Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2024-2025 Driving Drive Assist Plus

5.Activation of cruise control in progress Usethe speed suggested by the Road signsrecognition functionFor more information on the Road signsrecognition function, refer to the correspondingsection.Information displayed onthe instrument panel6.Cruise control mode selection indication7.Cruise control on (green)/Pause (grey)indication8.Speed setting value9.Speed suggested by the Road signsrecognition function (depending on version)Switching on/Pausing►Press 1-ASSIST to select the cruise controlmode; the function is paused (grey).►Press 3, 4 or press 5-OK to activate thecruise control and save a speed settingas soon as the vehicle speed reaches thedesired level (green).►Pressing 2-II> temporarily pauses thefunction.►Pressing 2-II>, 3, 4 or 5-OK again willreactivate cruise control (green).Cruise control operation is also temporarilyinterrupted (pause):– by pressing the brake pedal.– automatically, if the electronic stabilitycontrol (ESC) system is triggered.– by shifting to neutral or engaging reversegear.– by using the electric parking brake.Modifying the speed settingThe cruise control must be active.To change the speed setting using the vehicle’scurrent speed:►For steps of +/- 1 mph (1 km/h), makesuccessive short presses on 3 to increase or4 to decrease.►For steps of +/- 5 mph (5 km/h), press andhold on 3 to increase or 4 to decrease.Prolonged pressing and holding on 3 or4 causes a very rapid change in vehiclespeed.As a precaution, we recommend settinga cruise speed fairly close to the currentspeed of your vehicle, to avoid any suddenacceleration or deceleration of the vehicle.When the function is activated, the speedsetting value can be changed using the speedsuggested by the Road signs recognitionfunction displayed on the instrument panel:– When passing the sign:►Press 5-OK to save the suggested speed.This value is then immediately shown as the newspeed setting on the instrument panel.– After passing the sign:►Press 5-OK. The message "OK?" isdisplayed to confirm the request to save.►Press 5-OK again to save the suggestedspeed. The new speed setting value isdisplayed on the instrument panel.Off►Press 1: the cruise control information displaydisappears.MalfunctionIn the event of a malfunction, dashes aredisplayed flashing and then fixed instead of thespeed setting.Have it checked by a PEUGEOT dealer or aqualified workshop.Drive Assist PlusThis system automatically adjusts the speedand corrects the trajectory of the vehicle, usingAdaptive cruise control with Stop&Go function inconjunction with Lane positioning assist.These two functions must be activated and inoperation.Driving1356
For more information on Adaptive cruisecontrol and Lane positioning assist, refer tothe corresponding sections.The system assists the driver by actingon the steering, acceleration and brakingwithin the physical limits and capacitiesof the vehicle. Certain road infrastructureelements or vehicles in the surroundingsmay not be properly seen or may be poorlyinterpreted by the camera and radar, resultingin an unexpected change in direction, a lackof steering correction and/or inappropriatemanagement of acceleration or braking.Primarily designed for driving on mainroads and motorways, this system onlyworks with moving vehicles driving in thesame direction as your vehicle.Selecting/Deselecting thesystem►Press this button successively until theDrive Assist Plus mode is displayed on theinstrument panel.ASSIST►After a few seconds, the Drive Assist Plusmode is selected. The Driving aids area isdisplayed on the instrument panel.The colour of the symbols,representing the steering wheeland the side lines, depends on theoperating state of the system:(grey) One or more operating con-ditions is not met; the system ispaused.(green) All operating conditions aremet; the system is active.(orange) System malfunction.►Press this button successively again until theOFF mode is displayed on the instrumentpanel.►After a few seconds, the Drive Assist Plusmode is deselected. The Driving aids areadisappears.Drive Assist Plus 2.0This system automatically regulates the speedand corrects the trajectory of the vehicle bycombining the following functions:– Drive Assist Plus with Adaptive cruise controlwith Stop&Go function and Lane positioningassist.– Semi-automatic lane changing.– Speed setting advance recommendation.For more information on these functions, refer tothe corresponding sections.The availability of the system depends on thecountry you are driving in.This system is only to be used on eligiblemotorways and main roads.Selecting/Deselecting thesystemIt is configured in the ADAS touchscreen application.►Select the Functions tab, then select/deselect Drive Assist.The system's status is saved when the ignition isswitched off.Adaptive cruise controlFor more information, refer to the Generalrecommendations on the use of drivingand manoeuvring aids and the Specificrecommendations on cruise control.This system automatically maintains the vehiclespeed at a value set by the driver (speedsetting), while respecting a safety distance fromthe vehicle in front (target vehicle) previously setby the driver. The system automatically managesthe acceleration and deceleration of the vehicle.With the Stop function (with the EAT6automatic gearbox), the system managesbraking until the vehicle comes to a completestop.With the Stop & Go function (with the e-DCS6/7 automatic gearbox or drive selector), theDriving136
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131