Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 407 2004-2011 Owner's Manual Comfort Programmable Heating

3COMFORT44 PROGRAMMABLE HEATING Programming remote control The heating system programming re-mote control consists of the following buttons and displays: 1. Scrolling functions menu buttons. 2. Function indicator lights: clock, temperature, operating time, pro-grammed time, heater operation, heating management symbols. 3. Digital displays: time, temperature, duration of operation, programmed time or level of heating. 4. Off button. 5. On button. Displaying the functions If a malfunction of the programma-ble heating system occurs, contact a PEUGEOT dealer. The programmable heating operates independently of the engine. When the engine is off, it pre-heats the coolant circuit in order to benefi t from an optimum engine operating temperature from the time the engine is switched on. The programmable heating system is switched on using the long range remote control. Activation can be immediate or deferred by means of a programming function. Displays on the remote control screen Press the buttons 1 in succession to display the functions. The fi rst press of the left-hand or right-hand button displays the time. Next, the left-hand button permits ac-cess to the programming time then to the level of heating (C1 to C5). The right-hand button permits access to the passenger compartment temper-ature then to the duration of operation of the heater if it is to be switched on immediately. The passenger compartment temperature information is only available when the en-gine is off.
3COMFORT45 Once the time has been displayed, by means of the buttons 1 , press buttons 4and 5 simultaneously within 10 seconds. This symbol fl ashes. Setting the time Set the time using the buttons 1 . Press buttons 4 and 5 simultaneously to save it. This symbol is displayed (fi xed). Press button 5 (ON) until the message "OK" appears. When the signal has been received, the message "OK" is displayed along with the duration of operation. The heater starts and this sym-bol is displayed. Immediate activation To deactivate the function, press but-ton 4 (OFF) until the message "OK"appears. When carrying out these oper-ations, if the message "FAIL"appears, the signal has not been received. Repeat the procedure after changing your location. This symbol is switched off. Setting the duration of operation Press the buttons 1 to display the du-ration of operation. This symbol is displayed. Once the duration of operation has been displayed, press buttons 4 and 5simultaneously within 10 seconds. This symbol fl ashes. Set the duration by pressing the but-tons 1 (adjustment in steps of 10 mins and max value 30 mins). Press buttons 4 and 5 simultaneously to save the duration of operation. This symbol is displayed (fi xed). The factory setting value is 30 minutes.
3COMFORT46 You must programme your departure time in order for the system to calculate the op-timum heater start time automatically. Programming the heating Set the time by pressing the buttons 1and press buttons 4 and 5 simultane-ously to save it. Programming the departure time Press the buttons 1 to display the pro-gramming time. This symbol is displayed. Once the programming time has been displayed, press buttons 4 and 5 si-multaneously within 10 seconds. This symbol fl ashes. This symbol is displayed (fi xed). Once the programming time has been displayed by means of the buttons 1 , press button 5 (ON) until the message "OK" appears. Activation - deactivation When the signal has been received, the message "OK" is displayed along with the symbol "HTM" . To deactivate the programming, press button 4 (OFF) until the message "OK" appears. HTM: Heat Thermo Management. The symbol "HTM" is switched off. When carrying out these op-erations, if the message "FAIL"appears, the signal has not been received. Repeat the procedure after changing your location. This symbol is displayed when the heater starts. Switching off the heating Press button 5 (ON). The symbol "HTM" remains on. Changing the level of heating The system offers 5 levels of heating (from the lowest level C1 to the high-est level C5 ). Once the level of heating has been displayed by means of the buttons 1 , press buttons 4 and 5 simultaneously. The letter "C" fl ashes. Set the level of heating by pressing the buttons 1 . Press buttons 4 and 5 simultaneously to save the level selected. The letter "C" is displayed (fi xed). The factory pre-sets are re-placed by the new settings entered. The programmed times are stored until the next time they are changed. When the departure time is acti-vated, the level of heating cannot be changed. The departure time must be deactivated fi rst.
3COMFORT47 Always switch off the programmable heating while fi lling with fuel to avoid any risk of fi re or explosion. To avoid any risk of poisoning and as-phyxiation, the programmable heating must not be used, even for short peri-ods, in an enclosed space such as a ga-rage or workshop which is not equipped with an exhaust gas extraction system. Do not park the vehicle on an infl am-mable surface (dry grass, dead leaves, paper…), there is a risk of fi re. The programmable heating system is supplied by the vehicle's fuel tank. Before use, ensure that the quantity of fuel remaining is suffi cient. If the fuel tank is at the reserve, we strongly ad-vise that you do not programme the heating. Changing the battery The remote control is supplied by a 6V-28L battery, which is supplied. Information on the display indicates when it is time to replace this battery. Unclip the casing then replace the battery. The remote control must then be reini-tialised, see below. As an accessory, your pro-grammable heating can be adapted to pre-heat your vehi-cle's passenger compartment. Reinitialising the remote control If the vehicle's battery is disconnect-ed or the remote control's battery is replaced, the remote control must be reinitialised. After switching on the power, press button 4 (OFF) for 1 second within the next 5 seconds. If the operation has taken place correctly the message "OK" is displayed on the remote con-trol screen. If a problem occurs, the message "FAIL" appears. Repeat the operation. Do not discard the used bat-teries, take them to an ap-proved collection point.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131