Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2024-2025 In the event of a breakdown Spare wheel

►Remove the kit and stow it.►Refit the cap on the valve.Spare wheelVisit this link to view explanatory videos:http://q-r.to/bagGl9For more information on the Tool kit, referto the corresponding section.Accessing the spare wheelThe spare wheel is stored in the boot, under thefloor.To access the spare wheel, first refer to the Toolkit section.Depending on version, the spare wheelmay be a standard steel, non-standard or'space-saver' wheel.To access the spare wheel, it is imperativeto tilt the backrests of row 3 seats beforelifting the row.From the trunk, pull the side straps to unlock thebench and lift seats to access the spare wheel.Position of row 3 seats while accessingthe tools is temporary. Make sure toreposition the seats before driving.Removing the spare wheel►Slacken the central nut.►Remove the fastening device (nut and bolt).►Lift the spare wheel towards you from therear.►Take the wheel out of the boot.Putting the spare wheel back in placeThe punctured wheel cannot be put underthe boot floor.In the event of a breakdown206
►Put the spare wheel back in place in itshousing.►Slacken the nut on the bolt by a few turns.►Position the fastening device (nut and bolt) inthe middle of the wheel.►Tighten the central nut sufficiently to retainthe wheel correctly.►Put the tool box back in place in the middle ofthe wheel and clip it in place.Removing a wheelParking the vehicleImmobilise the vehicle where it does notobstruct traffic: the ground must be level,stable and non-slippery.With an automatic gearbox, select mode Pto lock the wheels, apply the parking brake,unless it is set to automatic mode, and switchoff the ignition.Check that the parking brake indicator lampson the instrument panel are on fixed.The occupants must get out of the vehicleand wait where they are safe.If necessary, place a chock under the wheeldiagonally opposite the wheel to be changed,specially for electric vehicles.Never go underneath a vehicle raised using ajack; use an axle stand.Wheel with wheel trimWhen removing the wheel, first removethe wheel trim by pulling with both hands onone of the upper arms.When refitting the wheel, refit the wheeltrim, starting by placing its aperture in linewith the valve and then pushing it into placeall round its edge with the palm of your hand.– If the vehicle has steel wheels, remove thewheel trim.– If the vehicle has alloy wheels, remove thecentral bolt cover using tool 7.In the event of a breakdown2078
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131