Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2024-2025 Ease of use and comfort Front seats

Before moving the seat backwards, ensurethat there is no person or object that mightprevent the full travel of the seat.There is a risk of trapping or pinchingpassengers if present in the rear seats or ofjamming the seat if large objects are placedon the floor behind the seat.Front head restraintsAdjusting the heightUpwards:►Pull the head restraint up to the desiredposition; you can feel the head restraintclicking into position.Downwards:►Depending on equipment, press lug A orbutton B and then, while still pressing, lowerthe head restraint.The head restraint is correctly adjustedwhen its upper edge is level with the topof the head.Removing a head restraint►Pull the head restraint fully up.►Press lug A to release the head restraint andraise it fully.►Stow the head restraint securely.Refitting a head restraint►Insert the head restraint rods into the guidesin the corresponding seat backrest.►Push the head restraint fully down.►Press the lug A to release the head restraintand push it down.►Adjust the height of the head restraint.Never drive with the head restraintsremoved; they should be in place andadjusted for the occupant of the seat.Manually-adjustable seatsLongitudinal►Raise the control bar and slide the seatforwards or backwards.►Release the control bar to lock the seat inposition on one of the notches.After adjustment, try to move the seatbackwards and forwards to ensure that theseat is properly locked in place.Height►Pull the control upwards to raise or pushit downwards to lower, until you obtain theposition required.Backrest angle►Turn the knob to obtain the desired angle."AGR" certified seatsIn addition to the manual adjustments, this seatfeatures manual adjustment of the seat cushionlength, electric adjustment of the seat cushionangle and the electric lumbar adjustment.Ease of use and comfort473Front seats
Seat cushion length►Pull the handle forwards to release thecushion, then move the front part of thecushion forwards or backwards.Seat cushion angle►Press and hold the front or rear of the buttonto raise or lower the front part of the seatcushion.Electric lumbar adjustmentThe control allows independent adjustment ofthe depth and vertical position of the lumbarsupport.►Press and hold the front or rear ofthe control to increase or reduce thelumbar support.►Press and hold the top or bottom of thecontrol to raise or lower the lumbar supportarea.Electrically-adjustable seatsFor safety reasons, seat adjustmentsmust only be made when the vehicle isstationary.To avoid draining the battery, carry outthese adjustments with the engine running.This seat also features the manual adjustmentof the seat cushion length and electric lumbarsupport adjustment mentioned previously.Longitudinal►Push the control forwards or backwards toslide the seat.Cushion height and angle►Tilt the rear of the control upwards ordownwards to obtain the required height.►Tilt the front of the control upwards ordownwards to obtain the required angle.Backrest angle►Tilt the control forwards or rearwards.Memorising drivingpositionsAssociated with the electrically-adjusted driver’sseat, this function allows two driving positionsto be memorised, to make these adjustmentseasier if there are frequent driver changes.It records the electric adjustments made to theseat and door mirrors.Ease of use and comfort48
Using buttons 1/2/M►Enter the vehicle and switch the ignition on.►Adjust the seat and the door mirrors.►Press button M, then press button 1 or 2within 4 seconds.An audible signal confirms the memorisation.Up to 3 keys can be set up. Memorising anew position with one key cancels the previousposition linked to this key.Using the Smart Seat functionThe function is previously activated.►Enter the vehicle and switch the ignition on.►Adjust the seat and the door mirrors.►Press button M.►Within 5 seconds after pressing button M,press unlock button of the electronic keyduring at least 2 seconds.An audible signal confirms the memorisation.Up to 3 keys can be set up. Memorising anew position with one key cancels the previousposition linked to this key.Activation/DeactivationThe Smart Seat function is config-ured in the Settings > Vehicle touchscreen application.►Then select Vehicle Access > Smart Seat.►Press to activate/deactivate.Recalling a stored positionWhile the seat is moving, take carethat no person or object hinders theautomatic movement of the seat.With the ignition on or engine runningTo recall the corresponding position using thebuttons:►Press button 1 or 2.When unlocking the vehicle with theelectronic keyTo recall the corresponding position using theSmart Seat function:►Press the unlock button of the electronic key.or►Press the driver's door handle with theelectronic key on you.or►Approach the vehicle with the electronic keyon you.The driver's seat is moved when the driver'sdoor is opened.In both casesAn audible signal sounds when adjustment iscomplete.You can interrupt the current movement bypressing button M, 1 or 2 or by using one of theseat adjustment controls.A stored position cannot be recalled whiledriving.The recalling of stored positions is deactivated45 seconds after switching off the ignition.Heated and/or ventilatedseatsThe heating function is active only withthe engine running and when the outsidetemperature is below 20°C.Activation/DeactivationPress the centre button of the lumbaradjustment controls.orPress the Seats application.►Select the Heating Functions or VentilatedSeats tab.►Select the driver or passenger seat.Ease of use and comfort493
The corresponding page is displayed with thelast memorised settings.If the settings are suitable, press toactivate/deactivate the function in theSeat application.If no action is taken, the display returns to itsinitial state.The function status is not memorised when theignition is switched off.Changing settings►In the Heating Functions or VentilatedSeats page, select the relevant seat.►Select an intensity from the three presetlevels: "1" (Low), "2" (Normal) or "3" (High).The settings are memorised when the ignition isswitched off.Do not use the function when the seatis not occupied.Reduce the heating intensity as soon aspossible.When the seat and passenger compartmenthave reached a satisfactory temperature,switch the function off; reducing electricalconsumption in turn decreases energyconsumption.Prolonged use of heated seats is notrecommended for people with sensitiveskin.There is a risk of burns for people whoseperception of heat is impaired (e.g. illness,taking medication).To keep the heated pad intact and to preventa short circuit:– Do not place heavy or sharp objects on theseat.– Do not kneel or stand on the seat.– Do not spill liquids onto the seat.– Never use the heating function if the seat isdamp.Adaptive bolstersThis function provides better lateral and lumbarsupport for the driver and front passenger.The position is set by inflating/deflating theadaptive bolster using the corresponding pagein the touch screen.It is possible to store the position setting andalso to recall the stored position later.SettingsPress the centre button of the lumbaradjustment controls.orPress the Seats application.►Select the Bolster tab.►Select the driver or passenger seat.By default, the initial setting is in the middleposition.►Press buttons "+" or "-", or move the slider tothe desired setting.►Slide to the left/right for quick and easydeflation/inflation of the adaptive bolster.The modifications are taken into accountimmediately and are visible on the animation ofthe corresponding seat in the page.The setting can be reduced to theminimum ("1"), but the function is notcompletely disabled.The settings for this function can be stored withthe buttons M/2/1 or with the electronic key.For more information on Memorising drivingpositions, refer to the corresponding section.MalfunctionIn the event of a malfunction, a message isdisplayed in the touch screen.The message may be displayed when openingthe Bolster tab or during setting the position.Go to a PEUGEOT dealer or a qualifiedworkshop.Ease of use and comfort50
Activation/DeactivationPress the centre button of the lumbaradjustment controls.orPress the Seats application.►Select the Massage tab.►Select the driver or passenger seat.The corresponding page is displayed with thelast memorised settings.If the settings are suitable, press toactivate/deactivate the function in theSeat application.If no action is taken, the display returns to itsinitial state.The function status is not memorised when theignition is switched off.Changing settings►In the Massage page, select the seatconcerned.►Select a massage intensity from the threepreset levels: "1" (Low), "2" (Normal) or "3"(High).►Select another type of massage from thoseoffered.The modifications are taken into accountimmediately and memorised when the ignition isswitched off.Once activated, the system starts a one hourmassage cycle, made up of sequences of 6minutes of massage followed by 4 minutes atrest.The system stops automatically at the end of thecycle.Seat modularityIt is prohibited to drive with a secondrow backrest folded in cargo version(for transporting objects), while a passengeroccupies a third row rear seat.In order to easily adapt your interior space,you can fold all the seats. This gives you acontinuous load floor up to the back of thefront seats. Folding or unfolding the seatsmust only be done with the vehicle stationary.Configuration examples for30085 seats4 seats3 seatsTransport of objectsConfiguration examples for50087 seats5 seats4 seatsTransport of objectsEase of use and comfort513Multipoint massageSystem with a choice of type of massage andadjustment of its intensity.This system operates with the engine running,as well as in STOP mode of the Stop & Start.
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131