Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 407 2004-2011 Owner's Manual Practical Information Wipers / Economy Mode

1010PRACTICAL INFORMATION123 The electrical system of your vehicle is designed to oper-ate with standard or optional equipment. Before installing other electrical equip-ment or accessories on your vehicle, contact a PEUGEOT dealer. PEUGEOT will not accept responsi-bility for the cost incurred in repairing your vehicle or for rectifying the mal-functions resulting from the installation of accessories not supplied and not recommended by PEUGEOT and not installed in accordance with its instruc-tions, in particular when the combined consumption of all of the additional equipment connected exceeds 10 mil-liamperes. The maxi-fuses provide additional pro-tection for the electrical systems. All work must be carried out by a PEUGEOT dealer. CHANGING A WINDSCREEN WIPER BLADE ECONOMY MODE FUNCTION After the engine has stopped, certain electrical functions can be used for a maximum duration of approximately one hour, to prevent discharging of the battery. A fl at battery prevents the en-gine from starting. If the telephone is being used when economy mode starts, it will still be possible to fi nish the call. Placing the wiper blades inthe maintenance position Less than one minute after swit-ching off the ignition, press the windscreen wiper stalk down once to position the blades vertically on the windscreen (maintenance po-sition). Replacing a blade Lift the arm, then unclip the blade and remove it. Fit the new blade and fold down the arm. To reposition the blades, switch on the ignition and operate the windscreen wiper stalk. This period may be signifi -cantly reduced if the battery charge is low. Once the hour is over, a message ap-pears on the multi-function display and the active functions are put on standby. These functions are automatically re-activated when the vehicle is started. As winter approaches, have your bat-tery checked by a PEUGEOT dealer.
1010PRACTICAL INFORMATION122 Engine compartment fuses To access the fuses located in the engine compartment (next to the bat-tery), remove the battery cover and unclip the fuse box cover. Close the fuse box cover carefully and refi t the battery cover when you have fi nished. Fuse N°RatingAFunctions120 Engine management control unit. 215 Horn. 310 Front and rear wash-wipe. 420 Headlamp wash. 515 Engine management actuators (fuel pump, purge canister solenoid valves, ...). 610 Automatic gearbox control unit. 710 Switching and protection unit, intake air fl ow sensor, clutch switch, six-speed automatic gear-box switch, STOP switches, electrochromatic mirror, panoramic roof concealing fl ap controls (407SW). 820 Starter coil. 910 Xenon bulb electronic supply, STOP switch, power steering electropump assembly, four-speed automatic gearbox control unit, automatic gearbox locking relay. 1030 Engine management actuators (ignition coil, solenoid valves, oxygen sensors). 1140 Air conditioning blower or not used. 1230 Windscreen wipers. 1340 Built-in systems interface supply (ignition positive). 1430 Air pump.
1010PRACTICAL INFORMATION123 The electrical system of your vehicle is designed to oper-ate with standard or optional equipment. Before installing other electrical equip-ment or accessories on your vehicle, contact a PEUGEOT dealer. PEUGEOT will not accept responsi-bility for the cost incurred in repairing your vehicle or for rectifying the mal-functions resulting from the installation of accessories not supplied and not recommended by PEUGEOT and not installed in accordance with its instruc-tions, in particular when the combined consumption of all of the additional equipment connected exceeds 10 mil-liamperes. The maxi-fuses provide additional pro-tection for the electrical systems. All work must be carried out by a PEUGEOT dealer. CHANGING A WINDSCREEN WIPER BLADE ECONOMY MODE FUNCTION After the engine has stopped, certain electrical functions can be used for a maximum duration of approximately one hour, to prevent discharging of the battery. A fl at battery prevents the en-gine from starting. If the telephone is being used when economy mode starts, it will still be possible to fi nish the call. Placing the wiper blades inthe maintenance position Less than one minute after swit-ching off the ignition, press the windscreen wiper stalk down once to position the blades vertically on the windscreen (maintenance po-sition). Replacing a blade Lift the arm, then unclip the blade and remove it. Fit the new blade and fold down the arm. To reposition the blades, switch on the ignition and operate the windscreen wiper stalk. This period may be signifi -cantly reduced if the battery charge is low. Once the hour is over, a message ap-pears on the multi-function display and the active functions are put on standby. These functions are automatically re-activated when the vehicle is started. As winter approaches, have your bat-tery checked by a PEUGEOT dealer.
1010PRACTICAL INFORMATION123 The electrical system of your vehicle is designed to oper-ate with standard or optional equipment. Before installing other electrical equip-ment or accessories on your vehicle, contact a PEUGEOT dealer. PEUGEOT will not accept responsi-bility for the cost incurred in repairing your vehicle or for rectifying the mal-functions resulting from the installation of accessories not supplied and not recommended by PEUGEOT and not installed in accordance with its instruc-tions, in particular when the combined consumption of all of the additional equipment connected exceeds 10 mil-liamperes. The maxi-fuses provide additional pro-tection for the electrical systems. All work must be carried out by a PEUGEOT dealer. CHANGING A WINDSCREEN WIPER BLADE ECONOMY MODE FUNCTION After the engine has stopped, certain electrical functions can be used for a maximum duration of approximately one hour, to prevent discharging of the battery. A fl at battery prevents the en-gine from starting. If the telephone is being used when economy mode starts, it will still be possible to fi nish the call. Placing the wiper blades inthe maintenance position Less than one minute after swit-ching off the ignition, press the windscreen wiper stalk down once to position the blades vertically on the windscreen (maintenance po-sition). Replacing a blade Lift the arm, then unclip the blade and remove it. Fit the new blade and fold down the arm. To reposition the blades, switch on the ignition and operate the windscreen wiper stalk. This period may be signifi -cantly reduced if the battery charge is low. Once the hour is over, a message ap-pears on the multi-function display and the active functions are put on standby. These functions are automatically re-activated when the vehicle is started. As winter approaches, have your bat-tery checked by a PEUGEOT dealer.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131