Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 407 2004-2011 Owner's Manual Comfort Front Seats

3COMFORT50 FRONT SEATS Manual mode Longitudinal adjustment Lift the control bar and slide the seat forwards or backwards. Driver's seat cushion height and angle adjustment Pump up or down to the required position. Seat back angle adjustment Operate the lever for your comfort.
3COMFORT51 Electric mode Longitudinal adjustment Push the control forwards or back-wards to slide the seat. Driver's seat cushion height and angle adjustment Height: tilt the rear of the control up or down. Tilt: tilt the front of the control up or down. Seat back angle adjustment Tilt the control forwards or backwards for your comfort. The electrical functions of the driver's seat are deactivated one minute after the ignition is switched off. To reactivate them, open the door or switch on the ignition.
3COMFORT52 Head restraint height and angle adjustment Front seat active head restraint This system prevents "whiplash". In the event of a rear impact, the action of the body on the seat back moves the head restraint forwards and up-wards preventing the head from being thrown back. Front armrest Driver's seat lumbar adjustment Heated seats adjustment 0 : Off. 1 : Low. 2 : Medium. 3 : High. The adjustment is correct when the top of the head restraint is aligned with the top of the head of the occupant of the seat. Never drive with the head re-straints removed and stored in the vehicle. This is dangerous and they may be thrown in the event of sharp braking. They must be in place and adjusted correctly. To change the position of the armrest: Lift the handle 1 . The armrest folds forwards and up-wards. To return to the initial position, push the armrest backwards and press it to engage. Operate the lever to obtain the correct position. To raise or lower the head restraint, pull it forwards then slide it. To tilt the head restraint, tilt the lower part forwards or backwards. To remove the head restraint, move it almost to the highest position, lift the tab using a coin and pull it forwards and upwards at the same time. To refi t the head restraint, engage the stalks in the holes keeping in line with the seat back. With the engine running, turn the dial. The temperature of the seat is regu-lated automatically.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131