Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 407 2004-2011 Owner's Manual Driving Cruise Control / Speed Limiter

8DRIVING98 CRUISE CONTROL/SPEED LIMITER Selecting the function Place switch 1 in the CRUISE po-sition. The cruise control is not yet active and no speed has been memorised. The display indicates: Switching the function off Place switch 1 in position 0 or LIMIT to switch the system off. Note: It is possible to acce-lerate and drive momentarily at a speed greater than the memorised speed. The value memorised fl ashes. When the acce-lerator pedal is released, the vehicle will return to the memorised speed. Cancelling the memorised speed If you wish to cancel the memorised speed: Press button 4 or the brake or clutch pedal. The display indicates (e.g. at 70 mph (110 km/h)): Activation/memorising a speed As soon as you reach the chosen speed, press button 2 or 3 . This memorises the speed, which will be maintained automatically. The display indicates (e.g. at 70 mph (110 km/h)): On a steep descent, the cruise control, which does not act on the brakes, is not able to pre-vent the vehicle from exceeding the programmed speed. In no circumstances does the cruise control replace the requirement to respect speed limits, nor does it replace the need for vigilance and responsibility on the part of the driver. We recommend that your feet remain near the pedals. Cruise control function This enables the vehicle to maintain a steady speed programmed by the driver In order for it to be memorised, the vehicle speed must be greater than 25 mph (40 km/h) with at least fourth gear engaged (second gear for the automatic gearbox), with the engine running .
8DRIVING99Note: the speed memorised is cancelled automatically if the vehicle speed is less than 25 mph (40 km/h), or if the manual gearbox is in a gear lower than fourth (second gear for the automatic gearbox) or if the ESP is activated. Operating check In the event of a cruise control malfunc-tion, the memorised speed is erased, the dashes fl ash for a few seconds: Contact a PEUGEOT dealer to have the system checked. Do not use the cruise control on slippery roads or in heavy traffi c. Changing a memorised speed To memorise a speed higher than the previous one, there are two options: Without using the accelerator: press button 3 ; Using the accelerator: exceed the memorised speed until the required speed is reached, press button 2 or 3 . To memorise a speed lower than the previous one: press button 2 ; Short press: +/- 1 mph (1 km/h) Long press: +/- 5 mph (5 km/h) Maintained press: continuous increase or decrease of the value in steps of 5 mph (5 km/h). Recalling the memorised speed After cancellation, press button 4 . Your vehicle will return to the last memo-rised speed. The display indicates (e.g. at 70 mph (110 km/h)): Cancelling the memorised speed Place switch 1 in position 0 or LIMITor switch off the ignition. To prevent the mat from becoming caught under the pedals: - ensure that the mat is positioned correctly, - never fi t one mat on top of another.
8DRIVING100 Selecting the function Place switch 1 in the LIMIT posi-tion. The limiter is not yet active. By default the display indicates: Switching the function off Place switch 1 in position 0 or CRUISE or switch off the ignition to switch the system off. The last speed programmed remains in the memory. Memorising a speed A speed can be memorised without activation of the limiter. Pressing buttons 2 and 3 decreases or increases the speed. Short press: +/- 1 mph (1 km/h) Long press: +/- 5 mph (5 km/h) Maintained press: continuous increase or decrease of the value in steps of 5 mph (5 km/h). Activation/deactivation of the limiter Pressing button 4 activates the limiter, pressing this button again deactivates it. When the limiter is active, the display indicates (e.g. at 70 mph (110 km/h)): On a steep descent or if the driver accelerates sharply, the speed limiter, which does not act on the brakes, is not able to prevent the vehicle from exceeding the programmed speed. In no circumstances does the speed limiter replace the requirement to re-spect speed limits, nor does it replace the need for vigilance and responsibi-lity on the part of the driver. The driver must remain vigilant and stay in complete control of his vehicle. The operations must be car-ried out with the engine run-ning. Speed limiter function This prevents the vehicle speed ex-ceeding the speed programmed by the driver (minimum speed of 18 mph (30 km/h)).
8DRIVING101 Exceeding the programmed speed Additional pressing of the accelera-tor to exceed the programmed speed will have no effect unless the pedal is pressed fi rmly (passing the point of resistance ). The limiter is deactivated temporarily and displays the programmed speed (e.g. at 70 mph (110 km/h)): Note: the speed also fl ashes when the speed limiter can-not prevent the vehicle from exceeding the programmed speed (on a steep descent or in the event of sharp acceleration). To re-activate the limiter, release the accelerator to slow down to a speed below the programmed speed. Operating check In the event of a limiter malfunction, the memorised speed is erased, the dashes fl ash for a few seconds: Contact a PEUGEOT dealer to have the system checked. To prevent the mat from becom-ing caught under the pedals: - ensure that the mat is po-sitioned correctly, - never fi t one mat on top of another.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131