Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 407 2004-2011 Owner's Manual Practical Information Battery

1010PRACTICAL INFORMATION124 To start the vehicle from another battery: - Connect the red cable to the positive (+) terminals of the two batteries, - Connect one end of the green or black cable to the negative (-) ter-minal of the slave battery, - Connect the other end of the green or black cable to an earth point on the broken down vehicle as far as possible from the battery, - Operate the starter, let the engine run, - Wait for the engine to return to idle, then disconnect the cables. BATTERY (LOCATED IN THE ENGINE COMPARTMENT) Disconnecting/Reconnectingthe cables 1. Raise the locking plate A . 2. Position the open clip of the cable on the positive (+) terminal of the battery. 3. Press until the position checking system B tilts. 4. Lock the clip by lowering the lock-ing plate while pressing on the clip. It is advisable to disconnect the battery if the vehicle is not to be used for a period of more than one month. To charge the battery using a battery charger: - Disconnect the battery, - Follow the instructions for use giv-en by the manufacturer the battery charger, - Reconnect starting with the nega-tive (-) terminal, - Check that the terminals and connec-tors are clean. If they are covered with sulphate (white or greenish deposit), disconnect them and clean them. Do not force the plate as lock-ing is not possible if the clip is not positioned correctly. Start the procedure again.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131