Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 407 2004-2011 Owner's Manual Access Remote Control Key

4ACCESS Using the key Lock the vehicle (the direction indi-cators come on for approximately two seconds). Turning the key again within fi ve seconds deadlocks the vehicle (the direction indicators come on for approximately two seconds). REMOTE CONTROL KEY The key allows you, from the driver's side, to lock or unlock the doors, the boot and the fuel fi ller fl ap and fold and unfold the door mirrors and in-dependently it allows you to open or close the glove box, lock or unlock the access to the boot via the rear seats (407 Saloon) and switch on the igni-tion. The remote control has the same functions as the key as well as partial opening of the boot (Saloon) or the rear screen (407SW). It is part of the key and is used for re-mote locking and unlocking. If one of the doors or the boot is open, the central locking does not work. Unlocking and partial opening of the boot (saloon) or rear screen (407SW) Press and hold button D . This action also unlocks the doors. Unfolding/folding the key To unfold or fold the key, press button A . Locking Press button B . The direction indicators come on for approximately two seconds and the door mirrors fold. Press and hold button B to close the windows and sunroof automatically in addition to locking. Unlocking Press button C . The direction indicators fl ash rapidly and the door mirrors unfold. The "Folding of the door mirrors" func-tion can be deactivated by a PEUGEOT dealer. Permanent locking of the boot (saloon) Deadlocking This renders the external and internal door controls inoperative. Do not operate the deadlocking function if there is anyone inside the vehicle. Note: if the vehicle is locked and unlocking is activated inadvertently without a door being opened within the next 30 seconds, the vehicle will lock au-tomatically. This function can be acti-vated or deactivated via the "personalisation - confi gu-ration" menu and "Defi ne the vehicle parameters" on the multifunction screen. Press button D on the remote control key. This will unlock the boot only.
4ACCESS62 Using the remote control Pressing button B locks the vehicle (the direction indicators come on for approximately two seconds). A second press within fi ve seconds deadlocks the vehicle (the direction indicators come on for approximately two seconds). LOCKING/UNLOCKING FROM THE INSIDE MANUAL LOCKING (EMERGENCY MODE) Automatic central locking ofthe doors The doors can lock automatically while driving (speed above 6 mph[10 km/h]). Press and hold the button to activate or deactivate this function. Key in ignition A buzzer sounds on opening the dri-ver's door, if the key has been left in the ignition. LOCATING YOUR VEHICLE To locate your vehicle, if you have locked or deadlocked it, in a car park: press button B on the remote con-trol, the courtesy lamps come on and the direction indicators fl ash for a few seconds. Note: driving with the doors locked may make access to the passenger compartment by the emergency services more diffi cult in an emergency. If the vehicle is deadlocked, the button is not active. In this case, use the key or the re-mote control to unlock. Press the button. This allows the doors and the boot to be locked or unlocked. Driver's door Insert the key in the lock to lock or unlock the door. Passenger doors To lock, insert the key in the control located on the edge of the door then turn to the right.
4ACCESS CHANGING THE REMOTE CONTROL BATTERY Battery ref.: CR1620/3 volts. To change the battery, unclip the casing using a coin at the notch. REINITIALISATION Switch off the ignition. Switch the ignition on again. Press the remote control locking but-ton immediately for a few seconds. Switch off the ignition and remove the remote control key from the ig-nition lock. The remote control is now working again. If the remote control does not work after the battery has been changed, reinitialise the remote control. ELECTRONIC ENGINE IMMOBILISER Electronic engine immobiliser indicator lamp It is accompanied by a message on the multi-function screen. Your vehicle will not start. Consult a PEUGEOT dealer. This locks the engine control sys-tem as soon as the ignition has been switched off and therefore prevents starting of the vehicle by anyone who does not have the key. The ignition key has an electronic chip which has a special code. When the ig-nition is switched on, the code must be recognised for starting to be possible. If the system does not function correct-ly, the following indicator lamp comes on: Remote control The high frequency remote control is a sensitive system; do not operate it while it is in your pocket as there is a possibility that it may unlock the vehi-cle, without you being aware of it. Do not repeatedly press the buttons of your remote control out of range and out of sight of your vehicle. You run the risk of stopping it from working and the remote control would have to be reini-tialised. The remote control does not operate when the key is in the ignition, even when the ignition is switched off, ex-cept for reinitialisation. Locking the vehicle Driving with the doors locked may make access to the passenger com-partment by the emergency services more diffi cult in an emergency. As a safety precaution (with children on board), remove the key from the ignition when you leave the vehicle, even for a short time. Lost keys Visit a PEUGEOT dealer with the vehicle's V5 registration document and your personal identifi -cation documents. The PEUGEOT dealer will be able to re-trieve the key code and the transponder code required to order a replacement key.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131