Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 407 2004-2011 Owner's Manual Fittings

6FITTINGS81 INTERIOR FITTINGS This is fi tted with a lock. To open the glove box, lift the handle. The glove box lights when the lid is opened. It is fi tted with three sockets for con-necting video equipment (vehicle fi tted with a 16/9 colour screen), a ventilation nozzle that can be closed by means of a dial, distributing conditioned air at the same temperature as the vents of the passenger compartment. In cold weather, it is advisable to close this nozzle to conserve the ambient air inside the passenger compartment. The glove box permits access to the fascia fuse box. To open the compartment, lift the cover or operate the lever on the left (accord-ing to version). The storage compartment permits ac-cess to the USB socket and the storing of CDs and coins. Rear storage container Closed storage compartment, driver’s side Door tray This permits the storing of maps, tourist guides or a bottle of water. Front ashtray (100 W max) This is fi tted with a lighter socket or 12 volt socket. Press the cover to open the ashtray. To empty the ashtray, after opening, grip the receptacle and remove it. Retractable cup/can holder This is located in front of the front armrest. Press the cover to open the cup/can holder. 12 volt accessories socket (100 W max) This is a lighter type socket, fi tted with a cap. It is supplied with current from the ignition on position. This permits the storing of small ob-jects such as keys, a parking badge or a mobile telephone. Air conditioned glove box Front armrest This is located at the back of the front armrest. To empty it, open it fully, press the upper tab then pull to remove it.
6FITTINGS82 Rear armrest Fitting/Removing the mat Storage compartments There are two storage compartments located in the boot side trim. To gain access to a compartment: turn the two screws to the right and remove the panel. Access to the ski flap To prevent the mat from becom-ing caught under the pedals: - only use mats suited to the fi xings already present in the vehicle. It is essen-tial that these fi xings are used. - never fi t one mat on top of another. The rear armrest consists of two com-partments with a hinged cover. Storage compartment 1 : Lift the cover. Pull the handle down then towards you to open the fl ap. When removing the mat on the driver's side, push the seat as far back as pos-sible and remove the fi xings. When refi tting, position the mat correct-ly on the pin and clip the fi xings. Check that the mat is secured correctly. Cup holder 2 : Fold the second cover forwards.
6FITTINGS83 BOOT FITTINGS (407 SW) 3. Load space cover To remove: Unclip the front ends and remove the load space cover. To install: Position the front ends of the load space cover on its support and press lightly to put it in place. 1. 12V accessories socket (100 W max) and boot lamp This is a cigar lighter type 12 volt sock-et. It is installed on the rear left trim and is supplied from the ignition on position. The boot lamp is controlled by opening the tailgate or rear screen. 4. Stowing rings There are four stowing rings on the boot fl oor to which the luggage retain-ing net can be attached. 2. Storage boxes There are two side storage boxes which can contain: - on the left: a can of oil, a fi rst aid kit, a puncture repair aerosol, - on the right (except when a JBL Hi-Fi system is fi tted): a box of bulbs, a warning triangle (support provi-ded for this purpose), the luggage retaining net.
6FITTINGS84 High load retaining net The high load retaining net can be used behind the front seats (row 1) or behind the rear bench seat (row 2). To install it: fold the rear seat backs, position the high load retaining net roller above the two rails 5 located behind the rear seats (2/3 bench seat). The two notches 6 must be placed above the two rails, slide the two rails 5 in the notches 6 , push the roller (in the direction of the length) from right to left to se-cure it, put the rear seat backs back in place. To use it in row 1 : fold the rear seat backs, open the covers 7 of the corre-sponding upper fi xings, unroll the high load retaining net and position one end of the metal bar in the corresponding fi xing co-ver. Ensure that the hook is seated correctly in the rail located inside the cover 7 , pull the metal bar on the high load retaining net to position the other hook in the second fi xing cover. Note : if it is used behind the front seats, the rear seat backs and cushions must be folded (see section on rear seats).
6FITTINGS85 To use it in row 2 : open the covers 8 of the corre-sponding upper fi xings, from the rear bench seat, unroll the high load retaining net pushing it to detach it from the retaining hooks, position one of the ends of the metal bar of the net in the corre-sponding fi xing cover. Ensure that the hook is seated correctly in the rail located inside the cover 8 , position the other hook in the sec-ond fi xing cover and pull the metal bar towards you. To unfold To fold LOAD SPACE COVER (407 SW)
6FITTINGS85 To use it in row 2 : open the covers 8 of the corre-sponding upper fi xings, from the rear bench seat, unroll the high load retaining net pushing it to detach it from the retaining hooks, position one of the ends of the metal bar of the net in the corre-sponding fi xing cover. Ensure that the hook is seated correctly in the rail located inside the cover 8 , position the other hook in the sec-ond fi xing cover and pull the metal bar towards you. To unfold To fold LOAD SPACE COVER (407 SW)
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131