Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 407 2004-2011 Owner's Manual Instruments and Controls Service Indicator

126 SERVICE INDICATOR This is a visual reminder of when the next service is due. This service is to be carried out according to the manu-facturer's servicing schedule. Service indicator zero re-set Your PEUGEOT dealer carries out this operation after each service. However, if you carry out the service yourself, the re-set procedure is as follows: Switch off the ignition, Press and hold the trip recorder reset button, Switch on the ignition. The display begins a countdown. When the display shows "=0" , release the button; the spanner disappears . Once an engine oil level indication has been displayed, the display indicates the total and trip distances. If the service is overdue , each time the ignition is switched on and for5 seconds, the distance and the span-ner fl ash. Example : when the ignition is switched on and for 5 seconds, the display in-dicates that the service is overdue by 300 miles/km. The service should be carried out very shortly. Once the servicing and oil level infor-mation has been displayed, the total distance recorder resumes normal op-eration and the spanner remains lit. The point at which a service is due is calculated using two parameters: - the total distance travelled, - the time elapsed since the last ser-vice. The distance remaining may be weighted by the time factor, depen-ding on the user's driving conditions. Operation As soon as the ignition is switched on and for 5 seconds, the spanner sym-bolising the service operations is lit. The trip recorder display shows the distance remaining (in round fi gures) before the next service. Example : when switching on the ig-nition and for 5 seconds, the display shows that 900 miles/km remain be-fore the next service is due. After this operation, if you wish to disconnect the battery, lock the vehicle and wait for at least fi ve minutes, otherwisethe zero re-set will not be registered.
127 Engine oil level indicator When the ignition is switched on, the engine oil level is indicated for approx-imately 5 seconds, after the service information. Dipstick There are 2 level marks on the dipstick: never exceed level A . In position B , top up the level via the oil fi ller cap, using the type of oil suited to your engine. A = max. B = min. Trip recorder zero reset Oil level correct Lack of oil Flashing indicates a lack of oil which may damage the engine. If the lack of oil is confi rmed by check-ing with the dipstick, the level must be topped up. Oil level indicator fault (fl ashing segments) Check the oil level using the dipstick. If the level is correct, the fl ashing indi-cates an engine oil level gauge mal-function. Consult a PEUGEOT dealer. The level observed on the dipstick is only valid if the vehicle is parked on level ground and the engine has been off for more than 15 minutes. The total distance is displayed in zone A of the display and the trip dis-tance in zone B . Distance recorder With the trip distance displayed, press the button for a few seconds.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131