed01-2015Select TMC stationAutomatic TMCManual TMCList of TMC stationsDisplay / Do not display messages"TRAFFIC INFORMATION" MENUGeographic filterRetain all the messagesRetain the messagesAround the vehicleOn the route1222122331SCREENMENUMAP(S)DialDirectory of contactsCallOpenImport"TELEPHONE" MENU12221222221233322211133323223List of the paired peripheralsConnectDisconnectDeleteDelete allPhone functionsRing optionsContact mem. statusDelete calls logBluetooth functionsPeripherals searchRename radiotelephoneHang upDisplay all phone contactsDeleteSearchContacts managementNew contactDelete all contactsImport all the entriesSynchronization optionsDisplay telephone contactsNo synchronizationDisplay SIM card contacts2Cancel2Sort by First name/Name3Cancel
113205008_en_Chap12b_RT6-2-8_ed01-2015SCREENMENUMAP(S)112112222222332221Random on all mediaRepetitionAudio settingsActivate / Deactivate AUX input"MUSIC" MENUChange MediaRead modeNormalRandomAll passengersLe-Ri balanceFr-Re balanceAuto. VolumeUpdate radio listBassTrebleLoudnessDistributionDriver122113333332Equalizer"RADIO" MENUChange WavebandOptionsRDS station trackingFM/DABAudio settingsNoneClassicalJazzRockTechnoVocal2222USB/iPodAUXCDBluetooth streaming222FMDABAM3Activated / Deactivated3Activated / Deactivated
113215008_en_Chap12b_RT6-2-8_ed01-2015233142214422Night modeAuto Day/NightAdjust luminositySet date and time"SETUP" MENUDisplay configurationChoose colourHarmonyCartographyDay modeSpeech synthesis settingGuidance instructions volumeSelect male voice/Select female voice2Select units1Define vehicle parameters** The settings vary according to the vehicle.2Alert log1Trip computer2Status of functions2Français1Select language2English2Italiano2Portuguese2Español2Deutsch2Nederlands22TurkçeCestina22PolskiHrvatski22РусскийHungarianSCREENMENUMAP(S)
3225008_en_Chap12b_RT6-2-8_ed01-2015The following table groups together the answers to the most frequently asked questions concerning your audio system.FREQUENTLYASKEDQUESTIONSQUESTIONANSWERSOLUTIONThe route calculation is not successful.The guidance criteria may conflict with the current location (exclusion of toll roads on a toll motorway).Check the guidance criteria on the Navigation Menu, "Guidance options"\ "Define calculation criteria".I am unable to enter my post code.The system only accepts post codes of up to 7 characters.The POIs do not appear.The POIs have not been selected.Select the POIs in the list of POIs.The risk areas audible warning does not work.The audible warning is not active.Activate audible warnings in the Guidance options menu, "Navigation - guidance", "Set parameters for risk areas".The system does not suggest a detour around an incident on the route.The guidance criteria do not take account of TMC messages.Select the "Traffic info" function in the list of guidance criteria.I receive a Risk area alert which is not on my route.Other than guidance, the system announces all Risk areas positioned in a cone located in front of the vehicle. It may provide an alert for a Risk area located on nearby or parallel roads.Zoom in on the map to view the exact position of the Risk area. Select "On the route" to no longer receive alerts other than guidance or to reduce the time for the announcement.
3235008_en_Chap12b_RT6-2-8_ed01-2015FREQUENTLYASKEDQUESTIONSQUESTIONANSWERSOLUTIONCertain traffic jams along the route are not indicated in real time.On starting, it is several minutes before the system begins to receive the traffic information.Wait until the traffic information is being received correctly (display of the traffic information icons on the map).The filters are too restrictive.Modify the "Geographic filter" settings.In certain countries, only major routes (motorways...) are listed for the traffic information.This phenomenon is normal. The system is dependent on the traffic information available.The altitude is not displayed.On starting, the initialisation of the GPS may take up to 3 minutes to receive more than 4 satellites correctly.Wait until the system has started up completely. Check that there is a GPS coverage of at least 4satellites (long press on the SETUP button, then select "GPS coverage").Depending on the geographical environment (tunnel...) or the weather, the conditions of reception of the GPS signal may vary.This phenomenon is normal. The system is dependent on the GPS signal reception conditions.I am unable to connect my Bluetooth telephone.The telephone's Bluetooth function may be switched off or the telephone may not be visible.-Check that your telephone's Bluetooth function is switched on.-Check in the telephone settings that it is "visible to all".The Bluetooth telephone is not compatible with the system.You can check the compatibility of your telephone on www.peugeot.co.uk (services).The volume of the telephone connected in Bluetooth mode is inaudible.The volume depends both on the system and on the telephone.Increase the volume of the audio system, to maximum if required, and increase the volume of the telephone if necessary.The ambient noise level has an influence on the quality of telephone communication.Reduce the ambient noise level (close the windows, reduce the booster fan speed, slow down, ...).
3245008_en_Chap12b_RT6-2-8_ed01-2015FREQUENTLYASKEDQUESTIONSQUESTIONANSWERSOLUTIONSome contacts are duplicated in the list.The options for synchronizing contacts are synchronizing the contacts on the SIM card, the contacts on the telephone, or both. When both synchronizations are selected, some contacts may be duplicated.Select "Display SIM card contacts" or "Display telephone contacts".Contacts are not shown in alphabetical order.Some telephones offer display options. Depending on the settings chosen, contacts can be transferred in a specific order.Modify the display setting in the telephone directory.The system does not receive SMS text messages.The Bluetooth mode does not permit sending SMS text messages to the system.The CD is ejected automatically or is not played by the player.The CD is inserted upside down, is unplayable, does not contain any audio data or contains an audio format which the player cannot play.-Check that the CD is inserted in the player the right way up.-Check the condition of the CD: the CD cannot be played if it is too damaged.-Check the content in the case of a recorded CD: refer to the information and advice in the "MUSIC MEDIA PLAYERS" section.-The audio system's CD player does not play DVDs.-Some recorded CDs will not be played by the audio system because they are not of the correct quality.The CD has been recorded in a format that is not compatible with the player (udf, ...).The CD is protected by an anti-pirating protection system which is not recognised by the audio system.There is a long waiting period following the insertion of a CD or connection of a USB memory stick.When a new medium is inserted, the system reads a certain amount of data (directory, title, artist, etc.). This may take from a few seconds to a few minutes.This phenomenon is normal.The CD player sound is poor.The CD used is scratched or of poor quality.Insert good quality CDs and store them in suitable conditions.The audio equipment settings (bass, treble, ambiences) are unsuitable.Set the treble or bass level to 0, without selecting an ambience.
3255008_en_Chap12b_RT6-2-8_ed01-2015FREQUENTLYASKEDQUESTIONSQUESTIONANSWERSOLUTIONSome characters in the media information are not displayed correctly while playing.The audio system does not read some types of characters.Use standard characters to name tracks and folders.Playing of streaming files does not start.The peripheral device connected does not support automatic play.Start the playback from the device.The names of tracks and the track length are not displayed on the screen when streaming audio.The Bluetooth profile does not allow the transfer of this information.The quality of reception of the radio station listened to gradually deteriorates or the stored stations do not function (no sound, 87.5Mhz is displayed...).The vehicle is too far from the transmitter used by the station listened to or there is no transmitter in the geographical area through which the vehicle is travelling.Activate the "RDS" function by means of the short-cut menu to enable the system to check whether there is a more powerful transmitter in the geographical area.The environment (hills, buildings, tunnels, basement car parks...) block reception, including in RDS mode.This phenomenon is normal and does not indicate a fault with the audio system.The aerial is absent or has been damaged (for example when going through an automatic car wash or in an underground car park).Have the aerial checked by a PEUGEOT dealer.I cannot find some radio stations in the list of stations received.The station is not received or its name has changed in the list.Some radio stations send other information in place of their name (the title of the song for example).The system interprets this information as the name of the station.The name of the radio station changes.
3265008_en_Chap12b_RT6-2-8_ed01-2015FREQUENTLYASKEDQUESTIONSQUESTIONANSWERSOLUTIONWhen modifying the treble and bass setting, the choice of ambience is cancelled.The selection of an ambience imposes specific treble and bass settings.Modify the treble and bass settings or choose a musical ambience to obtain the desired sound quality.When modifying the ambience, the treble and bass settings are cancelled.When modifying the balance settings, the "Driver" or "All passengers" setting is cancelled.The choice of the "Driver" distribution setting imposes specific balance settings.When modifying the "Driver" or "All passengers" distribution setting, the balance settings are cancelled.There is a difference in sound quality between the different audio sources (radio, CD...).For optimum sound quality, the audio settings for Volume, Bass, Treble, Equalizer and Loudness can be adapted to the different sound sources, which may result in audible differences when changing source (radio,CD...).Check that the audio settings for (Volume, Bass, Treble, Equalizer, Loudness) are adapted to the sources listened to. It is advisable to set the AUDIO functions (Bass, Treble, Fr-Re balance, Le-Ri balance) to the middle position, select the "None", musical ambience and set the loudness correction to the "Active" position in CD mode or to the "Inactive" position in radio mode.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131