Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 407 2004-2011 Owner's Manual Comfort Automatic Air Conditioning

3COMFORT35 For even air distribution, take care not to obstruct the exterior air intake grille located at the bottom of the wind-screen, the vents, the air outlets under the front seats and the air extractor lo-cated behind the fl aps in the boot. In certain cases of particularly arduous use (towing the maximum load on a steep gradient in hot weather), cutting off the air conditioning permits recov-ery of the engine power and therefore improvement of the towing capacity. Close the windows to benefi t from the full effectiveness of the air conditioning. Ensure that the passenger compart-ment fi lter is in good condition. Have the fi lter elements replaced periodical-ly. If you drive in a dusty environment, replace it twice as often. The air conditioning system does not contain chlorine and is not harmful to the ozone layer. Operate the air conditioning system for 5 to 10 minutes, once or twice a month, to keep it in perfect working order. The water formed by the air conditioning condensation is discharged via an open-ing provided for this purpose. Therefore, a puddle of water may form underneath the vehicle when stationary. If the system does not produce cold air, do not use it and contact a PEUGEOT dealer. 1. Centre panel vents. 2. Adjustment of the glove box air fl ow (see section"Interior layout"). 3. Air outlet to passenger footwells. 4. Two ventilation vents at the rear at the base of the centre console be-tween the passengers. 5. Side vents. 6. Front windows demisting/defrosting vents. 7.Windscreen demisting/defrosting vents. 8. Sunshine sensor. 9. Air diffuser grille. AUTOMATIC AIR CONDITIONING REGULATION Use of the automatic regulation of the air conditioning is recommended. It per-mits automatic and optimised control of all of the following functions: air fl ow, passenger compartment temperature and air distribution, by means of vari-ous sensors, so preventing the need for you to change your reference set-tings other than the value displayed. Air diffuser The air diffuser grille, located at the top of the centre console, signifi cantly im-proves distribution and fl ows and pre-vents air currents, while maintaining an optimum temperature inside the pas-senger compartment. Do not cover the sunshine sensor 8 . It is required for regulation of the air conditioning. Advice on operation To obtain even ventilation, avoid closing the air diffuser grille 9 . In hot weather, in order to obtain in-tense ventilation, you can close the air diffuser grille and use vents 1 and 5 only. If, when the vehicle has been parked in the sun for a long time, the interior temperature remains very high, do not hesitate to ventilate the passenger compartment for a few minutes.
3COMFORT36 DIGITAL AIR CONDITIONING (MONO-ZONE) Mono-zone: this is the overall regula-tion of the temperature, distribution and fl ow in the passenger compartment. Control by the Auto programme Automatic programme - comfort (1) Press the "AUTO" button. The indicator lamp comes on. The "AUTO" symbol is displayed on the multifunction screen. Depending on the level of comfort selected, the system controls the air distribution, fl ow, temperature and intake of air in order to pro-vide comfort and an adequate circulation of air in the passenger compartment. You do not have to make any adjustments. Press the right or left arrow to change it. Adjustment of the temperature (2) To prevent too great a distri-bution of cold air when the en-gine is cold, the ventilation will only reach its optimum level progressively. The symbols and messages associated with the digital air conditioning controls appear on the multifunction screen. The value indicated on the display cor-responds to a level of comfort and not to a temperature in degrees Celsius or Fahrenheit, depending on the screen confi guration. A setting around the value 21 makes it possible to obtain optimum comfort. However, depending on your require-ments, a setting between 18 and 24 is usual.
3COMFORT37 Manual control It is possible to adjust one or more functions manually, while leaving the other functions in automatic mode. Switching to manual mode may result in discomfort (temperature, humidity, odour, condensation) and is not ad-vantageous (comfort). To return to automatic mode, press the "AUTO" button. Blower (3) Air fl ow Turn the dial 3 to the right to increase the air fl ow or to the left to reduce it. Switching off the ventilation Turn the dial 3 to the left until the fl ow of air stops. Adjustment of air distribution (4) Successive or continuous pressure on button 4 enables you to direct the fl ow of air. The "AUTO" button indicator lamp is switched off. The symbol (arrows) corresponding to the chosen direction is displayed on the multifunction screen. Windscreen and front side windows. Front and rear ventilation. Front and rear footwells. AUTO Automatic distribution. Front visibility control (5) In certain cases, the comfort pro-gramme may not be suffi cient to dem-ist or defrost the windows (humidity, several passengers, ice). In this case, select the front vis-ibility programme in order to clear the windows quickly. The indicator lamp comes on. It controls the air conditioning, air fl ow and intake and distributes the ventila-tion to the windscreen and front side windows. The front visibility control symbol is displayed on the multifunction screen. Once the screen is clear, press button 1 to return the system to the comfort setting. To reactivate the air conditioning: Press button 1 . On entering the vehicle, the interior temperature may be much colder (or warmer) than is comfortable. There is no need to change the temperature dis-played in order to obtain rapidly the level of comfort required. The automatic regulation of the air conditioning settings is used to correct the temperature difference as quickly as possible. The "AUTO" button indicator lamp is switched off. The air fl ow symbol (fan) is displayed on the multifunction screen and is fi lled according the value selected. To prevent condensation and dete-rioration of the quality of the air in the passenger compartment, ensure that an adequate fl ow of air is maintained. The "OFF" symbol is displayed on the multifunction screen. This action switches off the display and the indicator lamps. It deactivates all of the system's func-tions, with the exception of the rear screen demisting. The temperature-related comfort is no longer controlled (temperature, humid-ity, odour, condensation). Avoid driving for too long with the air conditioning off.
3COMFORT38 Intake of exterior air/Recirculation of interior air (6) This function enables you to isolate the passenger compartment from ex-terior fumes and odours. Press button 6 several times to set the air intake mode, the indica-tor lamp which corresponds to the mode set comes on at your prefe-rence: - intake of exterior air. Forced ex-terior air intake mode. - recirculation of the air inside the passenger compartment. The indicator lamp for the mode set comes on. Prolonged opera-tion in interior air recirculation mode may result in the formation of condensation and deterioration of the quality of the interior air. Do not drive in air recirculation mode for prolonged periods, ex-cept in truly exceptional atmo-spheric conditions. The message associated with the setting is displayed on the multifunction screen. Press button 6 to return to auto-matic control of the air intake. The two indicator lamps are switched off. For your comfort, when the igni-tion is switched off, the settings are stored until it is switched on again. Rear screen demisting (7) The heated rear screen operates inde-pendently of the air conditioning system. Press button 7 , with the engine running, to demist the rear screen and the door mirrors. The indicator lamp comes on. Demisting is switched off automatical-ly to prevent an excessive consump-tion of current and depending on the ambient temperature. It may be stopped by pressing button 7again or when the engine is switched off. However, demisting resumes if the en-gine is switched on again within one minute. Switch off the rear screen and door mirror demisting when not needed as lowering current consumption reduces fuel consumption.
3COMFORT39 "AIR CON" menu Press the "MENU" but-ton for access to the main menu, then confi rm. The "Main menu" appears on the multifunction screen. Select the Air Conditioning icon using the navigator buttons. The "Air Conditioning" menu ap-pears on the multifunction screen as the main display. Deactivation of the air conditioning (AC-OFF) Additional heating * Vehicles which are fi tted with an HDI engine may be equipped with auto-matic additional heating to improve your comfort. When the engine is idling or when the vehicle is stationary, a high-pitched whistling noise and the emission of a small amount of smoke and odour is normal. Deactivation may result in discomfort (temperature, humidity, odour, con-densation). The symbol "AC OFF" is displayed on the multifunction screen. There is a risk that the temperature setting value may not be reached and you risk having condensation on the windows. You can cancel the deactivation by pressing the "AUTO" button on the air conditioning control panel. * According to country.
3COMFORT DIGITAL AIR CONDITIONING (DUAL-ZONE) Dual-zone: this is the differentiated regulation of the temperature and air distribution on the driver's side and the front passenger's side. The driver and front passenger can each adjust the temperature and the distribution of the air to suit their re-quirements. Control by the Auto programme Automatic programme - driver and passenger comfort (1) Press the "AUTO" button. The indicator lamp comes on. The "AUTO" symbol is displayed on the multifunction screen. Adjustment of the temperature on the driver's side (2) Adjustment of the temperature on the passenger's side (3) Press the up or down arrow to change the temperature on the driver's side 2or passenger's side 3 . The value indicated on the display cor-responds to a level of comfort and not to a temperature in degrees Celsius or Fahrenheit, depending on the screen confi guration. A setting around the value 21 makes it possible to obtain optimum comfort. However, depending on your require-ments, a setting between 18 and 24 is usual. To prevent too great a distri-bution of cold air when the en-gine is cold, the ventilation will only reach its optimum level progressively. The symbols and messages associ-ated with the digital air conditioning controls appear on the multifunction screen. Depending on the level of comfort selected, the system controls the air distribution, fl ow, temperature and intake of air in order to pro-vide comfort and an adequate circulation of air in the passenger compartment. You do not have to make any adjustments.
3COMFORT41 Blower (4) Air fl ow Turn dial 4 to the right to increase the air fl ow or to the left to reduce it. Turn the dial 4 to the left until the fl ow of air stops. Switching off the ventilation Adjustment of the driver's air distribution (5) Successive or continuous pressure on button 5 or 6 enables you to direct the fl ow of air on the driver's side or on the passenger side independently. The "AUTO" button indicator lamp is switched off. The symbol (arrows) corresponding to the chosen direction 5 or 6 is displayed on the multifunction screen. Windscreen and front side windows. Front and rear ventilation. Front and rear footwells. AUTO Automatic distribution. Adjustment of the passenger's air distribution (6) Manual control It is possible to adjust one or more functions manually while leaving the other functions in automatic mode. Switching to manual mode may result in discomfort (temperature, humidity, odour, condensation) and is not ad-vantageous (comfort). To return to automatic mode, press the "AUTO" button. On entering the vehicle, the interior temperature may be much colder (or warmer) than is comfortable. There is no need to change the temperature dis-played in order to obtain rapidly the level of comfort required. The automatic regulation of the air conditioning settings is used to correct the temperature difference as quickly as possible. To reactivate the air conditioning: Press button 1 . The "AUTO" button indicator lamp is switched off. The air fl ow symbol (fan) is displayed on the multifunction screen and is fi lled according to the setting. To prevent condensation and dete-rioration of the quality of the air in the passenger compartment, ensure that an adequate fl ow of air is maintained. The "OFF" symbol is displayed on the multifunction screen. This action switches off the display and the indicator lamps. It deactivates all of the system's func-tions, with the exception of the rear screen demisting. The temperature-related comfort is no longer controlled (temperature, humid-ity, odour, condensation). Avoid driving for too long with the air conditioning off.
3COMFORT42 Front visibility control (7) In certain cases, the comfort pro-gramme may not be suffi cient to dem-ist or defrost the windows (humidity, several passengers, ice). In this case, select the front visibi-lity programme in order to clear the windows quickly. The indicator lamp comes on. It controls the air conditioning, air fl ow and intake and distributes the ventila-tion to the windscreen and front side windows. The front visibility control symbol is displayed on the multifunction screen. Once the screen is clear, press but-ton 1 to return the system to the comfort setting. Intake of exterior air/Recirculation of interior air (8) This function enables you to isolate the passenger compartment from ex-terior fumes and odours. Press button 8 several times to set the air intake mode, the indica-tor lamp which corresponds to the mode set comes on at your prefe-rence: - intake of exterior air. Forced ex-terior air intake mode. - recirculation of the air inside the passenger compartment. The indicator lamp which corre-sponds to the mode set comes on. Prolonged operation in inte-rior air recirculation mode may result in the formation of con-densation and deterioration of the quality of the interior air. Do not drive in air recirculation mode for prolonged periods, ex-cept in truly exceptional atmo-spheric conditions. The message associated with the control is displayed on the multifunction screen. Press button 8 to return to auto-matic control of the air intake. The indicator lamps are switched off. For your comfort, when the igni-tion is switched off, the settings are stored until it is switched on again. Rear screen demisting (9) The heated rear screen operates inde-pendently of the air conditioning system. Press button 9 , with the engine running, to demist the rear screen and the door mirrors. The indicator lamp comes on. Demisting is switched off automatically to avoid an excessive consumption of current and according to the ambient temperature. It may be stopped by pressing button 9again or when the engine is switched off. However, the demisting resumes if the engine is switched on again within one minute. Switch off the rear screen and exte-rior mirrors demisting when no longer needed as lowering current consump-tion reduces fuel consumption.
3COMFORT43 Deactivation of the air conditioning (A/C-OFF) Deactivation or activation of the simultaneous Left-Right control Activation of this function transfers the driver's settings to the passenger. Deactivation of this function allows a return to the independent driver/pas-senger settings. Any manual action on button 4 or 6cancels the simultaneous confi gura-tion setting. "AIR CON" menu Press the "MENU" but-ton for access to the main menu, then confi rm. The "Main menu" appears on the multifunction screen. Select the Air Conditioning icon using the navigator buttons. The "Air Conditioning" menu ap-pears on the multifunction screen as the main display. Additional heating * Vehicles which are fi tted with an HDI engine may be equipped with auto-matic additional heating to improve your comfort. When the engine is idling or when the vehicle is stationary, a high-pitched whistling noise and the emission of a small amount of smoke and odour is normal. * According to country. Deactivation may result in discomfort (temperature, humidity, odour, con-densation). You can cancel the deactivation by pressing the "AUTO" button on the air conditioning control panel.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131