Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-frontend" was enqueued with dependencies that are not registered: jquery-ui-position. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131

Owner Manuals

Peugeot 3008 2024-2025 Driving Distraction detection

These warning lamps light upon the instrument panel toindicate that the driver's and/orfront passenger's seat beltis not fastened (depending on version). Theautomatic braking system is deactivated until theseat belts are fastened.Distraction detectionFor more information, refer to the Generalrecommendations on the use of drivingand manoeuvring aids.The function comprises the "Driver AttentionWarning" system combined with the "DriverAttention Warning by Camera" system.These systems are in no way designed tokeep the driver awake or to prevent thedriver from falling asleep at the wheel.It is the driver’s responsibility to stop if feelingtired.Take a break if you are feeling tired or at leastevery 2 hours.These systems reset themselves if one of thefollowing conditions is met: – The ignition hasbeen switched off for a few minutes.– The driver's seat belt is unfastened and theirdoor is opened.Driver Attention WarningThe system triggers an alert when itdetects that the driver has not takena break after two hours of driving at aspeed above 40 mph (65 km/h).This alert is issued via the display of amessage encouraging the driver to take a break,accompanied by an audible signal.If the driver does not follow this advice, the alertis repeated hourly until the vehicle is stopped.As soon as the speed of the vehicle dropsbelow 40 mph (65 km/h), the system goesinto standby.Driving time starts being counted again oncethe speed reaches above 40 mph (65 km/h).Driver Attention Warning byCameraThe system assesses the driver's levelof alertness, fatigue and distractionby identifying trajectory changes inrelation to the lane markings.To do this, the system uses a camera, placed onthe upper part of the windscreen.This system is particularly suited to fast roads(speed higher than 40 mph (65 km/h)).The system may perform a learningprocedure for up to 30 minutes after thestart of the monitoring.During this period, the driver's individualdriving behaviour is analysed and no alert isgiven.At a first alert level, the driver is warned bythe message "Caution!", accompanied by anaudible signal.After three first-level alerts, the system triggersa further alert with the message "Driving atrisk: Take a break", accompanied by a morepronounced audible signal.In certain driving conditions (poor roadsurface or strong winds), the system maygive alerts independent of the driver's level ofvigilance.Driving1536
The following situations may interfere withthe operation of the system or prevent itfrom working:– Lane positioning assist is active.– poor visibility (e.g. inadequate streetlighting, heavy rain, thick fog, snowfall).– dazzle (e.g. headlamps of an oncomingvehicle, low sun, reflections on a damp road,leaving a tunnel, alternating shade and light).– windscreen area located in front of thecamera (e.g. dirty, misted, frost-covered,snow-covered, damaged or masked by asticker).– lane markings absent, worn, hidden(e.g. snow, mud, dead leaves) or multiple(roadworks).– close to the vehicle ahead (lane markingsnot detected).– roads that are narrow, winding.Risk of undesirable operationThe system should be deactivated in thefollowing situations:– When a "space-saver" spare wheel is fitted.– When the vehicle is towed.– Driving on off-road.– Driving on racing circuits.Deactivation/ActivationDue to legal requirements, the system can onlybe deactivated in the vehicle personalizationuntil the next time the ignition is reactivated.The system is automatically activated by defaultevery time the engine is started.The settings are changed via theADAS touch screen application.orDirect access to the Shortcuts for driving aids.Deactivation is confirmed by the illu-mination of this indicator lamp on theinstrument panel.Driver Attention Warning by Camera/Safety modeIf the driver's drowsiness is detected, theLane keeping assist and Active Safety Brakesystems are automatically reactivated (if theyhave been deactivated by the driver in theADAS touch screen application) and theCollision Risk Alert function trigger thresholdis set to its most sensitive value.It is recommended to deactivate distractiondetection in the ADAS touch screenapplication in the same cases as those forwhich it is recommended to deactivate theLane keeping assist and Active Safety Brakesystems.MalfunctionThis warning lamp lights up on theinstrument panel with the message"Audible Warning System fault:Repair needed" if the audible warningsystem is in failure.The system may be disturbed or unavailable.Have it checked by a PEUGEOT dealer or aqualified workshop.In the event of a malfunction, thiswarning lamp lights up on theinstrument panel, accompanied by thedisplay of a message and an audiblesignal.Have it checked by a PEUGEOT dealer or aqualified workshop.This warning lamp lights up on theinstrument panel with the message"Driving Assistance Sensor blind:Clean sensor, see User Manual" ifthe sensor is masked.This is a normal behavior, which does notrequest the support of a qualified workshop.In this case, stop the vehicle and verify if thefront camera is covered by dirt, mud, sand,snow, ice or anything preventing the sensing.The system is operational again after thedetection field has been cleaned.Lane keeping assistDue to legal requirements,the systemcan only be deactivated in the vehiclepersonalization until the next time the ignitionis reactivated.The system is automaticallyactivated by default every time the engine isstarted.The system will inform the driver witha message and a chime if there is anongoing correction for more than 10s. If thedriver is still unable to keep the vehicle inthe lane, the correction interrupts after a shorttime.Driving154
Scroll to Top

Notice: Function WP_Scripts::add was called incorrectly. The script with the handle "elementor-pro-frontend" was enqueued with dependencies that are not registered: elementor-pro-webpack-runtime. Please see Debugging in WordPress for more information. (This message was added in version 6.9.1.) in /home/u918277800/domains/ownersmanual.store/public_html/wp-includes/functions.php on line 6131