Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 407 2004-2011 Owner's Manual Checks Levels

9CHECKS111 CHECKING THE LEVELS These are normal maintenance opera-tions which keep your vehicle in good working order. Obtan advice from the PEUGEOT dealer network or from the Warranty and Maintenance Record provided with the vehicle. If you have to remove/refi t the engine style cover, handle it with care to avoid damaging the fi xing clips. Dipstick There are two marks on the dipstick: A = maximum Never fi ll past this mark. B = minimum To maintain the reliability of engines and emission control systems, the use of additives in engine oil is prohibited. Oil level Check the level regularly and top up between changes. Check the level with the vehicle level, the engine having been off for more than 15 minutes, using the dipstick. Oil change It is essential that this is carried out at the intervals specifi ed and the viscosity of the oil chosen must meet the require-ments laid down in the manufacturer's servicing schedule. Ask for advice from the PEUGEOT dealer network. Note : avoid used oil coming into pro-longed contact with the skin. Empty the used oil into the containers provid-ed for this purpose in the PEUGEOT dealer network (France) or take it to an approved recycling centre. system is pressurised, wait for at least one hour after the engine has stopped before carrying out any work. Oil filter Replace the fi lter regularly in accor-dance with the recommendations of the servicing schedule. Brake fluid change Use the fl uid recommended by the manufacturer, which fulfi ls the DOT4 standard. It is essential that the brake fl uid is changed at the intervals specifi ed in the manufacturer's servicing schedule. Note : avoid all contact with the skin; the brake fl uid is harmful to health and is very corrosive. Used oil Power steering reservoir Use the fl uid recommended by the manufacturer. Open the reservoir, with the engine at ambient temperature. The level should always be above the MIN. mark and close to the MAX. mark. Cooling system Screenwash and headlamp wash level To ensure optimum cleaning and avoid freezing, this fl uid should not be topped up or replaced with plain water. Slacken the cap by two turns to release the pressure to pre-vent any risk of scalding. When the pressure has dropped, re-move the cap and top up the level. Note : the coolant does not need to be changed. Use the fl uid recommended by the manufacturer. When the engine is warm, the temperature of the coolant is controlled by the engine fan. As this fan can operate with the ignition key removed and because the cooling Do not dispose of used oil, brake fl uid or coolant into drains or onto the ground. Take care when working un-der the bonnet, as some parts of the engine can be very hot (risk of burns).
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131