Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 5008 2009-2016 Owner's Manual Access Alarm

2Access515008_en_Chap02_ouvertures_ed01-2015AlarmLocking the vehicle with full alarmExterior perimiter protectionThe system detects opening of the vehicle.The alarm is triggered if anyone tries to enter the vehicle by forcing a door, the boot or the bonnet.Interior volumetric protectionThe system detects any variation in the volume in the passenger compartment.The alarm is triggered if anyone breaks a window or moves inside the vehicle.If you wish to leave a pet in the vehicle or a window partially open, deactivate the interior volumetric protection.Anti-tamper functionThe system detects the putting out of service of its components.The alarm is triggered if anyone tries to put the wires of the siren, the central control or the battery out of service.ActivationFSwitch off the ignition and get out of the vehicle.FLock or deadlock the vehicle using the locking button on the remote control.The alarm is activated; the indicator lamp in button A flashes once per second.System which protects and provides a deterrent against the theft of your vehicle. It provides two types of protection, exterior and interior, as well as an anti-tamper function.Do not make any modifications to the alarm system, this could cause malfunctions.If a door, the boot or the bonnet is not fully closed, the vehicle is then not locked, but perimeter monitoring will be active after a period of 45 seconds, at the same time as the volumetric monitoring.In the event of automatic relocking of the vehicle (occurs after an unintentional unlocking followed by a period of 30 seconds without opening a door or the boot), the monitoring system is not reactivated automatically. To reactivate the system, it is necessary to unlock the vehicle and then lock it again using the key or the remote control.DeactivationFUnlock the vehicle using the unlocking button on the remote control.The alarm is deactivated; the indicator lamp in button A switches off.
Access525008_en_Chap02_ouvertures_ed01-2015Reactivation of the interior volumetric protectionFUnlock the vehicle using the unlocking button on the remote control.FRelock the vehicle using the remote control.The alarm is activated again with both types of protection; the indicator lamp in button Aswitches off.Locking the vehicle with exterior protection alarm onlyDeactivation of the interior volumetric protectionFSwitch off the ignition.FWithin ten seconds, press button A until the indicator lamp is on continuously.FGet out of the vehicle.FLock or deadlock the vehicle using the locking button on the remote control.The exterior protection alarm alone remains activated; the indicator lamp in button A flashes once per second.TriggeringThis is indicated by sounding of the siren and flashing of the direction indicators for approximately thirty seconds.After it has been triggered, the alarm is again operational.Failure of the remote controlFUnlock the vehicle using the key in the driver's door lock.FOpen the door; the alarm is triggered.FSwitch on the ignition; the alarm stops.MalfunctionWhen the ignition is switched on, illumination the indicator lamp in button A for ten seconds indicates a siren fault.Have it checked by a PEUGEOT dealer or a qualified workshop.Locking the vehicle without activating the alarmFLock or deadlock the vehicle using the key in the driver's door lock.The direction indicators do not come on.Automatic operation*Depending on the legislation in force in your country, one of these cases may occur:-45 seconds after the vehicle is locked using the remote control, the alarm is activated, regardless of the status of the doors and boot.-2 minutes after the last door or the boot is closed, the alarm is activated.FTo avoid triggering the alarm on entering the vehicle, first press the unlocking button on the remote control.To be effective, this deactivation must be carried out each time the ignition is switched off.If the alarm is triggered ten times in succession, the eleventh time will result in it becoming inactive.If the indicator lamp in button A flashes rapidly, this indicates that the alarm was triggered during your absence. When the ignition is switched on, this flashing stops immediately.To avoid triggering the alarm when washing your vehicle, lock it using the key in the driver's door lock.Do not activate the alarm before disconnecting the battery, otherwise the siren will sound.* Depending on the country of sale.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131