Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 407 2004-2011 Owner's Manual Visibility

574 LIGHTING CONTROL STALK Lighting on With the ignition off, on opening the driver's door an audible signal indi-cates that you have left the lighting on when leaving the vehicle. Switch the lighting off. Direction indicators Dipped/main beam change Pull the stalk fully towards you. Front and rear foglamps (ring B) Turn ring B forwards to switch on and rearwards to switch off. The status is confi rmed by the lamp on the instrument panel. Front foglamps (turn once) Left: downwards. The direction arrow indica-tor lamp fl ashes on the instrument panel. Right: upwards. The direction arrow indica-tor lamp fl ashes on the instrument panel. If you forget to return the di-rection indicator to its normal position, the volume of the audible signal will increase, if you are driving at a speed greater than 40 mph (60 km/h) or if the control stalk is held on for more than 20 seconds. These operate with the sidelamps and the dipped or main beam headlamps. Rear foglamps (turn twice) These operate when the front foglamps are already on. Front and rear lamps (ring A) Turn ring A to the position re-quired. Automatic illumination of headlamps, Lighting off, Sidelamps, Dipped/main beam head-lamps. Model without AUTO lightingModel with AUTO lighting
575 Automatic illumination of headlamps The dipped beam headlamps switch on automatically if the light is poor and when the windscreen wipers operate continuously. They switch off when the light is bright enough or the wind-screen wipers stop. Warning: in foggy weather or in snow, the sunshine sensor can detect suffi -cient light. The lighting will not come on automatically. If necessary, you must switch the dipped beam head-lamps on manually. Activation Manual "Guide-me-home" lighting When you leave your vehicle, the side-lamps and dipped beam headlamps can be left on for a few seconds. When the function is activated, the indicator lamp comes on on the 5-dial instrument panel screen. To deactivate or activate the function, use the "Persona-lisation - confi guration" menu on your multifunction screen. For safety reasons, activation/deactivation of the "Automatic illumination of headlampss" function via the menu must be carried out when stationary. To deactivate or activate the "Automatic guide-me-home lighting" function, use the "Personalisation - confi-guration" menu on your multifunction screen. The duration of the lighting can be set via the "Person-alisation - confi guration" menu of your multifunction screen. Automatic "Guide-me-home" lighting When you leave your vehicle with the automatic illumination of head-lamps activated, the sidelamps and dipped beam headlamps remain on for the duration selected after the igni-tion is switched off. Deactivation When the function is deactivated, the indicator lamp comes on on the 5-dial instrument panel screen. Do not cover the sunshine/brightness sensor, located in the centre of the windscreen. It is used to regulate the air conditioning and for the automatic il-lumination of headlamps. If the sunshine/brightness sensor does not function correctly, the sidelamps and dipped beam headlam-ps come on. Consult a PEUGEOT dealer. Activation: switch off the engine, "fl ash" the headlamps, get out of the vehicle and lock it.
575 Automatic illumination of headlamps The dipped beam headlamps switch on automatically if the light is poor and when the windscreen wipers operate continuously. They switch off when the light is bright enough or the wind-screen wipers stop. Warning: in foggy weather or in snow, the sunshine sensor can detect suffi -cient light. The lighting will not come on automatically. If necessary, you must switch the dipped beam head-lamps on manually. Activation Manual "Guide-me-home" lighting When you leave your vehicle, the side-lamps and dipped beam headlamps can be left on for a few seconds. When the function is activated, the indicator lamp comes on on the 5-dial instrument panel screen. To deactivate or activate the function, use the "Persona-lisation - confi guration" menu on your multifunction screen. For safety reasons, activation/deactivation of the "Automatic illumination of headlampss" function via the menu must be carried out when stationary. To deactivate or activate the "Automatic guide-me-home lighting" function, use the "Personalisation - confi-guration" menu on your multifunction screen. The duration of the lighting can be set via the "Person-alisation - confi guration" menu of your multifunction screen. Automatic "Guide-me-home" lighting When you leave your vehicle with the automatic illumination of head-lamps activated, the sidelamps and dipped beam headlamps remain on for the duration selected after the igni-tion is switched off. Deactivation When the function is deactivated, the indicator lamp comes on on the 5-dial instrument panel screen. Do not cover the sunshine/brightness sensor, located in the centre of the windscreen. It is used to regulate the air conditioning and for the automatic il-lumination of headlamps. If the sunshine/brightness sensor does not function correctly, the sidelamps and dipped beam headlam-ps come on. Consult a PEUGEOT dealer. Activation: switch off the engine, "fl ash" the headlamps, get out of the vehicle and lock it.
576 MANUAL HEADLAMP ADJUSTMENT AUTOMATIC HEADLAMP ADJUSTMENT In cases of malfunction , the warning lamp comes on on the instrument panel screen, ac-companied by an audible sig-nal and a message on the multifunction screen. The system places your head-lamps to the low position. Do not touch the xenon bulbs. Consult a PEUGEOT dealer. Daytime running lamps * On vehicles which are equipped with day-time running lamps, the dipped beam head-lamps come on when the vehicle is started. This indicator lamp comes on on the instrument panel screen. The instruments and controls (multifunction screen, air con-ditioning control panel...) are only lit on switching to the automatic illumination of headlamps mode or when the lighting is switched on manually. * According to country. For vehicles fi tted with halogen bulbs, depending on the load in your vehicle, adjusting the beam of your headlamps is recommended. 0. 1 or 2 people in the front seats. -. 3 people. 1. 5 people. -. Intermediate adjustment 2. 5 people + maximum authorised loads. -. Intermediate adjustment 3. Driver + maximum authorised loads. Initial setting is position 0.When stationary with the ignition on , the system automatically corrects the height of the beam, whatever the load of the vehicle. The driver is then assured of having optimum lighting and not causing a nuisance to other road users.
577 WINDSCREEN WIPER CONTROL STALK Windscreen wiper with intermittent wipe Windscreen wiper with automatic wipe The windscreen wiping must be reactivated if the ignition has been switched off for more than one minute. 2 Fast wipe (heavy rain). 1 Normal wipe (moderate rain). l Intermittent wipe. 0 Off. Single wipe (press downwards). In the Intermittent position, the wiping speed is in proportion to the vehicle speed. 2 Fast wipe (heavy rain). 1 Normal wipe (moderate rain). AUTO Automatic wipe. 0 Off. Single wipe (press downwards). In the AUTO position, no action on your part is necessary. 2 Fast wipe (heavy rain). 1 Normal wipe (moderate rain). I Intermittent wipe. 0 Off. Windscreen wiper with Intermittent and automatic wipe The windscreen wiping must be reactivated if the ignition has been switched off for more than one minute. Automatic, then single wipe (see following page). In the AUTO position, no action on your part is necessary. In the Intermittent position, the wiping speed is in proportion to the vehicle speed.
578 Automatic rain sensitive windscreen wipers Activation REAR WIPER CONTROL (407 SW) Deactivation Do not cover the rain sensor located on the windscreen be-hind the rear view mirror. When using an automatic car wash to wash your vehicle, switch off the ignition or check that the wiper stalk is not in the automatic position. In winter, it is advisable to wait for the windscreen to completely clear of ice before operating the automatic wipers. Automatic rear wiper If the windscreen wipers control is ac-tivated and you engage reverse gear, the rear wiper operates in intermittent mode. Note: if a bicycle carrier is used, deactivate this function by going to the "personalisa-tion - confi guration" menu on the multifunction screen or install a special bicycle carrier approved by PEUGEOT. Turn the ring to the fi rst notch for inter-mittent wiping. The control must be reactivated if the ignition has been switched off.To do this, move the control to any position then return it to the required position. Move the control to position 0 then re-turn it to the AUTO position. An indicator lamp comes on on the in-strument panel screen, accompanied by a message on the multifunction screen. In the AUTO position, the windscreen wipers operate automatically and adapt their speed to the intensity of the rainfall. Control with automatic wiping only In the event of malfunction , the windscreen wipers will operate in in-termittent mode. Contact a PEUGEOT dealer to have the system checked. Control with Intermittent and automatic wiping Manual operation of the wiper stalk in-terrupts the AUTO position, the deacti-vation indicator lamp comes on on the instrument panel screen, accompa-nied by a message on the multifunc-tion screen. Manual operation of the wiper stalk by moving the stalk A up and returning it to position "0" interrupts the AUTOposition, the deactivation indicator lamp comes on on the instrument pan-el screen, accompanied by a message on the multifunction screen.
578 Automatic rain sensitive windscreen wipers Activation REAR WIPER CONTROL (407 SW) Deactivation Do not cover the rain sensor located on the windscreen be-hind the rear view mirror. When using an automatic car wash to wash your vehicle, switch off the ignition or check that the wiper stalk is not in the automatic position. In winter, it is advisable to wait for the windscreen to completely clear of ice before operating the automatic wipers. Automatic rear wiper If the windscreen wipers control is ac-tivated and you engage reverse gear, the rear wiper operates in intermittent mode. Note: if a bicycle carrier is used, deactivate this function by going to the "personalisa-tion - confi guration" menu on the multifunction screen or install a special bicycle carrier approved by PEUGEOT. Turn the ring to the fi rst notch for inter-mittent wiping. The control must be reactivated if the ignition has been switched off.To do this, move the control to any position then return it to the required position. Move the control to position 0 then re-turn it to the AUTO position. An indicator lamp comes on on the in-strument panel screen, accompanied by a message on the multifunction screen. In the AUTO position, the windscreen wipers operate automatically and adapt their speed to the intensity of the rainfall. Control with automatic wiping only In the event of malfunction , the windscreen wipers will operate in in-termittent mode. Contact a PEUGEOT dealer to have the system checked. Control with Intermittent and automatic wiping Manual operation of the wiper stalk in-terrupts the AUTO position, the deacti-vation indicator lamp comes on on the instrument panel screen, accompa-nied by a message on the multifunc-tion screen. Manual operation of the wiper stalk by moving the stalk A up and returning it to position "0" interrupts the AUTOposition, the deactivation indicator lamp comes on on the instrument pan-el screen, accompanied by a message on the multifunction screen.
579 Windscreen and headlamp wash Pull the windscreen wiper stalk towards you. The windscreen wash then the windscreen wipers operate for a fi xed period. The headlamp wash is also activated, if the headlamps are on . When the minimum level of the reservoir is reached, this warning light comes on, ac-companied by an audible signal and a message on the multi-function display. Next time you stop, fi ll the screenwash/headlamp wash reservoir. The warning light comes on each time the stalk is operated, until the reservoir is fi lled. FRONT COURTESY LAMP The courtesy lamp can be deactivated by pressing switch 1 with the door open. The map reading lamps are not affected by this and may be switched on. To re-activate the lamps, press the switch, with the door open. Screenwash/headlamp wash low 1.Courtesy lamp2.Map reading lamps With the key in the ignition on or starting position, operate the relevant switch. The front courtesy lamp comes on when the ignition key is removed, on unlocking the vehicle or on opening one of the doors. It gradually goes off after the ignition has been switched on or when the ve-hicle is locked. Pressing switch 1 turns on the front courtesy lamp. Rear wash-wipe Note: the rear wiper and rear wash-wipe functions are de-activated automatically when the rear screen is opened. Turn the ring beyond the fi rst notch, the wash-wipe then the wiper operate for a set period of time.
579 Windscreen and headlamp wash Pull the windscreen wiper stalk towards you. The windscreen wash then the windscreen wipers operate for a fi xed period. The headlamp wash is also activated, if the headlamps are on . When the minimum level of the reservoir is reached, this warning light comes on, ac-companied by an audible signal and a message on the multi-function display. Next time you stop, fi ll the screenwash/headlamp wash reservoir. The warning light comes on each time the stalk is operated, until the reservoir is fi lled. FRONT COURTESY LAMP The courtesy lamp can be deactivated by pressing switch 1 with the door open. The map reading lamps are not affected by this and may be switched on. To re-activate the lamps, press the switch, with the door open. Screenwash/headlamp wash low 1.Courtesy lamp2.Map reading lamps With the key in the ignition on or starting position, operate the relevant switch. The front courtesy lamp comes on when the ignition key is removed, on unlocking the vehicle or on opening one of the doors. It gradually goes off after the ignition has been switched on or when the ve-hicle is locked. Pressing switch 1 turns on the front courtesy lamp. Rear wash-wipe Note: the rear wiper and rear wash-wipe functions are de-activated automatically when the rear screen is opened. Turn the ring beyond the fi rst notch, the wash-wipe then the wiper operate for a set period of time.
580 REAR COURTESY LAMP (SALOON) REAR READING LAMPS (407 SW) Sill illumination The sill lighting is at the bottom of each door panel. The lamps come on automatically when a door is opened and switch off automatically when all of the doors are closed. Boot light The boot light is located in the right-hand boot trim. It comes on automatically when the boot is opened and switches off auto-matically when the boot is closed. 1.Courtesy lamp2.Map reading lamps With the key in the ignition on or start-ing position, operate the relevant switch. The rear courtesy lamp comes on when the ignition key is removed, on unlocking the vehicle or on opening one of the doors. It gradually goes off after the ignition has been switched on or the vehicle is locked. Pressing switch 1 turns on the rear courtesy lamp. The courtesy lamp can be deactivated by pressing switch 1 with the door open. The map reading lamps are not affected by this and may be switched on. To re-activate the lamps, press the switch, with the door open. With the key in the ignition on or start-ing position, press the corresponding switch. The rear reading lamps come on when the key is removed from the ignition and when the vehicle is unlocked. They switch off gradually when the ig-nition is switched on or when the ve-hicle is locked. Pressing switch 1 switches on the rear reading lamp concerned for ten minutes.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131