Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 407 2004-2011 Owner's Manual Checks Checks (Battery, Filter, Brake)

9CHECKS112 CHECKS At the start of winter, have your battery checked by a PEUGEOT dealer. Have the fi lter elements replaced regularly. If you drive in dusty conditions, change them twice as often. Air filter and passenger compartment filter Particle emission filter (Diesel) It is essential that the particle emission fi lter is maintained in accordance with the manufacturer's servicing schedule, by a PEUGEOT dealer. Note : following prolonged operation of the vehicle at very low speed or at idle, you may, in exceptional circum-stances, notice emissions of water va-pour at the exhaust on acceleration. This does not have any effect on the performance of the vehicle or the en-vironment. On vehicles which are fi tted with a par-ticle emission fi lter, the cooling fan may operate after the vehicle has stopped, even when the engine is cold. Where the parking brake trav-el is too great or there is a re-duction in the performance of the system, the parking brake should be adjusted. Have the system checked by a PEUGEOT dealer. Parking brake Disc wear status For any information relating to check-ing disc wear, contact a PEUGEOT dealer. FUEL SUPPLY CUT-OFF (PETROL) * As a safety precaution, in certain cir-cumstances the fuel supply to the en-gine is cut off. To re-establish the fuel supply: RUNNING OUT OF FUEL (DIESEL) If you should run out of fuel, it is ne-cessary to prime the fuel system. The priming pump and the bleed screw are located under the bonnet (see cor-responding illustration in the technical information section): 1.6 litre 16V HDI engine - fi ll the fuel tank with at least fi ve li-tres of diesel, - squeeze and release the manual priming pump until fuel appears in the transparent pipe, - operate the starter until the engine starts. 2 litre 16V HDI engine - fi ll the fuel tank with at least fi ve li-tres of diesel, - unscrew the bleed screw, - squeeze and release the manual priming pump until diesel is seen escaping via the bleed screw, - retighten the bleed screw, - operate the starter until the engine starts. Brake pad wear depends on the style of driving, in particu-lar for vehicles which are used in town, over short distances. Brake pads It may be necessary to check the brake pads for wear, even between services. * According to version. To ensure the best perfor-mance from components as important as the power steer-ing and the braking system, the manufacturer selects and offers specifi c products, only use products recommended by PEUGEOT. Battery To prevent damage to the electrical units, high pressure washing of the en-gine compartment is strictly prohibited . press the red button on the angle of the front right-hand suspension housing, under the bonnet.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131