Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2024-2025 Practical information Charging the traction battery (Electric)

It is also possible to monitor the chargingprogress using the MYPEUGEOT APPapplication.For more information on Remotelyoperable additional functions, refer to thecorresponding section.As a safety measure, the engine will notstart if the charging cable is plugged intothe connector on the vehicle. A warning isdisplayed on the instrument panel.Cooling the traction batteryThe cooling fan in the engine compartmentcomes on during charging to cool the on-board charger and the traction battery.Low charging / DrivingDriving when the charge level of thetraction battery is too low can lead to thevehicle breaking down and can lead toaccidents or serious injuries. ALWAYS makesure the traction battery has a sufficientcharge level.Low charging / ParkingIf the outside temperature is negative, itis recommended not to park your vehicleoutside for several hours at a low charging(less than 20%).Vehicle in storage for more than 1monthIn the event of a long period of non-useof the vehicle (beyond 4 weeks) withoutthe possibility of charging when restarting,the self-discharge may make it impossibleto restart if the traction battery charge levelis a low or very low, especially at negativeambient temperatures. ALWAYS make surethat the traction battery has a charge between20% and 40% if you do not plan to use yourvehicle for several weeks.Do not connect the charging cable.Always park the vehicle in a place withtemperatures between -10°C and 30°C(parking in a place with extreme temperaturescan damage the traction battery).Disconnect the cable from the (+) terminalof the accessory battery in the enginecompartment.Connect a 12 V battery charger to the (+)and (-) terminals of the accessory batteryabout every 3 months in order to recharge theaccessory battery and maintain an operatingvoltage.Refer to the 12 V battery/Accessorybatteries section for the batterydisconnection procedure.Practical information1857Accelerated charging (mode 3)The end of charging is confirmed by theaccelerated charging unit (Wallbox) and whenthe greencharging indicator lamp in the flapcomes on fixed.►After disconnection, replace the nozzle on tothe charging unit and close the charging flap.Charging the tractionbattery (Electric)PrincipleFor more information, refer tothe General recommendations onelectrified vehicles and the Specificrecommendations on rechargeable hybridor electric vehicles.To recharge, connect the vehicle to a domesticelectricity supply (domestic or acceleratedcharging) or to a fast public charger (superfastcharging).For a full charge, follow the desired chargingprocedure without pausing it, until it endsautomatically. Charging can be either immediateor deferred (except fast public charger, mode 4).You can stop domestic or accelerated chargingat any time by unlocking the vehicle andremoving the nozzle. For superfast charging,refer to the fast public charger.For more information on the charging displayson the Instrument panel and the Touch screen,refer to the corresponding section.
After chargingCheck that the charging flap is closed.Do not leave the cable connected to thedomestic power socket - risk of short-circuitor electrocution in the event of contact with orimmersion in water!For superfast chargingBefore chargingCheck that the fast public charging stationand its charging cable are compatible with thevehicle.If the exterior temperature is below:– 0°C, charging times may be extended.– -20°C, charging is still possible, butcharging times may be extended even further(the battery has to be heated first).After charging Check that the charging flapis closed.Deferred chargingBy default, the deferred charging start time is setto be around midnight.Depending on equipment, this time can bechanged.Settings►In the Energy touch screen appli-cation, select the Charging tab.►Set the charging start time.►Press OK to confirm.The setting is saved in the system.You can also programme the defer-red charging function using a smart-phone, via the MYPEUGEOT APPapplication.For more information on Remotely operableadditional functions, refer to the correspondingsection.Battery Charging Limit80%It is also possible to activate/deactivate alimitation of the traction battery charging to 80%of its capacity.80% charging is recommended for daily use. Itmay improve performance and durability.Full charging is recommended for a long trip andwill take longer.Activation80% charging limit, when activated, is onlyapplied to modes 2 and 3.Deferred charging is only possible withmodes 2 and 3.►After programming the deferred charging,connect the vehicle to the desired chargingequipment.►Lock the vehicle.►Press this button in the charging flap withinone minute to activate the system (confirmedPractical information186PrecautionsFor domestic or accelerated chargingBefore chargingDepending on the context:► Have a professional check that theelectrical system to be used complies withapplicable standards and is compatible withthe vehicle.► Have a professional electrician installa dedicated domestic power socketor accelerated charging unit (Wallbox)compatible with the vehicle.You should preferably use the charging cableavailable as an accessory.For more information, contact a PEUGEOTdealer or a qualified workshop.During chargingWhile charging is in progress, unlockingthe vehicle will cause the charging to stop.If no action is taken on one of the openings(door or boot) or on the charging nozzle, thevehicle will lock again after 30 seconds andcharging will resume automatically.Never work under the bonnet:– Some areas remain very hot, even an hourafter charging ends - risk of burns! – Thefan may start at any time - risk of cuts orstrangulation!
The start of charging is confirmed by the flashinggreen CHARGE indicator lamps in the flap, thenthose on the control unit.If this is not the case, charging has notstarted; restart the procedure, ensuring that allconnections are properly established.The red indicator lamp in the flap comes on toindicate that the nozzle is locked.When charging is complete and while thecharging cable is still connected, openingthe driver's door will display the charge levelon the instrument panel for about 20 seconds.Accelerated charging, mode 3►Follow the accelerated charging unit(Wallbox) user instructions.►Remove the protective cover from thecharging nozzle.►Insert the nozzle into the charging connector.The start of charging is confirmed when thecharging indicator lamp in the flap flashes green.If this is not the case, charging has notstarted; restart the procedure, ensuring that theconnection has been properly established.The red indicator lamp in the flap comes on toindicate that the nozzle is locked.Superfast charging, mode 4►Depending on version, remove the protectivecover from the lower part of the connector.►Follow the instructions for use of the fastpublic charger and connect the cable fromthe fast public charger to the vehicle'sconnector.The start of charging is confirmed by the flashinggreen charging indicator lamp in the flap.If this is not the case, charging has notstarted; restart the procedure, ensuring that theconnection is properly established.The red indicator lamp in the flap comes on toindicate that the nozzle is locked.DisconnectionBefore disconnecting the nozzle from thecharging connector:►If the vehicle is unlocked, lock it and thenunlock it.►If the vehicle is locked, unlock it.Practical information1877by the charging indicator lamp coming on inblue).Charging procedureConnection►Before charging, check that the drive selectoris in mode P, otherwise charging is notpossible.►Open the charging flap by pressing the push-button, and check that there are no foreignbodies on the charging connector.Domestic charging, mode 2►Connect the charging cable from the controlunit to the domestic socket.When the connection is made, all of the indicatorlamps on the control unit light up, then only thePOWER indicator lamp remains on in green.►Remove the protective cover from thecharging nozzle.►Insert the nozzle into the charging connector.
Superfast charging, mode 4The end of charging is indicated by the chargerand by the fixed lighting of the green indicatorlamp in the flap.►You can also pause charging bypressing this button in the flap (inmode 4 only).►Hang up the nozzle on the charger.►Depending on version, replace the protectivecover on the lower section and close thecharging flap.When the charging nozzle is disconnected,a message on the instrument panelindicates that charging is complete, even ifthe charging nozzle was disconnected beforefull charging was completed.Towing deviceLoad distribution►Distribute the load in the trailer so that theheaviest items are as close as possible tothe axle, and the nose weight approaches themaximum permitted without exceeding it.Air density decreases with altitude, thus reducingengine performance. The maximum towable loadmust be reduced by 10% per 1,000 metres ofaltitude.Use genuine towing devices and wiringharnesses approved by PEUGEOT. Werecommend having them fitted by aPEUGEOT dealer or a qualified workshop.If not fitted by a PEUGEOT dealer, they muststill be fitted in accordance with the vehiclemanufacturer's instructions.Certain driving or manoeuvring aid functionsare automatically deactivated while anapproved towing system is in use.For more information about driving with atowing device fitted to a trailer and associatedwith the Trailer stability assist, refer to thecorresponding section.Comply with the maximum authorisedtowable weight, as indicated on yourvehicle's registration certificate, on themanufacturer's label and in the Technicaldata section of this guide.If using accessories attached to the towingdevice (e.g. bicycle carriers, tow boxes):– Comply with the maximum authorised noseweight.– Do not transport more than 4 conventionalbicycles or 2 electric bicycles.When loading bicycles onto a bicycle carrieron a towball, be sure to place the heaviestbicycles as close as possible to the vehicle.Observe the legislation in force in thecountry where you are driving.Practical information188The red indicator lamp in the charging flapgoes out to confirm that the charging nozzle isunlocked.►In modes 2 and 3, remove the chargingnozzle within 30 seconds.The charging indicator lamp comes on in white.With selective door unlocking activated,press the unlocking button twice todisconnect the charging nozzle.When charging is complete, the greencharging indicator lamp in the flap goesout after about 2 minutes.Domestic charging, mode 2The end of charging is confirmed when thegreen CHARGE indicator lamp on the controlunit and the green charging indicator lamp in theflap come on fixed.►Replace the protective cover on the chargingnozzle and close the charging flap.►Disconnect the control unit end of thecharging cable from the domestic socket.Accelerated charging, mode 3The end of charging is indicated by the chargingcontrol unit and by the fixed lighting of the greenindicator lamp in the flap.►Hang up the nozzle on the charging unit andclose the charging flap.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131