Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2024-2025 Practical information Load reduction mode

telematics system, dipped beam headlamps orcourtesy lamps.Selecting the modeA confirmation message is displayed whenenergy economy mode is entered, and the activefunctions are placed on standby.If a telephone call is in progress at thetime, it will be maintained for around 10minutes via the audio system’s hands-freesystem.Exiting the modeThese functions are automatically reactivatedthe next time the vehicle is used.To restore the use of these functionsimmediately, start the engine and let it run:– For less than 10 minutes, to use the equipmentfor approximately 5 minutes.– For more than 10 minutes, to use theequipment for approximately 30 minutes.Let the engine run for the specified duration toensure that the battery charge is sufficient.To recharge the battery, avoid repeatedly orcontinuously restarting the engine.A flat battery prevents the engine fromstarting.For more information on the 12 Vbattery/ Accessories battery, refer to thecorresponding section.Load reduction modeThis system manages the use of certainfunctions according to the level of chargeremaining in the battery.When the vehicle is being driven, theload reduction function temporarily deactivatescertain functions, such as the air conditioningand the heated rear screen.The deactivated functions are reactivatedautomatically as soon as conditions permit.BonnetWork in the engine compartmentTake care with objects or clothing thatcould be caught in the blades of the coolingfan or in certain moving components - risk ofstrangulation and serious injury!Petrol or Hybrid vehicles (Stop & Start/e-Auto mode)Before doing anything under the bonnet, it isessential to switch off the ignition to avoid anyrisk of the engine restarting automatically.Rechargeable hybrid orelectric vehiclesBefore any work is carried out under thebonnet, it is essential to switch off the ignition,check that the READY indicator lamp is off onthe instrument panel, disconnect the chargingconnector nozzle if it is connected and waitfor 4 minutes - risk of serious injury!The location of the interior bonnet releaselever prevents the bonnet being openedwhen the left-hand front door is closed.After the second unlocking, the bonnet isno longer held. Be careful not to open thebonnet suddenly in windy conditions or whena vehicle is approaching - Risk of damage tothe bonnet and hinges!An audible signal supplements the alert(warning lamp and message) if the speed ishigher than 4 mph (6 km/h) and the bonnet isnot properly closed.Immediately get out of the vehicle and,depending on the situation, raise and lowerthe bonnet to close it, or raise the bonnetcompletely to secure it with its stay.When the engine is hot, handle theexterior safety catch and the bonnet staywith care (risk of burns), using the protectedarea.When the bonnet is open, take care not todamage the safety catch.Do not open the bonnet under very windyconditions.Practical information194
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131